Multiparameter Meters - Page 30

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, Pulse, LED, W96xH48mm, 5-Digit, 13 Modes, Indicator, PV (4-20mA) transmission output, 100-240 VAC

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, Pulse, LED, W96xH48mm, 5-Digit, 13 Modes, 5 PNP Outputs/BCD Output, 100-240 VAC

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: 1196C82EA

4-Ring interchangeable probe with built-in temperature sensor, ATC, for use with portable EC/TDS/NaCl/degree C meter with PC connectivity. The potentiometric method eliminates polarization and thus is the most accurate way to measure electrical conductivity in liquids. The probe can also measure in a wider conductivity range because it does not suffer from electrolysis. The probes are ideal for high temperature applications, are easier to clean and provide more stable readings. 1.5m cable.

Manufacturer: FLUKE Brand: Fluke

FLUKE MULTIMETER, TRMS

Manufacturer: YSI Brand: YSI

YSI manufactures instruments, sensors, and software for environmental water quality monitoring and testing. The company, founded in 1948, is headquartered in Yellow Springs, OH.

Manufacturer: Thomas Scientific Brand: YSI Model: 626945

The YSI ProDSS (digital sampling system) is a portable water quality multiparameter instrument for the measurement of several critical parameters - dissolved oxygen (optical), turbidity, pH, ORP, conductivity, specific conductance, salinity, TDS, resistivity, TSS, ammonium, ammonia, chloride, nitrate, depth, temperature and GPS coordinates. Designed for use in applications such as surface water, groundwater, coastal/estuarine, and aquaculture the rugged and reliable ProDSS allows for the measurement of water quality parameters with digital sensors. The ProDSS uses smart, user-replaceable sensor technology that can be connected in any port and automatically recognized by the handheld while retaining the calibration data.

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, Pulse, LED W72XH36mm, 5 Digit, 13 Modes, 5 PNP Open Collector Output, 100- 240 VAC

Manufacturer: YSI Brand: YSI Model: 556-01

Featuring a waterproof IP-67, impact-resistant case, the YSI 556MPS simultaneously measures dissolved oxygen, pH, conductivity, temperature, and ORP. The YSI 556MPS conforms to GLP standards. Battery Options: The unit is powered by alkaline batteries or an optional rechargeable battery pack with fast charge feature. Quickly check pH, ORP, and conductivity values to guarantee probe accuracy during important field studies. Communications: RS-232 Serial. Connector: MS (military spec) waterproof with bayonet lock. Logging: 49,000 data sets, date and time stamp, manual or logging, with user-selectable intervals. Power: 4 alkaline C-cells. Dissolved Oxygen (percent): Polarographic sensor, 0 to 500 percent air saturation range, 0 to 200 percent air saturation, +/- 2 percent of the reading or +/- 2 percent air saturation, whichever is greater; 200 to 500 percent air saturation, +/- 6 percent of the reading accuracy, 0.1 percent air saturation resolution. Dissolved Oxygen (mg/L): Polarographic sensor, 0 to 50 mg/L range, 0 to 20 mg/L, +/- 0.2 mg/L or +/- 2 percent of reading, whichever is greater; 20 to 50 mg/L, +/- 6 percent of the reading accuracy, 0.01 mg/L resolution. Temperature: Thermistor sensor, -5 to 45 degree C range, +/-0.15 degree C accuracy, 0.1 degree C resolution. Conductivity: Four electrode cell sensor, 0 to 200 mS/cm (auto range) range, +/-0.5 percent of reading or 0.001 mS/cm, whichever is greater (4-m cable) +/-1 percent of reading or 0.001 mS/cm, whichever is greater (20-m cable) accuracy, 0.001 mS/cm to 0.1 mS/cm (range dependent) resolution. Salinity: Calculated from conductivity and temperature sensor, 0 to 70 ppt range, +/-1.0 percent of reading or 0.1 ppt, whichever is greater accuracy, 0.01 ppt resolution. Total Dissolved Solids (TDS): Calculated from conductivity and temperature sensor, 0 too 100 g/L range, 4 digits resolution. Measures 9" length by 4-11/16" width.

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI98143-04

It is designed to accept signals directly from a pH electrode and a conductivity probe at the same time. Direct connection of the probes to the transmitter assure a positive electrical connection with no signal loss. This transmitter is ideal for remote process control applications. The output signals are proportional to the input signals but independent of changes in load or cable capacitance. Compensation for the effects of temperature for EC measurements are performed by the transmitters' Automatic Temperature Compensation circuitry. The transmitter can be connected to any pH or conductivity controller, recorder, PC or any data monitoring device that accepts 0 to 4 V input. It is an ideal tool for applications that require the monitoring of both pH and conductivity at the same time. 0-4 V isolated output. 0 to 14 pH and 0 to 10 mS/cm EC range. +/-0.5 percent FS pH and +/-2 percent FS EC accuracy. 2 point, manual pH calibration through offset and slope trimmers and 2 point, manual EC calibration through 0 and 5 mS/cm trimmers. 12-24 VDC power supply. Temperature compensation (EC): automatic, 0 to 60 degree C (32 to 132 degree F) with beta=2 percent/degree C. pH electrode: HI 1001 pH electrode (suggested, not included), HI 1283 matching pin (not included). EC probe: HI 3001 (not included) with cell constant 2.1. Casing: IP 54. Environment: 0 to 50 degree C (32 to 122 degree F); RH maximum 95 percent non-condensing. Measures: 6-19/64" length by 4-3/32" width by 1-3/16" height. Weight: 280 grams.

Manufacturer: Mettler Toledo Brand: Mettler Toledo Model: 51302914

FiveEasy Plus pH, coming with the 3 point calibration, up to 99 data storage and RS232 interface, it is ideal for anyone who needs an economic and reliable solution for easy pH measurement. This instrument is suitable for a wide range of applications in various areas, such as the food and beverage industry, as well as water and environmental analysis. FiveEasy Plus makes pH measurement a pleasure!