Conductivity Meters & Accessories - Page 22

Manufacturer: Thomas Scientific Brand: YSI Model: 060906

Each bottle includes detailed instructions and a table of corrections at temperatures between 20 and 30°C.

Manufacturer: Myron L Brand: Myron L Model: 532M1

Multi-Range Conductivity Meter, 0-50, 500, 5000 uS. Quickly determines the ppm/Total Dissolved Solids of almost any solution. It is lightweight and compact, yet Myron L’s DS is also tough, with rugged, taut-band meter movements. Myron L's unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

science-lab-conductivity-meters

Manufacturer: Hanna Instruments Brand: Hanna Instruments

The Hanna Instruments BL 983322-1 panel-mounted conductivity controller and indicator has automatic temperature compensation (ATC), automatic or manual dosing modes, an overtime control system, and an LED screen. ATC helps to increase accuracy of readings and eliminates the need for additional calculations. The overtime control system, which helps prevent overdosage, can be set for 5 to 30 minutes. If the relay runs longer than the specified time, it notifies the user and shuts off. The multi-color LED display confirms automatic or manual dosing mode, and whether the controller has exceeded the time limit. The controller has single-point calibrations and is cased in fire retardant acrylonitrile butadiene styrene (ABS) plastic. It comes with two plastic mounting brackets. This controller is commonly used for laboratory applications, including water conditioning. Measurement range is 0.00 to 19.99 us/cm, resolution is 0.01 us/cm, and accuracy is + or – 2% f.s. at 20 degrees C/68 degrees F. ATC operates from 5 to 50 degrees C/41 to 122 degrees F. The controller measures 83 x 53 x 99mm/3.3 x 2.1 x 3.9 inches (H x W x D), and it weighs 300g (10.6oz). (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) The controller requires the HI 7634-00 EC/TDS probe (sold separately), and operates on 115/230 Vac; 50/60 Hz power supply. A controller/transmitter reads parameters, and automatically adjusts the solution to the programmed set points. It is used to monitor and control parameters in process water, wastewater treatment, chemical processes, and aquaculture applications. Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) 9001 standards. What’s in the Box? Hanna Instr...

Manufacturer: Reed Brand: Reed Instruments Model: YK-30WA

The Reed YK-30WA is a portable conductivity tester with automatic temperature compensation and an LCD screen. This meter measures electrical conductivity from 0 to 1,999 microsiemens/cm for a wide range of water quality applications. It has automatic temperature compensation (ATC) for accurate readings in fluctuating temperatures. The LCD screen displays readings and indicators. Its cabled probe is useful for demonstrating before and after results of conditioning and filtration systems. The data hold function stores readings for later review. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity meters are used in research laboratories and a variety of industries, such as water-quality testing, waste-water treatment, hydroponics, agriculture, aquaculture, and cosmetics manufacturing.Reed Instruments manufactures test and measurement equipment such as pressure gauges, electrical testers, temperature and humidity instrumentation, and inspection instruments. The company, founded in 2004, is headquartered in Wilmington, NC.What's...

Manufacturer: COLE-PARMER Brand: Oakton

Flat measurement surface allows for readings in sample volumes down to 500 uL Compatible with Oakton CON 11, CON 110, CON 400, and CON 410 meters

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product description ITO glass has the property of low sheet resistance and high transmittance, and it is widely used in the production and research of OLED, OPV, electrochromic device, e-book, electrochemistry, Low-Temperature Solution-Processed Perovskite Solar Cells, et al. Technical Datas  Size:100*40*1.1mm Sheet Resistance:< 7 ohm/sq Transmittance:>77% Thickness of the ITO Layer:2200+/-300A Luster of the ITO Layer:Green Color of the Cross Section:Yellow green Package included:25 pcs ITO glass Friendly Reminder When purchase, please confirm the product is from our Huanyu Instrument, otherwise we can't ensure the quality and after-sale service.We will try our best to provide you the best product and service, welcome to buy our product.

Manufacturer: HM Digital Brand: HM Digital

The TDS Meter helps you put a number on what your taste buds are already telling you about what's in your water. It measures for totally dissolved solids in water that can give it a taste. The higher the reading on the water the more substances dissolved in your water.The meter is primarily used to indicate ZeroWater filter replacement at 006. It may also be used as a simple method to compare water quality by displaying the Total of the Dissolved Solids (TDS) in parts per million only. The meter does not specify what substances comprise the Total. The meter should not be used to assess the safety or purity of water, which should only be undertaken by a qualified laboratory. The meter is produced by a in independent laboratory supply company, not Zero Technologies, LLC. Operates on two 1.5v button cell batteries that are included. Batteries are readily available and easily changed when needed The ZeroWater TDS Meter is designed to fit into the reservoir of the ZeroWater pitcher for storage.. .HM Digital ZT-2 TDS Meter Specifications: Range: 0 - 999 ppm (mg/L) Resolution: 1 ppm (0-999 ppm) Accuracy: +/- 3%Conversion Factor: NaCl (avg. 0.5)Power source: 2 x 1.5V button cell batteries (included)(357A)Battery life: Approx. 1000 hours of usageDimensions: 14 x 2.3 x 1.5 cm (5.5 x 0.9 x 0.75 inches)Meter weight: 31.2g (1.1 oz) HM Digital Part#:ZT-2 (Package Of 6)

Manufacturer: COLE-PARMER Brand: Oakton

science-lab-conductivity-meters

Manufacturer: Pathfinder Instruments Brand: Pathfinder

The CS-5000 is a flat surface High Density graphite and CPVC Conductivity Electrode K=2.5, W/25Ft Cable