Flowmeters - Page 58

Manufacturer: DIGITEN Brand: DIGITEN

This LCD controller can monitor water flow rate,total flow,can control quantitative flow.you can re-setting quantitative flow,when flow reach to the number that you set.the controller will send singal to valve,turn off water flow and alarm automatically. Fratures: Easy to install,size is small. Can connect to flow sensor,temperature sensor,solenoid valve.monitor gases,liquid flow.quantitative flow control,total flow alarm. Monitor real-time flow rate. Display temperature of the liquid.need to extra add temp sensor. Control quantitative flow.when flow reach to the presetting flow,system will output signal to solenoid valve(ON/OFF). Monitor total flow,total flow alarm. Password can protect setting value. When flowmeter is working,faucet dynamic display. You can set K constant for various of flowmeters. Specification: Power adapter: input AC100-240V; Output: DC24V Working volt: DC24V¡À8V/1A Flow range:1-60L/min LCD size:3¡±,built-in backlight. Viewing Angle:0-120 degree. Solenoid valves working voltage:DC12V/0.3-0.5A(NC) Controller case size:103x77x35mm,Controller cutout size:98x73mm. Package Includes: 1 x LCD flow display controller 1 x G1" flow sensor 1 x G1" solenoid valve 1 x AC100-240V power adapter 1 x Temperature sensor 1 x Instruction

Manufacturer: COLE-PARMER Brand: Brooks Instrument

Machined from solid acrylic blocks, these meters have integral metering tubes that provide precise readings even in aggressive plant environments. The meters' inlet/outlet ports and mounting studs are extended for easy panel installation. An alternate option is a tripod base (32462-50 sold separately) which allows for mobility from bench to bench. Note: There are many additional types of acrylic flowmeters not listed here. Contact our Application Specialits for quotes on acrylic meters with special requirements. Durable single-piece body withstands severe shock and vibration Ideal for process plant applications on air sampling equipment, gas analyzers and chemical feed systems for water treatment Flexible design allows for panel or bench mounting

Manufacturer: Gems Sensors Brand: Gems Sensors Model: 212465

Gems FT-210 features proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or flow rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life.

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-610/H526-008-NO#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|1 - 10 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 1.0 Specific Gravity Water Media

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-618/H526-008-NO#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|3 - 18 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Water Line, Commercial Buildings, Irrigation and Seal Water, For 1.0 Specific Gravity Water Media

Manufacturer: Neptune Brand: Neptune

Back Flow Meter 5/8 x 3/4 302 Bolt/Bronze BTM Cap

Manufacturer: Cole-Parmer Brand: Cole-Parmer Model: AO-03216-14

All flowmeters come with correlation data sheets for water and air at standard temperature and pressure (stp). we can also supply calibration data for oxygen, nitrogen, hydrogen, Helium, CO2, Argon, other liquids and gases, and for conditions other than stp-call our application specialists for more information. Compact size makes these ideal for tight measuring areas clear polycarbonate front shield magnifies scale 16 percent . A vertical Tangential locator line ensures hairline accuracy in reading Float position. Each flowmeter consists of a heavy-walled glass flow tube mounted in an anodized Aluminum frame with white acrylic back plate (1/8' thick). minimum flow rate is less than one tenth of the maximum flow value in the ordering table. Select a flowmeter with a high-precision Valve for superior flow rate control-ideal for low-flow applications or for any application where you need precise flow control. The 16-turn high-precision Valve features a nonrising stem to more accurately hit your desired set point.

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-728/H526-008#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|4 - 28 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-718/H526-008-NC#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|3 - 18 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media

Manufacturer: Hedland Flow Meters Brand: Hedland Flow Meters

The EZ-View series flow meter is a rugged, low cost direct reading industrial class flow meter that is simple to install. It can be mounted (installed) in any position from vertical to horizontal without costly flow straighteners or other special plumbing. Constructed of high impact polysulfone plastic, the EZ-View product line offers excellent structural integrity and chemical compatibility with a wide range of industrial chemicals.Automatically signals alarm, if flow is too high or too lowModels available for AC or DC power supplyPolysulfone bodies for standard applicationsEasy to installEasy flow limit adjustmentRelatively insensitive to shock and vibrationWithin +/-1% repeatabilityLow cost+/-5% full scale accuracyLength includes end fittingDo not use pipe dopeUse Teflon tape onlyUse with plastic fittings only. Brand Name|Hedland#MFR Part Number|H621-704/H526-008-NC#UNSPSC|41112501#Item|Flow Meter#Type|Variable Area#Series|EZ-View, H621#Connection Size|1 Inch#Flow Rate|0.5 - 4 gpm#Pressure Rating|325 psi#Connection Type|NPTF Male#Maximum Viscosity|4.2 - 108 cSt#Mounting Type|All Position#Temperature Rating|32 - 250 deg F#Dimensions|5-1/4 Inch Length#Material|Polysulfone#Standard/Approvals|ANSI/ASME B1.20.1#Application|Automotive, Power Generation, Pulp and Paper, Municipal, Lube Oil Systems and OEM, For 0.876 Specific Gravity Oil Media