Pressure & Vacuum Gauges - Page 62

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2-5210

Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Minihelic II gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig. The Minihelic II gage is designed for panel mounting in a single 2-5/8" diameter hole. Standard pressure connections are barbed fittings for 3/16" ID tubing; optional 1/8" male NPT connections are also available. Over-pressure protection is built into the Minihelic II gage by means of a blow-out membrane molded in conjunction with the diaphragm. Accidental over-ranging up to the rated total pressure will not damage the gage. With removable lens and rear housing, the gage may be easily serviced at minimum cost. With the housing molded from mineral and glass filled nylon and the lens molded from acrylic, the gage will withstand rough use and exposure as well as high total pressure. The 5% accuracy and low cost of the Minihelic II gage make it well-suited for a wide variety of OEM and user applications. OEM applications include cabinet air purging, medical respiratory therapy equipment, air samplers, laminar flow hoods, and electronic air cooling systems. As an air filter gage, the Minihelic II gage finds many end use applications on large stationary engines, compressors, ventilators, and air handling units. The Minihelic II gage is suitable for many of the same applications as the Magnehelic gage where the greater accuracy, sensitivity, and higher and lower differential pressure ranges of the Magnehelic gage are not required.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF450-000-RT

Cf4.5 knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: MSSensors Brand: JDH Labs Tech

Pressure sensor for gas or for liquids, including Diesel, Gasoline and Oil derivates. Ideal for industrial applications. Robust Stainless steel body, Weatherproof IP67 grade. 0-5V linealized output ideal for interfacing with microcontroller based applications, PLC or Data acquisition boards. Ranges available: 0-100kPa, 0-200kPa, 0-500kPa and 0-1000kPa. Customization for 4-20mA and 0-10V output and other pressure ranges are also possible, please send us your request (additional costs may apply).

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 401DFW-254CH

This 401 series gauge line is a competitive line of ammonia gauges, designed with the original equipment manufacturers in mind. Available dry, glycerin filled or silicone filled, these gauges are suitable for use on most ammonia refrigeration systems. These gauges are liquid fillable. The liquid filling helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement (and keeping contaminates such as dirt away from all moving parts) which will extend the life of the gauge. Also the case and connection are welded preventing possible leakage at the bottom of the case. Although these gauges are the best mix of quality and price we also stock a full line of ammonia gauges available in various dial sizes, connections and case designs.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF600-000-N

Cf600 knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with bolt through holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 5150-E

The NoShok 316 stainless steel sintered snubber has a male connection, comes with one of five standard grade discs, and operates in pressures up to 15,000 psi (103,420 kPa). The snubber is stainless steel for operating in corrosive, high pressure, and high temperature environments. It is available in A, B, C, D, or E grade discs to accommodate specific applications. The grade A disc is for use with gases and has an average air flow estimate of 0.25 L/min at 1 psi. The grade B disc is for use with gases and water and has an average air flow estimate of 0.63 L/min at 1 psi. The grade C disc is for use with water and light oil and has an average air flow estimate of 1.46 L/min at 1 psi. The grade D disc with light oil and has an average air flow estimate of 2.79 L/min at 1 psi. The grade E disc is for use with heavy oil and has an average air flow estimate of 3.14 L/min at 1 psi. The male connection is either 1/4" or 1/2" NPT (National Pipe Thread) rate. This snubber increases gauge readability by smoothing out pressure surges, pulsations and spikes.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to ...

Manufacturer: CME Tools Brand: CME Tools

9 pcs universal angle block set 1/2 to 30 degree 9 pcs angle blocks set accurate angles quickly. Just load on vise and rest the workpiece at any angle you choose. Made of high quality hardened steel. Precision ground. HARDNESS: HRC50 TO 55 1/2 degree to 30 degree. Accuracy: 0.0003" Tolerance: +/- 10 seconds Including the following degrees of angle block: 1/2, 1, 2, 3, 4, 5 degree angle blocks (2-3/4x1-3/16 size) 10, 15, 30 degree master blocks (3 x 1-3/16 x 1-3/16 size) Any conveivable angles to these increments can be established. Lightly magnetized for better holding. Fitted in deluxe wooden box.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPGA-00

The Series DPGA is the only economic digital pressure gage with selectable engineering units on the market. With its 1% accuracy and digital push-button zero, the DPGA is the perfect choice for digitally monitoring the pressures of air and compatible gases.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 2202

Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.

Manufacturer: JH Gauge Brand: JH Gauge

DIFFERENTIAL PRESSURE GAUGE 0-20 INCH W.C.