|
|
-
3.5 of 5.0 with 19 Reviews
SALE PRICE: $175.00 33% OFF
Manufacturer: YSI
Brand: YSI
Manufacturer: YSI
Brand: YSI
The 60510 ISE (pH, ORP, pH/ORP, ammonium, nitrate, chloride) cable's in lengths of 1 meters. Cables over 1-meter also come with the 603062 cable management kit. The ISE cables ONLY work with the YSI Pro Plus handheld. Any of the ISE sensors can be connected to this cable at any time.
-
3.5 of 5.0 with 45 Reviews
SALE PRICE: $189.95
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, DC Amps, LED display, W96xH48mm, 4 digit, 0-5A Input, 3 Relay Outputs + 4-20mA Output, 100-240 VAC
-
3.5 of 5.0 with 28 Reviews
SALE PRICE: $193.00
Manufacturer: QUANTROL INC.
Brand: Myron L
Model: 575445
Manufacturer: QUANTROL INC.
Brand: Myron L
Model: 575445
These waterproof pH and ORP testers offer anodized aircraft aluminum with protective coating and fully encapsulated electronics for durability. The LCD provides measurement reading with temperature available in both a live and hold measurement mode. Calibration features three point automatic buffer recognition for pH 4, 7, and 10 buffers. What's included: Tester holster, lanyard, and 1.5V n alkaline battery. Waterproof, pocket-sized meters for water analysis testing up to 3 point calibration with 4, 7 and 10 buffer automatic temperature compensation PTBT2 0575445 with Bluetooth for data transfer.
-
3.5 of 5.0 with 11 Reviews
SALE PRICE: $200.00
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
|
Aqua Dip EC/TDS provides simple and fast EC/TDS/Temperature measurements in places with high relative humidity. Aqua Dip EC/TDS allows immediate and precise response with only two operation buttons. This rugged unit is tough and built to last. The probe is even durable enough to be used as a stirrer. The HOLD button will freeze the display reading for your documentation requirements. Aqua Dip EC/TDS is factory calibrated and offers total protection against humidity, which makes Aqua Dip EC/TDS ideal for field use. it is supplied with batteries and instructions. Range: 0 to 3999 microsiemens/cm EC, 0 to 2000 milligrams per liter (ppm) TDS, 0.0 to 60.0 degree C. Resolution: 1 microsiemens/cm EC, 1 milligrams per liter (ppm) TDS, 0.1 degree C. Accuracy at 20 degree C: +/-2 percent F.S. EC, +/-2 percent F.S TDS, +/-0.5 degree C. Factory calibrated. TDS factor: 0.5. Temperature compensation: automatic, with beta equal to 2.1 percent / degree C. Environment: 0 to 50 degree C (32 to 122 degree F); RH maximum 100 percent. Battery type/life: 1.5V (2) AAA/approximately 180 hours of use. Measures 3-11/16" length by 1-1/2" width by 17-19/64" height. Weight: 7.8 ounces.
-
3.5 of 5.0 with 25 Reviews
SALE PRICE: $201.95
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, AC Volts, LED display, W96xH48mm, 4 digit, 0-500V Input, 3 Relay Outputs + 4-20mA Output, 100-240 VAC
-
3.5 of 5.0 with 14 Reviews
SALE PRICE: $221.95
Manufacturer: Autonics
Brand: Autonics USA, Inc
Manufacturer: Autonics
Brand: Autonics USA, Inc
Meter, Pulse, LED W72xH36mm, 5-Digit, 13 Modes, Indicator, RS485 communication sub output, 100-240 VAC
-
3.5 of 5.0 with 15 Reviews
SALE PRICE: $238.23 1% OFF
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI7698290
Manufacturer: Hanna Instruments
Brand: Hanna Instruments
Model: HI7698290
|
The Hanna Instruments HI 7698290 short calibration beaker holds buffer solution during the calibration process. The sensor is designed for use with the HI 9829 or HI 98290 GPS multiparameter meter and a compatible digital probe in environmental monitoring. During calibration, the threaded beaker is screwed onto the probe body. Text prompts during quick calibration indicate when to empty the beaker, when to shake the probe, and when to reinsert the probe in the beaker. Two beakers are recommended for each buffer solution: the first for rinsing the sensor, and the second for calibration.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts or other compounds present in water), dissolved oxygen (DO, the amount of oxygen in a liquid), temperature, total dissolved solids (TDS, anything present in water other than the pure water molecule and suspended solids), salinity, resistivity, and oxidation reduction potential (ORP). Applications for multiparameter meters include water testing, pharmaceuticals, agriculture, winemaking, water-treatment plants, and aquaculture. Devices with a benchtop body are often used for indoor laboratory use or in a manufacturing setting; handheld, portable devices are typically used for fieldwork. Sensors are used with a meter to measure the parameters of a substance.Hanna Instruments manufactures analytical instrumentation and supplies, including pH meters, electrodes, chemical reagents, and buffer solutions. The company, founded in 1978 and headquartered in Woonsocket, RI, meets International Organization for Standardization (ISO) standard 9001.
-
3.5 of 5.0 with 44 Reviews
SALE PRICE: $249.99 14% OFF
Manufacturer: AZ
Brand: Unknown
Manufacturer: AZ
Brand: Unknown
|
CO2/Temp./RH Meter AZ-7755 FEATURES: Low cost portable meter checking indoor air quality Big LCD displays CO2 ,temp. & humidity simultaneously Designed with NDIR (non-dispersive infrared) waveguide technology CO2 sensor Manual calibration is recommended Warning carbon dioxide level programmable Backlight function for working in dark place Long time drift compensation Audible alarm (~80db)threshold setting Max ,min, average functions included PC output every 2 seconds for on line analysis Hold function freezes current readings Display 8 hrs TWA value (time-weighted average) or 15 minutes STEL value (short-term exposure limit) Housing design surrounds with rails to help air ventilation for quick and accurate response Easy to calibrate at fresh air around 380-420ppm SPECIFICATIONS: Measuring range:0~9999 ppm, (2001~9999 ppm out of scale range) Temperature:-10~60 C (14~140 F) Relative Humidity:0.1%~99.9%RH DP(Dew point temp.):-20.0~59.9 C WB(Wet bulb temp.):-5.0~59.9 C Resolution:1ppm , 0.1 C/ F, 0.1%RH Accuracy:+50ppm+5% of reading(0~2000ppm) Other ranges are not specified Temperature:+0.6 C/+0.9 F Relative Humidity:+5%RH (at 25 C , others) Response time Meter size (LxWxH,mm):205x70x56 200g
-
3.5 of 5.0 with 32 Reviews
SALE PRICE: $264.46 1% OFF
Manufacturer: Bluelab
Brand: Bluelab
Manufacturer: Bluelab
Brand: Bluelab
BlueLab Combo Meter
-
3.5 of 5.0 with 48 Reviews
SALE PRICE: $304.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Eutech Instruments
Manufacturer: COLE-PARMER
Brand: Eutech Instruments
|
The pH 550 and 560 monitors are used to measure pH /ORP and temperature values in applications such as water treatment and monitoring, chemical processing, or food processing. The monitors have user-friendly features like menu-driven programs and calibrations that are easily performed with the push-button keypad. All setup and calibration parameters are retained in the nonvolatile memory to prevent data loss during power outages. Measurements are compensated for temperature variations automatically when used with pH electrodes that have temperature elements. The monitors also offer manual temperature compensation with independent settings for calibration and process temperature. One- or two-point calibrations can be performed with USA or NIST buffer sets. All values, operational, and error messages are indicated on the large, dual-line LCD. Order 100 Pt RTD pH and ORP electrodes from pages XXXX-XXXX. Order BNC to spade lug adapter to install pH or ORP electrodes. The pH 560 monitor has additional features including two switching contacts as set point relays. The relays have separately adjustable high and low set point hysteresis (dead bands) to prevent relay chattering. The relays feature a 0 to 2000 second time delay to prevent false alarms and unneeded control. The pH 560 also features a backlit and UV light protected display. What's Included: 110 VAC to 9 VDC power adapter Small size, economical monitor or controller with display Measure and display both pH/ORP and temperature Automatic or manual temperature compensation Asymetrical or symmetrical mode operation
|
|