Viscometers - Page 40

Manufacturer: Cannon Instrument Brand: CANNON Instrument

Similar to Cannon-Ubbelohde but less rugged in design. Includes instruction sheet. Minimum sample volume: 11 mL. Require bath depth of 241 mm (9.5"). See Table 2 (preceding 9721A50) for constants and ranges. Individually boxed. Calibrated viscometers are supplied with a certificate of calibration and instruction sheet. Viscometers have the serial number and size printed on the outside of the box and on the viscometer. Holder is not supplied. For holders, see Thomas number 9726M82.

Manufacturer: YSY10Cyanalab Shop Brand: Cyanalab Shop

CP-24B Lens Drilling & Slotting Machine Grooving Groove Notch-cutting Machine Characteristics: This machine is multi-functional special-purpose equipment for perforating and grooving of rimless frame. It is most applicable to CR lens and PC lens to perforate and groove. Opposing taper drill bits system allows holes to be drilled both side from both sides with simultaneously precise location and avoids chipping and breaking of all lenses, especially those made of glass. After hole drilled, place the lens under reamer and lifted upwards to be enlarged to desired size. The adjustable groove-cutting device can get accurate depth of groove cutting. In addition, this machine has Al pipe and speed controller. It also comes with LED lamp or handle (depending on your own choice). Technical Parameters: Power Supply: AC 220 V/ 50 Hz; AC 110 V/ 60 Hz; 250 W Dimension: 260 x 220 x 350 mm Weight: 3 kg NOTE: we have both 110V version and 220V version for this item, please kindly which one do you need so we can arrange the shipment as soon as possible, thank you! If you do not leave a message to us, we will ship the item as your country's standard voltageHeadling time：4days you will receive it within 5-9 working days.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 176

The BYK-Gardner 176 Ford viscosity cup has a 70 to 370 centistokes (cSt) viscosity range and is suitable for testing fluids such as paints and lacquers. The number 4 aluminum flow cup has a stainless steel orifice with a 0.16-inch diameter. Efflux times range from 20 to 105 seconds. This Ford viscosity cup is calibrated against National Institute of Standards and Technology (NIST) for testing standard oils and meets ASTM International D1200 standard for testing viscosity, ASTM D333 standard for testing paints, and ASTM D365 standard for testing nitrocellulose lacquers. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technolo...

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 7510

The Digital KU-2 Spindle is a replacement for the Digital KU-2 Stormer-Type Viscometer.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUU-50 uncalibrated viscometer has a 0.8 to 4.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.004 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUU-series size 50 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This uncalibrated viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUU-25 uncalibrated viscometer has a 0.5 to 2.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.002 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUU-series size 25 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This uncalibrated viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

For measurement of kinematic viscosity of transparent Newtonian liquids by suspended level principle as described in ASTM D 445 and D 446, and ISO 3104 and 3105. Similar to Cannon-Ubbelohde but less rugged n design. Provided with certificate of calibration and instruction sheet

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Manning CMVC-4 vacuum-calibrated viscometer has a 0.036 to 0.8 poise (P) viscosity measuring range and is suitable for the measurement of highly viscous materials such as asphalt at 140 degrees F. The CMVC-series size 4 viscometer uses a water bath (not included) for temperature-control testing, and a 300mm Hg vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This vacuum-calibrated viscometer meets the ASTM International D2171 standard for testing asphalt viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), International Standards Organization (...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

Technical Specification Item Inverter For Use With Automatic Viscometer This listing is for each.

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument The product usually takes 7--13 business days to arrive to your hand after your order is confirmed . Introduction  It is designed according to ASTM D1200, D333 and D365 standards and widely used to measure the viscosity of paints,inks, lacquers and other liquids.It is made of high quality aluminum with a stainless steel nozzle insert and the capacity is 100ml.  Evaluate the viscosity of the material by measuring the time of a certain amount specimen in the aluminum cup outflows from the stainless steel nozzle in the bottom.  Technical Specification Material: Cup body-aluminum alloy, Nozzle-stainless steel  Volume: 100 ml BEVS 1101/1: 2.1mm(Orifice), 10~35cSt(Viscosity Range),55~100Sec(Flow Time) BEVS 1101/2: 2.8mm(Orifice), 25~120cSt(Viscosity Range),40~100Sec(Flow Time) BEVS 1101/3: 3.4mm(Orifice), 49~220cSt(Viscosity Range),30~100Sec(Flow Time) BEVS 1101/4: 4.1mm(Orifice), 70~370cSt(Viscosity Range),30~100Sec(Flow Time) BEVS 1101/5: 5.8mm(Orifice), 200~1200cSt(Viscosity Range),30~100Sec(Flow Time) Friendly Reminder We will try our best to provide you the best product and service, welcome to buy our product. Please contact us if you have any question,and we will reply it as soon as possible.