Viscometers - Page 60

Manufacturer: COLE-PARMER Brand: Cole-Parmer

Take viscosity measurements of very thin paints, inks, solvents, adhesives, and coating materials of all kinds. Simply fill the cup by immersing it in the test liquid. After withdrawing the cup, measure the time it takes until the first break in the liquid stream. Each cup is supplied with a conversion table to determine viscosity in centistokes (cSt) from the elapsed time. Dip cups have an anodized aluminum handle for easy dipping and holding during timing. Replaceable orifice snaps in quickly and easily - no need to replace the whole cup. Mini Ford Dip Viscosity Cups have half the capacity as the standard cupsperfect for smaller samples. Tolerance is 4%. Feature handle for easy sample dipping - great for field testing Compatible with ASTM D 1200

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon ZCAC-8 Zeitfuchs cross-arm viscometer has a 2,000 to 10,000 centistokes (cSt) viscosity measuring range and is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 10 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAC-series size 8 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, p...

Manufacturer: Thomas Scientific Brand: BYK-Gardner Model: 575

The BYK-Gardner 575 replacement empty bubble viscometer sample tube has a 9mL capacity and is suitable for testing fluids such as resins and varnishes. It has printed marks at 27, 100, and 108mm from the bottom of the tube for timed tests. The grade N tube includes a cork stopper for sealing a sample. Sample fluid viscosity is determined by comparing bubble rise time to those of bubble tube standards and choosing the closest match. This bubble viscometer sample tube meets the ASTM International D1545 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), International Standards Org...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon BS/IP/MSL-1 miniature suspended-level viscometer has a 0.6 to 3.0 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.003 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 4mL. The BS/IP/MSL-series size 1 viscometer uses a 305mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated miniature suspended-level viscometer meets the ASTM International D446 standard for suspended-level viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, resear...

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument The product usually takes 7--13 business days to arrive to your hand after your order is confirmed . Introduction  BEVS NF Cup is designed according to French NFT30-070 standard and it is widely used by European company and French company especially. Technical Specification Volume: 108±1 ml Material: Cup body-aluminum alloy ,Aperture-stainless steel Flow Time: 30-300 secs. BEVS 1118/2.5: 2.5mm(Orifice), 5~140cSt(Viscosity Range) BEVS 1118/4: 4mm(Orifice), 50~1100cSt(Viscosity Range) BEVS 1118/6: 6mm(Orifice),510~5100cSt(Viscosity Range) BEVS 1118/8: 8mm(Orifice), 700~11500cSt(Viscosity Range) Friendly Reminder We will try our best to provide you the best product and service, welcome to buy our product. Please contact us if you have any question,and we will reply it as soon as possible.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0663

BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. The time required for an air buble to rise is directly proportional to the viscosity of the liquid - the faster the bubble rises, the lower the viscosity. BYK-Gardner bubble viscometers come in lettered tubes A5 through Z10 in four different tube sets covering viscosity ranges from 0.05 to 1,000 stokes.

Manufacturer: MG Scientific Brand: MGM

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export Redwood Viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Redwood Viscometer is delivered to the clients in a committed time frame owing to our diligent carriage and freight agents.Features of Redwood Viscometer Machines:- Require Minimum Distortion and are the perfect solution to all the problems. Excellent Performance Robust Construction

Manufacturer: MG Scientific Brand: MGM

We manufacture, supply and export Redwood Viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Redwood Viscometer is delivered to the clients in a committed time frame owing to our diligent carriage and freight agents.Features of Redwood Viscometer Machines:- Require Minimum Distortion and are the perfect solution to all the problems.Excellent PerformanceRobust Construction

Manufacturer: GSS Brand: GSS

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export redwood viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. .Features of redwood viscometer machines:- Require minimum distortion and are the perfect solution to all the problems.Excellent performanceRobust construction

Manufacturer: GSS Brand: GSS

Owing to the monumental demand of our prestigious clients, we manufacture, supply and export redwood viscometer. These products are used in different laboratories for measuring the viscosity of varied kinds of fluids. Owing to their longer service life, less maintenance and corrosion resistance surface, these products have gained a huge demand among our clients in the global arena. Features of redwood viscometer machines:- Require minimum distortion and are the perfect solution to all the problems. Excellent performance Robust construction