Multiparameter Meters - Page 35

Manufacturer: Reed Brand: REED Instruments Model: SD-4307

The Reed SD-4307 portable multiparameter meter provides electrical conductivity, total dissolved solids (TDS), salinity, and temperature readings for water quality testing applications, and has automatic temperature compensation and an LCD screen. This meter has automatic temperature compensation (ATC) for accurate readings in fluctuating temperatures, and provides single or multi-point calibration to a standard conductivity value. The backlit, 38mm x 52mm (H x W) LCD screen provides clear readings in bright or dim lighting. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right.) The electrode housing is made of carbon for durability and long life. The meter has an integrated SD memory card slot to enable automatic or manual data logging with a sampling time between 1 second and 9 hours. It has a USB 2.0 port and RS-232 interface to allow data transfer to a computer. It has a data hold function and can record the recent maximum and minimum readings for later review. The unit operates on six 1.5V AA batteries, and can be set to turn off automatically after a short period of inactivity to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. It comes with a probe, a hard-sided carrying case, and instructions. This meter is suitable for water testing applications in hydroponics, fresh water systems, and aquaculture.SpecificationsConductivity range (autoranging) and resolution0 to 200.0μS with resolution of 0.1μS0.2 to 2.000mS with resolution of 0.001mS2 to 20.00mS with resolution of 0.01mS20 to 200.0mS with resolution of 0.1mSConductivity accuracy+ or - (2% of the full scale + 1d) at 23 degrees C + or - 5 degrees CSalinity range and resolution0 to 12% salt (% weight) with a resolution of 0.01%Salinity accuracy0.5% salt valueTDS (total dissolved solids) range and resolution0 to 132ppm with resolution of 0.1ppm132 to 1,320ppm with resolution of 1ppm1,320 to 13,200ppm with resolution of 10ppm...

Manufacturer: Aqua Galaxy Brand: Aqua Galaxy Model: AG-SAM-1750

The SAM-1 smart aqua meter from Hydro Galaxy turns your smartphone or tablet into a powerful and convenient pH meter. iPhone/iPad not included; used for display purposes along with the screen image Coming to Android devices this holiday season.

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, AC Amps, LED, W72xH36mm, 4-Digit, 0-5A Input, Relay + RS485 Communication Output, 100-240 VAC

Brand: Milwaukee

Smart 3-in-1 portable meter (replaces MISM802) 1 probe for pH, conductivity and TDS Automatic Temperature Compensation Faster Processor with The New Chipset and Motherboard 100% Larger & Easier To Read LED Display Smaller, Ergonomic & Lighter Case Design Easier & Faster To Calibrate Longer Battery Life Specifications: Range - pH: 0.0-14.0 pH EC: 0-6.00 mS/cm TDS: 0-4000 ppm Resolution - pH: 0.1 pH EC: 0.01 mS/cm TDS: 10 ppm Accuracy - pH: ± 0.2 pH EC/TDS: 2%-Full Scale Conversion - .65 Calibration - Each Position: 1 Point - Manual Environment - 0-130°F Battery Type - 9V Alkaline (included)

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI122-01

The Hanna Instruments HI 122-01 is a benchtop pH, oxygen reduction potential (ORP)/mV, and temperature meter with built-in printer with manual temperature compensation, Automatic Temperature Compensation (ATC), five-point pH calibration, a multilevel LCD screen, a built-in printer, and automatic logging. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in lab, industrial and food applications. An ORP meter, also known as a redox potential tester, is used to measure the oxidization or reduction capacity of a solution, and to monitor chemical reactions and ion activity. It is commonly used for water testing, pulp bleaching, and for biological sample analysis in swimming pools, cooling towers, waste water treatment, and industrial applications. The multilevel LCD screen simultaneously displays the current measurement and the current temperature. Graphics display electrode condition and electrode response. A hold function freezes readings for recording. Log-on-demand stores up to 50 samples and auto-logging stores up to 1000 samples for each input channel. The meter has an opto-isolated RS-232 serial port for data transfer. ATC is provided by the HI 7662-T temperature probe (included). The meter has up to five-point calibration with seven memorized buffers (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, and 12.45 pH) and two custom buffers. A calibration check feature provides status of electrode condition and response time and status of the buffer solutions during calibration. The meter comes with the HI 1131P glass body, ceramic single-junction pH electrode with a spheric tip, a Bayonet Neill-Concelman (BNC) connector + pin connector, and a 1m (3.3') coaxial cable. The meter measures ORP/mV when using a compatible ORP electrode (not included). The operating temperature is 0 to 50 degrees C (32 to 122 degrees F) with a relative humidity of 95 percent. The input impedance is 10 E 12 Ohm. The meter power supply is 115V and it comes with a 12VDC adapter and weighs 500g/1.1lb.The HI 12...

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, Pulse, LED W72XH36mm, 5 Digit, 13 Modes, 5 NPN Open Collector Output, 100- 240 VAC

Manufacturer: Autonics Brand: Autonics USA, Inc

Meter, Pulse, LED, W96xH48mm, 5-Digit, 13 Modes, 5 PNP Outputs + Transmission output (DC4-20 MA), 100-240 VAC

Manufacturer: Baoshishan Brand: Baoshishan

Applications 1. Extract serum from blood             2. Extract the supernatant from a variety of samples 3. Rapid subsidence of samples           4. Separation of trace blood cells 5. Microbial sample processing           6. PCR experimental division centrifugal Note All products have been checked and packaged in good condition before shipping After your order is confirmed,the product will be sent to your hands for 7-13 workdays. If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution. Please take a few seconds to leave a great feedback if you are satisfied with our product

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI9813-5N

The Hanna Instruments HI 9813-5N waterproof portable meter with multiparameter probe displays pH, electrical conductivity (EC), and total dissolved solids (TDS) on a large LCD screen for agricultural applications such as hydroponics, greenhouses, farming, and nurseries. The meter has Automatic Temperature Compensation (ATC) for pH and conductivity measurements. The large LCD screen displays the parameter being measured and calibration instructions. Dials located on front panel make calibration quick and simple, even for non-technical users. The battery error protection system alerts the user if battery power is low to avoid adversely affecting readings. Percentage of battery charge is displayed at meter start-up.The HI 1285 multiparameter probe has a fiber junction and gel electrolyte for fast response and reduced contamination that is suitable for harsh environments, such as fertilizer solutions. It has an 8-pin DIN (Deutsches Institut für Normung) connector and a 1-meter/3.3-foot cable.The meter comes with pH buffer calibration solution sachets, calibration solution, electrode cleaning solution, one 9V battery, and a carrying case.SpecificationspH range0.00 to 14.00 pHpH accuracy+ or – 0.01 pHConductivity range0 to 20.00mS/cmConductivity accuracy+ or – 2% (full scale)TDS range0 to 10.00ppt (g/L)TDS accuracy+ or – 2% (full scale)Temperature range0 to 60 degrees C/32 to 140 degrees FTemperature accuracy+ or – 0.5 degree C/1 degree FProbe (included)HI 1288Battery type, life(4) 1.5V AAA, approximately 500 hoursWeight230g/8.1oz.Dimensions145 x 80 x 36 mm/5.7 x 3.1 x 1.4 inches (H x W x D)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.A multiparameter meter is a benchtop or handheld device that can take multiple readings on a single sample. It measures parameters such as the pH level (acidity or alkalinity of a substance), conductivity (the amount of salts or ...

Manufacturer: Hanna Instruments Brand: Hanna Instruments Model: HI1288

The Hanna Instruments HI 1288 is a pH and electro-conductivity (EC) electrode for HI 991300 and HI 991301 portable meters and has a single cloth junction, Automatic Temperature Compensation (ATC), polyvinyl chloride (PVC) body, flat tip, internal amplifier, Deutsches Institut für Normung (DIN) connector, and a 1.2m (4') seven-pole cable. A pH electrode is commonly attached to a pH meter to measure the pH of a substance such as water, food, beer, or wine in lab, industrial, and food applications. An internal thermometer sensor in this electrode provides ATC for accurate readings in fluctuating temperatures. The single cloth junction reduces contamination. The PVC body with 8.5mm spherical tip is for general purpose and field applications. An internal amplifier provides a strong low impedance signal from the electrode to the HI 991300 and HI 991301 portable meters. A DIN connector provides a tight cable connection and the electrode comes with a seven-pole 1.2m (4') cable. SpecificationspH range0 to 13JunctionClothElectrolyteGelReferenceSingle Ag/AgClBody materialPVCOperating temperature0 to 60 degrees C (32 to 140 degrees F)Maximum pressure14.7 psi (1 bar)ConnectorDINCable1.2m (4') seven-poleAn electrode, also called a sensor or probe, is an instrument used with a meter to test and measure parameters of a substance. All electrodes are probes or sensors, but not all probes are electrodes or sensors. Probes, such as temperature probes, are used to penetrate a material for measurement. Common electrode types are pH, total dissolved solid (TDS), and ion selective electrode (ISE). Electrodes can be half-cell or full-cell (also called combination) types. They can be refillable or non-refillable. Housing material is typically glass or epoxy, and sensors are commonly made with stainless steel or a glass bulb. pH electrodes, which measure the pH of a substance, often have a glass bulb. The bulb senses hydrogen ions, and generates a millivoltage that is picked up by the filling solution and transferred to a wire that conn...