Conductivity Meters & Accessories - Page 30

Manufacturer: KDD Brand: KDD

DescriptionRange: 0 to 1000 mg/L.LCD with indicates both mg/L & temp.Data hold function for freezing the desired value.Water proof.Auto powers off after 5 minutes of non-use.Build in temperature sensor, ATC (auto temperature compensation).Microcomputer circuit, intelligent function, high accuracy.Easy to change the TDS electrode.Compact size, light weight.Temperature measurement, ℃, ℉.Power supply by 1.5 V battery (LR44) x 4 PCs (included!)Technical parametersMeasurement Range :Salt 0 to 1000 mg/L.Temp. 0 to 50 ℃ ( 32 to 122 ℉ ).Resolution:Salt 1 mg/L.Temp. 0.1 ℃/ 0.1 ℉.Accuracy:Salt ± 1% FS After calibration.Salt Calibration: 1 points calibration.Dimension 188 x38 mmWeight 82 g NOTE: we will send the product to you as soon as possible If you have any questions , please feel free to contact us

Manufacturer: YSI Brand: YSI

The YSI EC300A portable meter provides conductivity, specific conductance, salinity, TDS, and temperature readings for water quality testing applications, as well as automatic temperature compensation, an LCD screen, and a four-electrode conductivity cell. This meter has automatic temperature compensation (ATC) for accurate readings in fluctuating temperatures, and pushbutton calibration capabilities. Onscreen tutorial messages for calibration and measurement procedures display on a large LCD screen for ease of viewing. The meter's four-electrode conductivity cell is designed for field use. It has a memory function that can store up to 50 data sets and calibration backup that preserves settings when the power is off. The unit operates on a single 9V battery, and turns off automatically after 30 minutes of inactivity to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. The meter's sealed housing is Ingress Protection certified IP67 for protection against dust and short periods of immersion in water. It comes with a 9V battery and instructions.SpecificationsConductivity range (autoranging), accuracy and resolution0 to 499.9μS/cm, accurate to + or - 1% of reading plus 2μS/cm, with resolution of 0.1μS/cm0 to 4,999μS/cm, accurate to + or - 1% of reading plus 5μS/cm, with resolution of 1μS/cm0 to 49.99mS/cm, accurate to + or - 1% of reading plus 0.05mS/cm, with resolution of 0.01mS/cm0 to 200.0mS/cm, accurate to + or - 2.5% of reading plus 0.5mS/cm, with resolution of 0.1mS/cmSalinity range0.0 to 70.0 ppt with resolution to 0.1 pptSalinity accuracy+ or - 0.2% of the full scaleTDS (total dissolved solids) range0.3 to 1.00Temperature range-10 to +90 degrees CTemperature accuracy+ or - 0.2 degrees C or + or - 0.4% of the full scale, whichever is greaterTemperature sensorThermistor, 10 kilohm at 25 degrees CIngress ProtectionIP67Weight272g/0.6lb.Dimensions18.7 x 7.6 x 3.8cm/7.37 x 3 x 1.5 inches (H x W x D)*H is height, the vertical distance from the...

Manufacturer: Thomas Scientific Brand: YSI Model: 005580

This is not a calibration solution but it is a simple probe verification check. Simply immerse your multiparameter probes in the solution and verify the pH, ORP, and conductivity values instantly. Be confident in your data, make the Confidence Solution part of your quality check during or after your study.

Manufacturer: Extech Brand: Extech Model: EC500

Designed and built for a wide range of applications including process and HVAC cooling towers, industrial and commercial boilers, reverse osmosis systems, pools and spas. The ExStik II pH/conductivity meter combines a rugged flat surface pH electrode with an autoranging highly accurate conductivity cell to precisely measure conductivity, TDS, salinity, pH, and temperature. It delivers seven selectable units of measure: pH, µS, mS, ppm, ppt, mg/L, and g/L. It also provides automatic temperature compensation, adjustable conductivity to TDS ratio (0.4 to 1.0), and a 0.5 salinity ratio. The unit features an analog bar graph that indicates trends, internal memory that stores up to 25 data sets, a renew feature that alerts you when the electrode needs replacement, auto power off, and a low battery indicator. It comes complete with protective sensor cap, sample cup with cap, four batteries,

Manufacturer: HM Digital Brand: HM Digital

Product Description: Quick Check Monitor for TDS and Electrical Conductivity. This Quick Check Monitor tests TDS and Conductivity levels. With the push of a button, the QC-1 unit displays a green or red light to indicate good water quality or service required. Includes one sensor and 1/4" quick-connect T-fitting.

Manufacturer: HM Digital Meters Brand: HM Digital Meters

Measures EC, TDS and temperature. It has three different calibration options (KCl, 442TM, NaCl), each with its own non-linear conversion factor, and Automatic Temperature Compensation (ATC) using three temperature coefficients. Measurement Range: 0-9990 uS; 0-8560 ppm (auto ranging).

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: BL983318-0

BL 983318 is a mini controller that has been designed for easy, affordable installation in tight spaces, ideal for simple yet effective process control. Features ATC (Automatic Temperature Compensation) and simple one point calibration performed through the trimmer. The multicolored LED continuously indicates if the controller is in measurement, dosing or alarm mode. Wiring and external device connections are extremely simple to perform through the terminals on the rear of the instrument. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to need. The overtime control system advises users when the relay is active too long, helping to prevent over-dosage. This model is supplied with mounting brackets, transparent cover and instruction manual. Range: 0.00 - 10.00 ppt. Resolution: 0.1 ppt (10 ppm). 0.5 TDS conversion factor. Accuracy at 25 degree C: +/-2 percent F.S. Calibration: manual with CAL trimmer. Temperature compensation: automatic, 5 to 50 degree C (41 - 122 degree F) with Beta =2 percent/degree C. 12Vdc Power supply. Dosing relay: maximum 2A (fuse protected), 250VAC, 30 Vdc. Setpoint: adjustable from 0 to 10 ppt (10000 ppm). Overtime: adjustable, typically from 5 to approx. 30 minutes. Measures 3-3/32" length by 1-57/64" width by 3-11/16" height.

Manufacturer: Gain Express Holdings Ltd Brand: Gain Express Model: M0199720-ORP Color: 6 in 1 TDS Salt Combo Salinity Tester

This 6-in-1 Multi Parameter pentype water quality tester, can measure pH, Conductivity, ORP ,Temperature (°C/°F), TDS and Salinity in one meter. Measured value is accurately shown in the large, easy to read and clear LCD. Features: Microprocessor based for fast and accurate display Digital calibration by one button It floats on water Temp reading is always display to pH or ORP or Conductivity or TDS or Salinity Large LCD (2.5 x 2 cm) Display Temperature simultaneously with pH or Conductivity or TDS or Salinity With Automatic Temperature Compensation Display Maximum/Minimum value and data HOLD Selectable temperature unit °C/°F Battery Low indication Auto power off Automatically identify the parameters during replacement of electrode Made in Taiwan Specifications: Range: *pH: -2~16.00pH *Temperature: 0~90°C *ORP: -1000 ~ 1000mV *Conductivity: 0~2000µS / 2.00~20.00mS *TDS: 0~1300ppm / 1.30~13.00ppt *Salt: 0~1000ppm / 1.00~12.00ppt Power: 4 x AAA size batteries Weight: 135 g (battery included) Dimension: 195 x 40 x 36mm Set includes: 1 x 6-in-1 Combo Pen Meter 4 x 1.5V AAA Batteries installed 1 x pH electrode 1 x ORP Electrode 1 x Conductivity Electrode 1 x Soaking solution 2 x Bottles of pH Calibration Solution (pH4.0 & pH7.0) 1 x Bottle of Conductivity Calibration Solution (1413uS/cm) 2 x extra screw 1 x Allen wrench 1 x Wrist Strap English User Manual Hard Carrying Case

Manufacturer: Oakton Brand: Oakton Model: WD-35425-10

The Oakton 35425-10 Oakton Multiparameter 35-Series PTTestr 35 is a handheld, waterproof, and dustproof pocket meter that measures pH, conductivity, and temperature and floats, if dropped in liquids. A portable pocket meter is commonly used to measure the pH of substance in hydroponics, agriculture, industrial process checks, water treatment, and swimming pools. This meter features ATC for accurate readings in fluctuating temperatures, and push-button calibration capabilities for a wide range of results. It has stainless steel, pin-type conductivity sensors for durability and compatibility with a wide variety of samples. The meter’s waterproof and dustproof housing has IP67-rating for protection against solid objects or liquids. The testr has a long-lasting sensor with Polyvinylidene Fluoride (PVDF)-protected reference junction with polymer gel for longer lifespan. The meter has a large, upright, dual-line LCD screen for ease of viewing, a hold function which freezes readings for recording, and an auto shut-off to extend the life of the batteries. It has a click-lock battery cover for battery access to replace batteries without tools.

Manufacturer: Innovative Sensor Technology Brand: Innovative Sensor Technology Model: 390.00027

Conductivity Sensor Resistivity: 1000 Ohm at 0°C Tolerance: 2 DIN EN 60751 class B Layout: 4 electrodes and Pt-1000 Temperature Sensor T.-Range: -30°C - +150°C Dimension: 17 x 10 x 0.65 mm (LxWxH) Contacts: Pt/Ni-wires, Ø 0.2 mm, 10 mm long Special: 6-leads