Flowmeters - Page 72

Manufacturer: Flomec Flow Meters Brand: Flomec Flow Meters

Flomec MR 5-30 series 5 - 30 gpm nutating disc mechanical fuel meter made from aluminum rated to 50 psi pressure with 1" NPT connection. Brand Name|Flomec#MFR Part Number|126300-03#UPC|031401000665#UNSPSC|41112501#Item|Mechanical Fuel Meter#Connection Size|1 Inch#Flow Rate|5 - 30 gpm#Pressure Rating|50 psi#Master Totalizer|999999.9 gal#Connection Type|NPT#Display Type|4-Digit Batch, 8-Digit Total#Temperature Rating|-20 to 125 deg F#Dimensions|7 Inch Length x 6-1/4 Inch Width x 5-7/8 Inch Height#Material|Aluminum#Standard/Approvals|UL Listed to US and Canadian Standards

Manufacturer: DWYER Brand: Dwyer

NEW DWYER 1230-36-WM FLEX-TUBE MANOMETER 0-36IN-H2O WATER FLOW METER D537113

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Dwyer® Series WM2 Multi-Jet Water Meter is ideal for commercial and industrial applications. The multi-jet design allows for simplicity and accuracy with wide flow ranges, even in low flow applications. The magnetically driven, hermetically sealed register will not leak or fog and is completely separated from the water. These water meters are designed for long service life and maintenance-free operation, even under harsh conditions. Note: NOT FOR POTABLE WATER USE, BRASS CONTAINS LEAD IN EXCESS OF LOW LEAD LIMITS. (Standard range shown in picture).

Manufacturer: Taosonic

Features: 1. High Accuracy measuring Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1% 2. Wide measuring range Several types transducer for selection, measuring pipe size from DN15mm to DN6000mm 3. Chinese & English menu Different version UFM can support Chinese or English display, easy to operate. 4. High Reliability Adopt low voltage, multi-pulse technology to improve accuracy, useful life and reliability. 5. Strong Anti-interference Dual-balance signal differential receiver/driver circuit to avoid interference of converter,TV tower, high voltage line etc 6. Powerful Recording Function Automatically record the following data: a. The totalizer data of the last 512 days/128 months/10 years b. The time and corresponding flow meter of the last 64 times of power on and off events c. The working status of the last 32 days 7. Power Supply:DC8-36V 8. Input:3 channel 4-20mA analog input 9. Output:Isolation RS-485 output,2 channel isolation OCT output:1 channel isolation 4-20mA output (two-wire system) 10. Communication Protocols:Compatible with METER-BUS,MODBUS,Fuji extended protocol and general water meter protocol. Clamp On Transducer Introduction: 1. TS-2 type: DN15-100mm, -30-90℃ 2. TM-1 type: DN50-700mm, -30-90℃ 3. TL-1 type: DN300-6000mm, -30-90℃ 4. HTS-2 type: DN15-100mm, -30-160℃ 5. HTM-1 type: DN50-700mm, -30-160℃ 6. HTL-1 type: DN300-6000mm, -30-160℃ Insertion Type Transducer Introduction: 1. TC-1: DN＞80mm -30~160℃ 2. TC-2：DN＞80mm -30~160℃ (Lengthen Type) Accessories: Transmitter;TS-2 transducers;Clamp Fixture;Cable

Manufacturer: COLE-PARMER Brand: Cole-Parmer

These sensors are ideal for low-flow applications involving mildly acidic or slightly corrosive gases and liquids. Economically designed, sensors provide a single 0 to 5 VDC output signal. This single signal is ideal for simple, low-cost flow rate measurement or for integration of the sensor into an existing central control system. Ryton PPS sensors are ideal for liquids or air. Sensors for liquids can be used with a wide variety of transparent, low-viscosity liquids under 10 cSt. Sensors measure a wide flow range from as low as 20 mL/min to as high as 500 L/min. The wetted materials are epoxy, glass-filled polyphenylene sulfide (Ryton PPS), glass, stainless steel, sapphire, and Viton. Note: A power supply is required for these flow sensors-order separately. If using an existing power supply, order cable assembly 32704-52. Ryton® PPS materials for use in aggressive and non-aggressive gas or liquid systems A range of available configurations to suit most applications Voltage output to monitor and record flow rates and totals Interface with data acquisition system

Manufacturer: Great Plains Industries Brand: FLOMEC Model: 039-TM150-N

1 ½ in. PVC water meter with NPT fittings and local electronic LCD computer that reads Gallons, Litres and Cubic Feet. Use with water and mild chemicals.

Manufacturer: Generic Brand: Generic Model: STK0110020230

Water flow sensor is mainly consists of plastic valve body, rotor assembly and Hall Current Sensor.It is installed in the hot water inlet end for detecting water flow. When water through the flow rotor assembly, Magnetic rotor will rotate and Speed will change as the flow change. Hall Current sensor output corresponding pulse Signal and feedback to controller, then the controller will control the flow. Can use for Water heaters, credit card machines, water vending machine, flow measurement device. Features: Lght weight, small size, easy to install. Inlaid with stainless steel impeller shaft, durable wearable. Seal Ring with the upper and lower force structure never leaks. Precautions: Non-violent shock, and chemical erosion. Non-throwing or hitting. Mounted vertically, should not exceed 5 degrees inclination. Temperature of Medium should not exceed 120 ℃ Cord Connection: Red: Positive(+) Yellow: Signal output. Black: Negative(-) Specification: The lowest rated working voltage: DC4.5 5V-24V. Maximum operating current: 15 mA (DC 5V). Working voltage range: DC 5~18 v. Load capacity: ≤ 10 mA (DC 5V). Work temperature: ≤ 80 ℃ Work humidity range: 35%~90%RH (no frost) Allowing pressure: pressure 1.75Mpa Storage temperature: -25~+80 ° c Save humidity: 25%～95%RH Flow Range :1-60L / min External threads: 3/4" Package Includes: 1 x 1-60L / min Water flow sensor

Manufacturer: Dwyer Instruments Brand: Dwyer Model: MMA-36

The standard Model MMA flowmeter is suitable for both gas and liquid applications. It can be configured by the user with the parts provided to have non-removable top or bottom from mounted metering valves or no valve at all. The transparent nylon material provides high chemical resistance, low moisture absorption and is transparent to facilitate routine inspection. Using the assembly key provided, the flowmeter can be disassembled anytime for cleaning or reconfiguration. In OEM quantities, ultrasonically welded caps or interchangeable mole cores enable production of the MMA flowmeter with a low profile or flat front surface where no valve is required. The MMA is practically unbreakable, mounts easily, and is easy to read. Two 5/16" OD mounting-connection tubes permit quick push-on connection of rubber or plastic tubing. A bottom clip for "stand up" mounting is also provided. Despite its compactness, the MMA flowmeter features a 2" scales which combined with precision molding, enables highly repeatable readings to be made to within ±4% accuracy. Where a compact flowmeter is required to measure small volume air flows, the Model MMF is recommended. Easy to mount, they require a minimum of panel space. A white back on the flow tube makes the ball float easy to see. The scale is highly visible and easy to read. Scale graduations are printed on aluminum alongside the flow tube (not on it), so the position of ball float is instantly visible.

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Sight flow indicators are a low-cost, durable rotor-style flow indicator. Choose from models that provide basic visual flow indication or models with output for remote flow monitoring. Units are constructed of clear plastic, enabling 360° viewing of the spinning rotor for easy flow indication. Models constructed of polysulfone (PSF) have excellent chemical compatibility, high pressure and temperature ratings, and all wetted materials are FDA compliant/NSF rated for potable water applications. Models that are polycarbonate (PC) are constructed of UV-stabilized material making them ideal for outdoor applications (these models are not FDA compliant/do not have NSF rating). Easily replace or switch outputs - install onto an existing indicator body in the field without any tools. Any sensor can be used with any flow indicator. Easily view flow indicator through clear plastic housing Models with 1 to 10 VDC output offer local and remote indication No magnets in the rotor to attract ferrous materials Output sensors can be added and replaced in the field without removing body from the process line

Manufacturer: Tuthill Brand: Fill-Rite Model: KIT320MA

Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. We use only the most durable materials to insure long life and dependability. Fill-Rite and Sotera branded products deliver superior performance time and time again, regardless of the application or installation.