Pressure & Vacuum Gauges - Page 82

Manufacturer: Tanis Brand: Tanis

5/8 x 30 Gauge Glass Brushes - 3 pack

Manufacturer: Winters Brand: Winters Model: PFP824R1

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-435

Dwyer Instruments manufactures measurement and control instruments, including pressure gauges, flow meters, level instrumentation, temperature instrumentation, and air quality monitors. The company, founded in 1931, is headquartered in Michigan City, IN.

Manufacturer: Winters Brand: Winters Model: PFP822

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Fluke Corporation Brand: Fluke Model: TP82

Flexible and formable 1-1/4" pin provides an easy connection past weather pack seals to connector conductors. Tested to over 60 VDC, these pins are a must-have for fuel injectors, TPS and MAP sensors, as well as for any underhood or under vehicle connector with weather pack seals. The bright yellow body stands out in an engine compartment to ensure they are not left behind. Easily connects to test leads that have removable ends. Banana jack accepts all DMM and banana jack leads.

Manufacturer: Winters Instruments Brand: Winters Model: NVA1000

Winters NVA Series Needle Valve. Straight Body, Soft Seat. Ideally suited for severe duty oil and gas installations including refineries and processing plants, water treatment plants, power plants and hydraulic applications. ASME B1.20.1 compliant. Material: Stainless Steel. NPT Connection: 1/4" Male x 1/4" Female. Max Pressure: 6,000 psi.

Manufacturer: Fluke Corporation Brand: Fluke Model: TP81

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads. Banana jack accepts all DMM and banana jack leads. Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead. For use with test leads with 4mm banana plugs. Tested to 60V DC.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 14E15B18GC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: Winters Instruments Brand: Winters Model: NVA1021

Winters NVA Series Needle Valve. Straight Body, Soft Seat. Ideally suited for severe duty oil and gas installations including refineries and processing plants, water treatment plants, power plants and hydraulic applications. ASME B1.20.1 compliant. Material: Stainless Steel. NPT Connection: 1/2" Female x 1/2" Female. Max Pressure: 6,000 psi.

Manufacturer: Winters Instruments Brand: Winters Model: NVA1001

Winters NVA Series Needle Valve. Straight Body, Soft Seat. Ideally suited for severe duty oil and gas installations including refineries and processing plants, water treatment plants, power plants and hydraulic applications. ASME B1.20.1 compliant. Material: Stainless Steel. NPT Connection: 1/2" Male x 1/2" Female. Max Pressure: 6,000 psi.