|
|
-
4.1 of 5.0 with 46 Reviews
SALE PRICE: $126.00
Manufacturer: Atlas Scientific
Manufacturer: Atlas Scientific
|
Scientific Grade Laboratory Testing Conductivity Probe K 1.0 for Water Meter. Atlas Scientific is the industry leader in embedded chemical sensing. This highly specialized company focuses all of its resources on manufacturing the best chemical sensors and test chemicals on the market today. Atlas Scientific proudly offers its technology to individuals, industry professionals, and defense contractors worldwide. Characteristics: Scientific Grade Conductivity Probe is great for laboratory testing or long-term field use. Conductivity Probe can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. Fast response time: Reaches 90% of full value in less than 1 seconds. conductivity test probe, has a cell constant of K 1.0 When this conductivity probe is connected to an Atlas Scientific EZO conductivity circuit, it has a range of 5 µS/cm to 200,000 µS/cm Conductivity probe works by measuring the electrical current of the water between two graphite plates.The plates do not go bad, or change, so recalibration is not necessary. After the first calibration your Conductivity probe is good to go.
-
4.1 of 5.0 with 40 Reviews
SALE PRICE: $130.25 1% OFF
Manufacturer: General Tools & Instruments
Brand: General Tools
Model: DCM4300
Manufacturer: General Tools & Instruments
Brand: General Tools
Model: DCM4300
|
The General Tools and Instruments DCM4300 Digital Conductivity Meter is an industrial tool used for measuring the conductivity of solutions. Features jumbo LCD display with 0.84 inch digit height; makes read-outs clear and easy to read. Meter features data hold, convenient for data logging and measuring delta; RS-232 interface. Unit is both CE and RoHS approved; power source is a 9V battery (not included). Instrument includes the CP4300 conductivity probe, also accepts General Tools CTOP2001 (conductivity/TDS probe); comes with hard case, user's manual, and 1-Year Limited Warranty.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction guaranteed. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
-
4.1 of 5.0 with 17 Reviews
SALE PRICE: $132.20 1% OFF
Manufacturer: Thermo Scientific
Brand: Oakton
Model: WD-35607-56
Manufacturer: Thermo Scientific
Brand: Oakton
Model: WD-35607-56
Each conductivity/TDS cell features a 3-ft cable and a two-band platinum sensor. Glass body cells have a temperature range of 0 to 100°C.
-
4.1 of 5.0 with 22 Reviews
SALE PRICE: $147.00
Manufacturer: YSI
Brand: YSI
Manufacturer: YSI
Brand: YSI
|
The EcoSense EC30A Conductivity/TDS/Temperature Pen is a pen-style conductivity, total dissolved solids (TDS), and temperature tester with automatic temperature compensation, one- or two-point calibration, graphic LCD screen with onscreen instructions, and manual or auto-ranging for conductivity or TDS. It has a user-replaceable electrode, an electrode cap, a belt clip, and an IP67-rated waterproof case. The memory can store 50 data sets. Conductivity meters are commonly used in the water-quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research. SpecificationsSpecifications Conductivity range 0.0μS to 19.90mS Conductivity resolution 0 to 1990 μS/cm, 5 μS/cm, 2.00 to 19.90 mS/cm, 0.05 mS/cm Conductivity accuracy + or - 1% Full Scale TDS range 0 mg/L to 10.00 g/L TDS resolution 0 to 1000 mg/L, 5 mg/L, 1.00 to 10.00 g/L, 0.05 g/L TDS accuracy + or - 1% Full Scale Temperature range 0.0 to 99.5 degrees C (32.0 to 212.0 degrees F) Power source Four LR44 alkaline batteries Data management features 50 data-set memory Weight (with batteries) 105g (3.7 ounces)  Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivit...
-
4.1 of 5.0 with 7 Reviews
SALE PRICE: $156.43
Manufacturer: iPower Distributor L&G
Brand: Milwaukee
Model: 716678
Manufacturer: iPower Distributor L&G
Brand: Milwaukee
Model: 716678
Standard pH/EC/TDS combo mini-bench meter for quick and reliable measurements. Range: 0.00 - 14.00 pH, 0 - 4000 ppm, 0.00 - 6.00 mS/cm, Accuracy: 0.20 pH and 2% full scale for EC & TDS, comes with SE600 combo probe, 110 volt power supply, unit mounting kit, a 20 ml sachet of calibration solution of pH 7.01, 1500 ppm and 1413 S/cm. Faster processor with the new chipset and motherboard with a 100% larger & easier to read LED display. Converts to a 9 volt battery for use as a portable field meter (9 volt battery included).
-
4.1 of 5.0 with 5 Reviews
SALE PRICE: $169.42 1% OFF
Manufacturer: YSI
Brand: YSI
Manufacturer: YSI
Brand: YSI
|
Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the solution is, for example, contaminated or contains too much saline. In general, pure solutions, such as distilled water, have low conductivity. More saline- or nutrient-rich solutions, such as seawater or fertilizers, have high conductivity. Conductivity measurements are often used with total dissolved solids (TDS) measurements, which are typically expressed in ppm (parts per million). TDS consist of dissolved minerals and salts. To determine the amount of TDS, conductivity is measured, and the result is converted to a TDS measurement. Different meters provide results for conductivity, TDS, or both, and the application determines meter selection. Conductivity meters are used in research laboratories and a variety of industries, such as water-quality testing, waste-water treatment, hydroponics, agriculture, aquaculture, and cosmetics manufacturing.YSI manufactures instruments, sensors, and software for environmental water quality monitoring and testing. The company, founded in 1948, is headquartered in Yellow Springs, OH.
-
4.0 of 5.0 with 19 Reviews
SALE PRICE: $7.79 2% OFF
Manufacturer: Slaxry
Brand: Slaxry
Manufacturer: Slaxry
Brand: Slaxry
Size: 5.5" * 1" * 0.6"   Salt Range: 0-9990ppm or 0.000-0.999%   If the meter reads 500 x 10 ppm that means 500 x 10 = 5000 ppm = 0.5%   Press hold button to keep current reading on display, allowing the meter to be removed from the water and read   Temperature Range: 1-50 °C (Does NOT display in F)   ONLY will work for Salt Water Pool and Koi Fish Pond Salt level testing!   CANNOT work for Sea/Marine/Salt Water Fish Tank Salt level testing!   CANNOT work for Food salt level testing!   CANNOT work for any other application!   It is NOT waterproof!   Package includes: 1 x Digital Salt Salinity Tester Meter
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $9.20 2% OFF
Manufacturer: HuntGold
Brand: HuntGold
Color: As pictures show
Manufacturer: HuntGold
Brand: HuntGold
Color: As pictures show
Ideal for all water purification applications, wastewater regulation, aquaculture and hydroponicsPerfect for both residential or commercial usePortable unit - includes a carrying caseAdvanced microprocessor technology allows you to test the water with accuracyHold Function saves measurements for convenient reading and recordingAuto-off function automatically shuts off after 10 minutes of non-useMeasurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppmAlso available in "x10" mode: Reads in increments only of 10 ppm (0-9990 ppm)Built-in digital thermometerSpecifications:TDS Range: 0 - 9990 ppm (mg/L)Temp. Range: 0 - 80CResolution: 1 ppm, 1 C (also available in 10 ppm)Accuracy: +/- 2%ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50¡æ(33F to 122F)Power source: 2 * 1.5V button cell batteries (Battery included)
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $25.99 37% OFF
Manufacturer: NorSway
Brand: NorSway
Model: TDS-3C
Color: Blue
Manufacturer: NorSway
Brand: NorSway
Model: TDS-3C
Color: Blue
|
Function: 1. Check the performance of your water filter; 2. Check for hardness (1 grain=17ppm); 3. Make sure you always drink pure water; Instructions: 1. Remove the cap from the pen and turn it on; 2. Immerse the pen into the test water/ solution but not more than 2"; 3. Waiting until the display stabilizes, the TDS meter compensates for temperature variations automatically, once the readout is stable (30 to 45 seconds), press the hold button to save the value and then read it; 4. After using, shake off water from your meter or wipe it with a tissue. An affordable way to test your swimming pool, aquarium, tap water, reverse osmosis filter, or appliance water source, you can finally know whether the water you are drinking or using is acceptable for the application. Specifications 1. Measuring range: 0-9990ppm 2. Accuracy:+/-2% 3. Batteries: 2x 1.5V LR44 button cells 4. Auto shut-off: 10 minutes 5. Operating temperature: 0-50℃ / 32-122°F 6. ATC(Automatic Temperature Compensation): 0-60℃/ 140°F 7. Weight: 76g/1.13Oz 8. Dimensions: 155*31*23mm(6.1"*1.2"*0.9") Package includes: 1x TDS Meter 2x 1.5V LR44 button cells (Built-in) 1x Carrying case 1x User's manual Note: * Do not use this TDS meter with hot or running water; * Please make sure liquid level is below 1.5 inch when testing; * This meter is calibrated from the factory and does not require any adjustment. * This TDS meter can not test the water ph value, if you want a high accuracy ph meter, please refer to this link: https://www.amazon.com/dp/B01IB2TIBK
-
4.0 of 5.0 with 6 Reviews
SALE PRICE: $27.99 18% OFF
Manufacturer: NEWGATE
Brand: i-mesh-bean
Manufacturer: NEWGATE
Brand: i-mesh-bean
Package includes:
1 x Digital pH meter;
1 x TDS Meter Tester;
2 × Calibration Buffer Powder;
1 x Calibration Adjustment screwdriver;
5 x Batteries;
2 x Carrying cases;
2 x User manual
|
|