|
|
-
3.8 of 5.0 with 23 Reviews
SALE PRICE: $187.77 27% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon-Ubbelohde CUC-450 calibrated viscometer has a 500 to 2,500 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 2.5 centistokes per second (cSt/s) for calculating kinematic viscosity. The CUC-series size 450 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This viscometer is suited for use at temperatures above 93 degrees C (200 degrees F) or below -18 degrees C (0 degrees F) and meets the ASTM International D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, proces...
-
3.8 of 5.0 with 24 Reviews
SALE PRICE: $206.59 22% OFF
Manufacturer: CANNON INSTRUMENT CO.
Brand: CANNON Instrument
Model: 9721-K65
Manufacturer: CANNON INSTRUMENT CO.
Brand: CANNON Instrument
Model: 9721-K65
|
The Cannon-Ubbelohde 9721-K65 suspended-level viscometer has a 20 to 100 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.1 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 11mL. The CUC-series size 200 viscometer uses a 254mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated suspended-level viscometer meets the ASTM International D446 standard for suspended-level viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development,...
-
3.8 of 5.0 with 35 Reviews
SALE PRICE: $215.00 1% OFF
Manufacturer: YSY
Brand: ANDY
Manufacturer: YSY
Brand: ANDY
CP-7B-35W Single Wheel Optical Lens Hand Edger Manual Lens Grinder AC Motor Characteristics: *Single Wheel; Single holder; AC Motor *35W type grinding wheel: Width 35 mm, right rough grinding 16 mm, left fine grinding 19 mm Technical Parameters: Power Supply: AC 220 V/ 50 Hz; AC 110 V/ 60 Hz; 10 W Dimension: 350 x 220 x 210 mm Weight: 5.0 kg Headling time:4days you will receive it within 5-9 working days.
-
3.8 of 5.0 with 41 Reviews
SALE PRICE: $225.33 15% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon-Ubbelohde CUSMC-500 calibrated capillary-style viscometer has a 1,600 to 8,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 8.0 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The CUSMC-series size 500 viscometer uses a 240mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and developm...
-
3.8 of 5.0 with 23 Reviews
SALE PRICE: $227.58 15% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon ZCAC-1 Zeitfuchs cross-arm viscometer has a 0.6 to 3.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.003 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAC-series size 1 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, pro...
-
3.8 of 5.0 with 38 Reviews
SALE PRICE: $232.76 13% OFF
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
Manufacturer: Cannon Instrument
Brand: CANNON Instrument
|
The Cannon BS/IP/SL-5 suspended-level viscometer has a 20,000 to 100,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 100 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 11mL. The BS/IP/SL-series size 5 viscometer uses a 250mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This suspended-level viscometer meets the ASTM International D446 standard for suspended-level viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscome...
-
3.8 of 5.0 with 16 Reviews
SALE PRICE: $237.00
Manufacturer: COLE-PARMER
Brand: Gilmont
Manufacturer: COLE-PARMER
Brand: Gilmont
This viscometer is extremely easy to use; first fill the tube with sample, then invert tube. Next, restore tube to nornal position, turn the knob to release the ball, and then simply measure the time of descent. The ball moves against a white background with red reference lines making it easy to read. Repeatability with good technique varies from 0.2 to 1.0%, depending upon time of descent. Viscometers require a 7-mL sample volume. Viscometers have wetted materials of glass, Viton®, and Delrin® acetal. PTFE O-rings are available for use with lquids that adhere to Viton®; call our Applications Specialists for more information. Ideal for routine plant quality control checks and research laboratory applications
-
3.8 of 5.0 with 17 Reviews
SALE PRICE: $244.47 13% OFF
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0641
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0641
|
The BYK-Gardner 0641 replacement bubble viscometer standard tube has a viscosity of approximately 665.9 centistokes (cSt), and is suitable for testing fluids such as resins and varnishes. The 9mL capacity sealed bubble tube standard is lettered U and has a bubble test time of approximately 6.79 seconds. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tube has a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer standard tube is ASTM International certified and meets the ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufa...
-
3.8 of 5.0 with 44 Reviews
SALE PRICE: $244.47 13% OFF
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0629
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0629
|
The BYK-Gardner 0629 replacement bubble viscometer standard tube has a viscosity of approximately 517.7 centistokes (cSt), and is suitable for testing fluids such as resins and varnishes. The 9mL capacity sealed bubble tube standard is lettered S and has a bubble test time of approximately 5.29 seconds. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tube has a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer standard tube is ASTM International certified and meets the ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufa...
-
3.8 of 5.0 with 38 Reviews
SALE PRICE: $244.47 13% OFF
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0618
Manufacturer: BYK-Gardner USA
Brand: BYK-Gardner
Model: 0618
|
The BYK-Gardner 618 replacement bubble viscometer standard tube has a viscosity of approximately 210.8 centistokes (cSt), and is suitable for testing fluids such as resins and varnishes. The 9mL capacity sealed bubble tube standard is lettered H and has a bubble test time of approximately 2.15 seconds. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. The sealed standard tube has a 15-year shelf life and can be National Institute of Standards and Technology (NIST) recertified. This bubble viscometer standard tube is ASTM International certified and meets the ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufac...
|
|