pH Testing - Page 112

Manufacturer: Nutraceutical Corporation Brand: Natural Balance Model: 047868007383

Natural Balance AlkaMax provides the body with a blend of ingredients like calcium, magnesium, and potassium bicarbonate for alkaline support that your diet may require in order to properly aid in digestion. Ion. These are the same types of ingredients found.

Manufacturer: Lethan Corporation Brand: Sci-Supply

2 Packages of 100 (200 strips). These broad scale test strips read from 1 to 14 and deliver readings in increments of 1. Body pH is a good indicator of overall health and there is evidence that maintaining a healthy pH will increase longevity. These strips provide accurate measurements for the making of cold and hot process soaps, general purpose pH testing, automotive applications, body saliva and urine testing, foods, cosmetics, detergents, soils (add distilled water), etc. Each pack contains a comparative color chart on the inner flap as shown in the product photos. Simply immerse the end of the strip into the liquid to be tested for half a second and remove. You may also use a dropper to apply the liquid to the test strip. Compare the color of the strip to the color chart to determine pH. General pH information pH 1 - 3: Extremely Acidic pH 4 - 6: Mildly Acidic pH 7: Neutral pH 8 - 11: Mildly Alkaline pH 12 - 14: Strong Alkaline Each strip is @ 2" long and measures @ 0.25" in width.

Manufacturer: Pro-Lab Brand: ProLab Model: RA100

Radon gas is the #1 cause of lung cancer in non-smokers and the following associations recommend you test your home for Radon Gas: American Lung Association, American Cancer Society and American Medical Association. This test kit meets all EPA and individual state requirements, offering you a quick and accurate radon level of your home or office. The kit includes two (2) short-term radon gas detectors that can be used at the same time and location. The two (2) test detectors satisfy real estate transaction requirements. Safe and easy to use. Send it in using the pre-paid postage envelope included in the kit along with the $40 lab analysis fee and you'll have your results back inside a standard work week. The EPA estimates that 1 one of 15 homes nationwide suffers from radon gas (which is colorless and odorless) and 22,000 deaths annually are attributed to radon gas.

Manufacturer: New Brand Mall Brand: New Brand Mall

Steps 1: Turn on pH meter, Clean the electrode in distill water 2: Immerse the electrode in pH 6.86 standard buffer solution 3: Reset with screwdriver, until the display digital is 6.86pH. Then complete pH 6.86 calibration 4: Clean the electrode in distill water and dry it, immerse the electrode in Ph 4.00 standard buffer solution 5: Reset with screwdriver, until the display digital is 4.00pH. Then complete pH 4.00 calibration 6: Clean electrode and dry it, put the meter into PH 9.18 standard buffer solution. Check if reading is correct between 9.17-9.19pH Specifications - Measuring range: 1-14 pH - Resolution: 0.1 PH - Batteries: 4x 1.5V LR44 button cell (AG13) - Adjustment: trimmer potentiometer - Automatic temperature compensation: 0-50°C (32-122°F) - Dimensions: 151mm×33mm×20mm - Weight: 53g Package includes - 1 x pH Meter - 1 x Carrying case - 1 x Adjustment screwdriver - 2 x Calibration packets - 1 x User's manual

Manufacturer: Micro Essential Laboratory Brand: MICRO ESSENTIAL LABORATORY

The Hydrion Water Hardness Test Kit is packed with two rolls of test papers and two specially calibrated color charts. One roll measures between 0-20 grains per gallon / ppm of CaCO3 The second roll measures from 10-50 grains per gallon / ppm .

Manufacturer: Professional Lab Inc Brand: Professional Lab RA100 Radon Gas Test Kit 12 Pack

Professional Radon Test Kit, Safe, Easy To Use, 2 Detectors For Accurate Testing, Lab Results Within 1 Week, Real Estate Transaction Approved, $40.00 Lab Analysis Fee Required For Standard Lab Results. Each kit includes (2) detectors, this listing is for (12) kits for a total of (24) detectors.

Manufacturer: Scientific Equipment of Houston Brand: SEOH

Ozone is a colourless toxic gas. It is irritating to eyes and mucous membranes and can cause respiratory complaints. An ozone content of 180 ¦g/m 3 is considered as critical value above which sensitive persons should avoid stronger physical exertion. The ozone values published by public media like press, radio or TV represent the ozone concentrations in the vicinity of the measuring stations. However, actual ozone values in other locations can considerably deviate from these published values due to meteorological and chemical influences such as wind, solar radiation, exhaust gases from vehicles etc. For this reason a local measurement of ozone concentrations is recommended. Method of application: Place a test stick in the open air, protected from wind. If necessary, fix the test stick with a piece of adhesive tape. After 10 minutes compare the test field with the colour scale on the container.

Manufacturer: LuckyStone Brand: LuckyStone Model: PH-037

Features: 1. Operating Temperature: 0~50℃ 2. Power: 4 x 1.5V Batteries(AG-13 Button Battery) 3. Dimensions:17.5 x 3 x 2.2cm 4. With pen type waterproof design, this PH meter is easy to handle and simple to store 5. A large LCD display is incorporated giving clear and precise results 6. This PH meter can instantly test your liquid for acid or alkaline 7. Accurate results every time, tester is easy to calibrate at home for making adjustments when necessary 8. Deal instrument for aquarium, fishing industry, swimming pool, school, laboratory, food & beverage etc. Package Includes: 1 x Waterproof pH Meter 1 x Manual

Manufacturer: Annic Brand: Annic Color: Red

Specifications Measuring range: 0-14 pH Resolution: 0.01pH Accuracy: 0.05pH Batteries: 4x 1.5V LR44 button cell (AG13) Automatic temperature compensation: 0-50°C (32-122°F) Dimensions: 5.94x1.30x0.79in Weight: 1.87oz Package includes 1 x Annic pH Meter (Red) 4 x 1.5V LR44 button cells 1 x Adjustment screwdriver 2 x Calibration packets 1 x Carrying case 1 x User's manual How to operate 1. Remove the protective cap. 2. First clean the electrode with distilled water, and suck it with filter paper. 3. Turn on pH by ON-OFF switch located on the top of battery case. 4. Immerse the pH meter electrodes in solution up to the immersion level. 5. Stir gently and wait for the reading to stabilize. 6. After use, switch off it, use the distilled water clean the electrode and replace the protective cap.

Manufacturer: LaMotte Brand: LaMotte Model: 5268-H