Multiparameter Meters - Page 24

Manufacturer: Velleman Brand: Velleman Model: LAB1U

Your space saving lab solution!. A 3-in-1 bench top unit perfect for electronic diagnosing and repair. contents: 1 multimeter, 1 power supply & 1 soldering iron this unit covers 99% of your home lab needs perfect solution for starters or schools

Manufacturer: Gain Express Holdings Ltd Brand: Gain Express Model: M0199720-ORP Color: 6 in 1 TDS Salt Combo Salinity Tester

This 6-in-1 Multi Parameter pentype water quality tester, can measure pH, Conductivity, ORP ,Temperature (°C/°F), TDS and Salinity in one meter. Measured value is accurately shown in the large, easy to read and clear LCD. Features: Microprocessor based for fast and accurate display Digital calibration by one button It floats on water Temp reading is always display to pH or ORP or Conductivity or TDS or Salinity Large LCD (2.5 x 2 cm) Display Temperature simultaneously with pH or Conductivity or TDS or Salinity With Automatic Temperature Compensation Display Maximum/Minimum value and data HOLD Selectable temperature unit °C/°F Battery Low indication Auto power off Automatically identify the parameters during replacement of electrode Made in Taiwan Specifications: Range: *pH: -2~16.00pH *Temperature: 0~90°C *ORP: -1000 ~ 1000mV *Conductivity: 0~2000µS / 2.00~20.00mS *TDS: 0~1300ppm / 1.30~13.00ppt *Salt: 0~1000ppm / 1.00~12.00ppt Power: 4 x AAA size batteries Weight: 135 g (battery included) Dimension: 195 x 40 x 36mm Set includes: 1 x 6-in-1 Combo Pen Meter 4 x 1.5V AAA Batteries installed 1 x pH electrode 1 x ORP Electrode 1 x Conductivity Electrode 1 x Soaking solution 2 x Bottles of pH Calibration Solution (pH4.0 & pH7.0) 1 x Bottle of Conductivity Calibration Solution (1413uS/cm) 2 x extra screw 1 x Allen wrench 1 x Wrist Strap English User Manual Hard Carrying Case

Manufacturer: Oakton Brand: Oakton Model: WD-35425-10

The Oakton 35425-10 Oakton Multiparameter 35-Series PTTestr 35 is a handheld, waterproof, and dustproof pocket meter that measures pH, conductivity, and temperature and floats, if dropped in liquids. A portable pocket meter is commonly used to measure the pH of substance in hydroponics, agriculture, industrial process checks, water treatment, and swimming pools. This meter features ATC for accurate readings in fluctuating temperatures, and push-button calibration capabilities for a wide range of results. It has stainless steel, pin-type conductivity sensors for durability and compatibility with a wide variety of samples. The meter’s waterproof and dustproof housing has IP67-rating for protection against solid objects or liquids. The testr has a long-lasting sensor with Polyvinylidene Fluoride (PVDF)-protected reference junction with polymer gel for longer lifespan. The meter has a large, upright, dual-line LCD screen for ease of viewing, a hold function which freezes readings for recording, and an auto shut-off to extend the life of the batteries. It has a click-lock battery cover for battery access to replace batteries without tools.

Manufacturer: Extech Instruments Brand: Extech Model: CL200

Measures total chlorine quickly, economically and accurately in a wide variety of water samples. It detects free chlorine, hypochlorite and chlorine bound to nitrogenous compounds. Ideal for the measurement of chlorine in drinking, cooking, industrial and domestic wastewater treatment. The chlorine meter is also very useful in any processes that use chlorine as a biocide and sanitation agent such as industrial process water, spas, pools and food processing. The measurement is unaffected by color and suspended solids. Its extreme sensitivity and E.P.A. approved methodology allows the product to be used for compliance reporting. What's Included: meter, electrode, reagent tablets (50 tests), sensor cap, sample cup, batteries, and neckstrap Measures total chlorine from 0.01 ppm and is unaffected by sample color or turbidity Unaffected by sample color or turbidity Simultaneous display of ppm and temperature Automatic electronic self calibration Memory stores and recalls 15 readings and saves last calibrated value Data validation indicators show user the reading is stabilized Large 3-1/2 digit (2000 count) digital display with bargraph Data hold, auto shut-off and low battery indication Waterproof design floats and protects meter in wet environment

Manufacturer: Industrial Test Systems, Inc. Brand: Exact Model: 486101-PW-K

The exciting new eXact iDip Smart Photometer System is the first and only handheld photometer to provide 2–way communication with a Bluetooth SMART (4.0) ready Apple or Android smartphone/tablet (patent pending) with the capacity to the most commonly tested water quality parameters. Data is seamlessly transferred between the two devices when paired with the eXact iDip smart photometer using Bluetooth SMART wireless technology that syncs and transmits test results in real time. The eXact iDip photometer is waterproof (IP-67) and incorporates a permanent built-in sample cell which eliminates loose parts, streamlines the test procedure and improves accuracy. The multilingual eXact iDip app is the brain of the system which allows for instantaneous software updates/upgrades, test customization, and mobile sharing of results via email as a CSV file! It comes with 4 tests installed including pH, Free Chlorine, Combined Chlorine and Total Alkalinity. Over 35 additional parameters are available for in app purchase, making the eXact iDipa truly customized experience. Combined with the built in smartphone/tablet GPS function all results include time, date, and location to enhance test integrity. Water technicians appreciate eliminating repetitive data entry tasks while saving time and money. The eXact iDip uses a patented iDip 4–step reagent delivery method, a quick yet safe and easy procedure for water analysis. Select your test then push a button and dip an eXact strip into the 4 ml water sample for 20 seconds using a gentle back and forth motion. Discard the strip and read your results! The iDip methodology uses fewer steps which minimizes error. eXact Strips provide smooth, precise reagent–dispersion into samples without residual suspended solids that can adversely affect results, especially when testing cold water.

Manufacturer: Milwaukee Instruments Brand: Milwaukee

The Milwaukee BEM802 is a portable pH, electro-conductivity (EC), and total dissolved solids (TDS) meter with Automatic Temperature Compensation (ATC), manual one-point calibration using dials, a single-line LCD screen, a combined pH, EC, TDS and temperature probe, a mounting kit, and a probe holder. A pH/EC/TDS/temperature monitor is used by researchers and hobbyists to measure nutrient parameters and substance conductivity in hydroponics, greenhouses, horticulture, water-testing, and scientific applications. The single-line LCD screen displays the current measurement. This meter has manual two-point calibration through dials on the front panel. The meter comes with the MA850 combination, amplified, double-junction, gel pH electrode with incorporated EC/TDS probe and built-in temperature sensor and 1m (3.3') cable. The meter uses a 9V battery (included) for approximately 150 hours of continuous use and an auto power-off feature turns the meter off after eight minutes of inactivity to extend battery life. The meter has a factory-installed 110V to 9V power converter. The BEM802 also comes with a mounting kit, probe holder, calibration sachets, and instructions. SpecificationspH range0.00 to 14.00 EC range0.00 to 6.0mS/cmTDS range0 to 4000ppmpH resolution.01EC resolution0.01mS/cmTDS resolution10ppmpH accuracy at 20 degrees C+ or - 0.20EC/TDS accuracy at 20 degrees C+ or – 2 percent full scale (F.S.)ATC range0 to 50 degrees COperating temperature0 to 50 degrees C (32 to 122 degrees F)Operating relative humidity95 percentDimensions185 x 82 x 45mm/7.3 x 3.2 x 1.7 inches (H x W x D) Meter weight165g/5.8oz. (with battery) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some tester...

Manufacturer: Reed Brand: Reed Instruments Model: LM-8000

This compact 6-in-1 environmental meter measures air velocity, air temperature, ambient temperature, relative humidity, light and contact temperature. The LM-8000 features Data Hold, Minimum/Max functions and has been designed for one handed operation.

Manufacturer: COLE-PARMER Brand: Oakton Model: AO-35425-10

Great for water, wastewater, laboratory or plant use, these multiparameter testrs feature long-life pH electrodes with a wide range of sample compatibility. Pin-style conductivity sensors feature stainless steel electrodes for chemical resistance and durability. Replaceable sensor module saves you money by reusing the meter body. Advanced features include auto-shutoff, user-adjustable temperature coefficient, self-adjusting TDS and salinity factor, and low-battery indicator. The ultimate Tester for pH, conductivity, TDS, salinity and temperature! combine measurement capabilities of three testers in one convenient pocket-sized unit. Up to 5 point pH calibration with NIST or USA autobuffer recognition. Conductivity, TDS, and salinity feature Autoranging based on the concentration of your sample. IP67 - rated housing Floats If accidentally dropped in water.

Manufacturer: Extech Brand: Extech Model: EC510

' pH/Conductivity Kit, Application Measures pH, Conductivity, Tds, Salinity, And Temperature, Features Flat Surface Ph Electrode, Waterproof, Contains All The Necessary Accessories, Includes Conductivity Calibration Standards, Ph Calibration Buffers, Weighted Base, Saple Cups With Caps, Four Cr2032 Batteries, Neckstrap, Heavy Duty Case, And Instructions, Manufacturers Warranty Length 1 Year Meter, 6 Months Electrodes '

Manufacturer: Amprobe Brand: Amprobe Model: AM-240

The Amprobe AM-240 Autoranging Multimeter with Temperature Sensor has autoranging and manual controls for measuring temperature, current, voltage, capacitance, resistance, duty cycle, and frequency in HVAC and industrial electrical testing applications. The meter measures AC/DC current to 10 amps, AC/DC voltage to 600V, capacitance to 4,000 microfarads, resistance to 40 megaohms, duty cycle from 0.1 to 99.9 percent at frequencies lower than 10 kHz, and frequency to 10 MHz. A K-type thermocouple probe with banana plug measures temperature from -58 to 1,382 degrees F (-50 to 700 degrees C) with a resolution of one degree. The dual-display LCD screen shows current and voltage. Included test leads measure circuit voltage, capacitance, resistance, frequency, and duty cycle, and test for continuity and proper functioning of circuit diodes. The microamps measurement feature has a 0.1 microamp resolution at the 400 microamp range, and a 1 microamp resolution at the 4,000 microamp range for identifying small current changes. The maximum reading mode displays the highest measurement in a session, and an audible continuity buzzer confirms that a circuit is capable of conducting current. The data hold function keeps the desired reading on the display after disconnecting the probe. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, an auto power-off mode turns off the unit after 30 seconds of non-use to conserve battery life and can be disabled, and a low-battery indicator signals when the meter's batteries need to be replaced. A tilt stand holds the meter at an angle for reading. This average sensing, or average responding, meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform, such as standard induction motors and incandescent lights. The meter has a 4,000-count resolution, meaning that it can display up to 4,000 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnic...