Pressure & Vacuum Gauges - Page 38

Manufacturer: GOSS Brand: Goss

GOSS LOW PRESSURE GAUGE FOR E25 REGULATORS

Manufacturer: CME Brand: CME Tools

Adjustable Parallel Sets 3/8" to 1-1/4" *Consists of two precision ground pieces which slide smoothly on each other. *locked into position by screws. *Can be quickly inserted into openings and expanded to exact size, then measured with a micrometer.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1150-D

Sintered pressure snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes. This eliminates instrument failure due to pressure shock. Snubbing action is achieved by utilizing a corrosion resistant 316 stainless steel sintered disc. Provides long service life with no moving parts to wear out. Grade D disc is used in light oil applications. Made of brass. 1/2" NPT male. 1.125" Hex. 0.625" Thread length. 1.875" Height.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: TRI-HD-302L-E

These instruments have been designed to indicate temperature and pressure in a single unit. With a price that makes this an affordable option for applications where bronze internals are suitable for use, the use of a single 'tridicator' saves time during installation, amount of piping required and of course saves money versus using separate gauges and thermometers. The primary applications for this product are hot water boilers and water heaters.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-307-SS

These sensors are for use with Manometers, Magnehelic® Gages, Pressure Switches and other Controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input and discharge pressures, etc. The angled tips shown have 4" insertion depth. Each has four radially drilled .040" sensing holes. All except Model A-303 mount in 3/8" hole in duct. For portable use, a magnet holds No. A-303 in place. No. A-305 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-308 are suitable for use in low velocity systems or where the need for accuracy is less critical.

Manufacturer: Shenzhen TEREN Control Technology Co., Ltd. Brand: TEREN Model: D2L3

 Apply high accuracy MEMS sensor and digital technologies, can measure positive, negative or differential pressure. It can completely replace the traditional pointer mechanical gauges  It can measure fan and blower pressures, filter resistance, air velocity, pressure drop across orifice plates, differential pressure of medical or pharmaceutical machine, etc.  No any movable parts, no any effect on vibration.  With ultra-thin design of 33mm, it could be flush, surface or wall mount.  The accuracy is up to ±1% FS, with large LCD display

Manufacturer: Thuemling Instrument Group Brand: SPAN Model: LFS-210-30Hg/150PSI-G-KEMX

Freeze proof: The KEM-X Socket Saver is an internal diaphragm seal to prevent freezing, clogging, and corrosion. Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 15-120-30-vac/kPa

The NoShok 100 series steel case pressure gauge has brass wetted parts, a circular dial, a panel-mount connection, and measures pressure with a dual scale with an accuracy of + or - 2.5%. The brass wetted parts are for measuring non-corrosive liquid and gas pressure. The black painted steel case provides corrosion resistance and has a chrome triangular bezel and U-clamp for panel mounting. The dial comes in 1.5" (40 mm), 2" (50 mm), and 2.5" (63 mm) diameters with a clear front acrylic lens. The dial is white with black and red markings, is UV resistant, and has a molded plastic pointer. The gauge measures pressure with a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 1.5" gauge has a male connection with an 1/8" NPT (National Pipe Thread) rate. The 2" and 2.5" gauges have a male connection with 1/4" NPT rate. The bourdon tube is phosphor bronze. The movement is brass and nylon or all-brass with highly polished bearing surfaces. The gauge operates in fluctuating pressure up to 60% of the dial range and static pressure to 90% of the dial range. The ambient temperature for the gauge is 0 to 140 degrees F (-18 to 60 degrees C). The media temperature range is -4 to 140 degrees F (-20 to 60 degrees C). This pressure gauge is suitable for hydraulics and pneumatics and most industrial and commercial applications, including petrochemical, medical, food, and pharmaceutical.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative t...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2-5020

Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.

Manufacturer: Checkline Brand: Checkline

Graphite Tip, required for plastics (007-GT/DL-GT)