Viscometers - Page 33

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon ZCAC-RO-5 Zeitfuchs cross-arm viscometer has a permanently attached 51mm diameter round metal holder and a 60 to 300 centistokes (cSt) viscosity measuring range. It is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.3 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAC-RO-series size 5 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measu...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon ZCAC-RO-8 Zeitfuchs cross-arm viscometer has a permanently attached 51mm diameter round metal holder and a 2,000 to 10,000 centistokes (cSt) viscosity measuring range. It is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 10 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAC-RO-series size 8 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity ...

Manufacturer: Thomas Scientific Brand: BYK-Gardner Model: 174

The BYK-Gardner 174 Ford viscosity cup has a 70 to 370 centistokes (cSt) viscosity range and is suitable for testing fluids such as paints and lacquers. The number 4 aluminum flow cup has a stainless steel orifice with a 0.16-inch diameter. Efflux times range from 20 to 105 seconds. It includes an ASTM certificate. This Ford viscosity cup is calibrated against National Institute of Standards and Technology (NIST) for testing standard oils and meets ASTM International D1200 standard for testing viscosity, ASTM D333 standard for testing paints, and ASTM D365 standard for testing nitrocellulose lacquers. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National In...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7560

The CAP Spindle #7 is an accessory for the Cone and Plate Viscometers.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7534

The CAP Spindle #4 is an accessory for the Cone and Plate Viscometers.

Manufacturer: Tathastu Brand: Tathastu

Tathastu Saybolt Viscometer

Manufacturer: GSS Brand: GSS

GSS Saybolt Viscometer

Manufacturer: MG Scientific Brand: MGM

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export Redwood Viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Redwood Viscometer is delivered to the clients in a committed time frame owing to our diligent carriage and freight agents.Features of Redwood Viscometer Machines:- Require Minimum Distortion and are the perfect solution to all the problems.Excellent PerformanceRobust Construction

Manufacturer: Mars International Brand: Mars

Mars International Best Quality Saybolt Viscometer with Best Quality

Manufacturer: Mars International Brand: Mars

Mars International Best Quality Saybolt Viscometer with Best Quality