Viscometers - Page 63

Manufacturer: Cannon Instrument Brand: CANNON Instrument

For measurement of kinematic viscosity of transparent Newtonian liquids by suspended level principle as described in ASTM D 445 and D 446, and ISO 3104 and 3105. Similar to Cannon-Ubbelohde but less rugged n design. Provided with certificate of calibration and instruction sheet

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument The product usually takes 7--13 business days to arrive to your hand after your order is confirmed . Introduction  BEVS 1107 Zahn Cup is designed according to the standard of ASTM D4212-93. Zahn Cup, it can be used to measure the viscosity of Newtonian or near-Newtonian liquids.Adjustable in anywhere such as the workshop, factory and lab etc. And quickly measure the viscosity of liquids. This Flow Cup is widely used in ink and printing industry.  Technical Specification Material：Stainless steel Size: 44 ml BEVS 1107/1: 1.92mm(Orifice), 5 - 60 cSt(Viscosity Range), 35-80Sec(Flow Time) BEVS 1107/2: 2.70mm(Orifice), 20 -250cSt(Viscosity Range), 20-80Sec(Flow Time) BEVS 1107/3: 3.85mm(Orifice),100 -800cSt(Viscosity Range), 20-80Sec(Flow Time), BEVS 1107/4: 4.40mm(Orifice),200 -1200cSt(Viscosity Range), 20-80Sec(Flow Time), BEVS 1107/5: 5.40mm(Orifice), 400 -1800cSt(Viscosity Range), 20-80Sec(Flow Time) Friendly Reminder We will try our best to provide you the best product and service, welcome to buy our product. Please contact us if you have any question,and we will reply it as soon as possible.

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon AIVC-400 vacuum-calibrated graduated capillary-style viscometer has a 9,600 to 140,000 poise (P) viscosity measuring range and is suitable for the measurement of highly viscous materials such as asphalt at 140 degrees F. The AIVC-series size 400 viscometer uses a 180mm depth water bath (not included) for temperature-control testing, and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This vacuum-calibrated viscometer meets the ASTM International D2171 standard for testing asphalt viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), Internati...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon AIVC-25 vacuum-calibrated graduated capillary-style viscometer has a 42 to 800 poise (P) viscosity measuring range and is suitable for the measurement of highly viscous materials such as asphalt at 140 degrees F. The AIVC-series size 25 viscometer uses a 180mm depth water bath (not included) for temperature-control testing, and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. This vacuum-calibrated viscometer meets the ASTM International D2171 standard for testing asphalt viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, process control, and plant quality control applications. Some viscometers are manufactured to meet industry or governmental standards, including Ingress Protection (IP), National Institute of Standards and Technology (NIST), International Stan...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon-Ubbelohde CUSMC-100 calibrated capillary-style viscometer has a 3.0 to 15 centistokes (cSt) viscosity measuring range and is suitable for the measurement of transparent Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.015 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The CUSMC-series size 100 viscometer uses a 240mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development...

Manufacturer: Cannon Instrument Brand: CANNON Instrument

The Cannon ZCAC-5 Zeitfuchs cross-arm viscometer has a 60 to 300 centistokes (cSt) viscosity measuring range and is suitable for the measurement of either transparent or opaque Newtonian fluids such as fuels and lubricants. It uses a viscometer constant of 0.3 centistokes per second (cSt/s) for calculating kinematic viscosity of sample sizes as small as 1.0mL. The ZCAC-series size 5 viscometer uses a 230mm depth water bath (not included) for temperature-control testing and a vacuum (not included) to draw a sample up for timed testing between two sets of printed marks. It includes an ASTM International certificate of calibration. This calibrated capillary-style viscometer meets the ASTM International D446 standard for viscometers and the D445 standard for testing viscosity. A viscometer, also called a viscosimeter, is an instrument used to measure the friction caused by the relative motion of a Newtonian fluid and a known surface, and is usually expressed in units of poise (P), centipoise (cP), pascal seconds (Pa s), and millipascal seconds (mPa s). Viscometers have several forms, including but not limited to falling ball, rotational, vibrating, capillary, funnel, and bubble. A falling ball viscometer measures the time it takes for a ball of known diameter and density to fall through fluid in a cylinder of known diameter. A rotational viscometer measures the force required to stir a fluid. A vibrating viscometer measures the power input necessary to keep the oscillator vibrating at constant amplitude while immersed in a fluid. A capillary viscometer has a narrow-bore vertical section with two printed marks that measure time required for a known volume of fluid to fall a known distance. A funnel viscometer, such as a Ford, Zahn, or Shell cup, measures the time it takes a known volume of fluid to flow from the base of a cone through a short tube. A bubble viscometer measures the time required for an air bubble to rise through a fluid. Viscosity measurements are used in laboratories, research and development, proces...

Manufacturer: Fungilab, Inc Brand: Fungilab Model: V20026N

Fungi lab V20026N Temperature Probe for LCP and LCP/B f/ SMART with Temperature, EXPERT and PREMIUM

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument

Huanyu Instrument The product usually takes 7--13 business days to arrive to your hand after your order is confirmed . Introduction  BEVS NF Cup is designed according to French NFT30-070 standard and it is widely used by European company and French company especially. Technical Specification Volume: 108±1 ml Material: Cup body-aluminum alloy ,Aperture-stainless steel Flow Time: 30-300 secs. BEVS 1118/2.5: 2.5mm(Orifice), 5~140cSt(Viscosity Range) BEVS 1118/4: 4mm(Orifice), 50~1100cSt(Viscosity Range) BEVS 1118/6: 6mm(Orifice),510~5100cSt(Viscosity Range) BEVS 1118/8: 8mm(Orifice), 700~11500cSt(Viscosity Range) Friendly Reminder We will try our best to provide you the best product and service, welcome to buy our product. Please contact us if you have any question,and we will reply it as soon as possible.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0651

BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. The time required for an air buble to rise is directly proportional to the viscosity of the liquid - the faster the bubble rises, the lower the viscosity. BYK-Gardner bubble viscometers come in lettered tubes A5 through Z10 in four different tube sets covering viscosity ranges from 0.05 to 1,000 stokes.

Manufacturer: BYK-Gardner USA Brand: BYK-Gardner Model: 0662

BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. The time required for an air buble to rise is directly proportional to the viscosity of the liquid - the faster the bubble rises, the lower the viscosity. BYK-Gardner bubble viscometers come in lettered tubes A5 through Z10 in four different tube sets covering viscosity ranges from 0.05 to 1,000 stokes.