Pressure Calibrators - Page 33

Manufacturer: Meriam Process Technologies Brand: Meriam Model: MH10-KT

Meriam's hand pumps can be used with a variety of products such as our MGF16BN gauges, manometers, model 35EE Meri-Cal, MFT Series, M2 series smart manometers and the M1 series digital manometers/calibrators. The MH-10KT uses a fully adjustable stroke control to allow for fast priming or filling of test systems. This gives the operator the ability to switch as needed to a smaller stroke for easier pumping at high pressure. 0-10,000 psi (700 Bar) Compatible with most hydraulic fluids, oils and water connections (2 ports) 1/4" NPT/BSP. 2 Year warranty (includes dropping).

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919037

The T-140 Pressure Calibrator/Manometer is designed to give the technician laboratory-grade accuracy in a rugged, easy-to-use instrument. The T-140 is available in several ranges — 10” H2O, 200” H2O, and 30, 100, 300, and 3,000 PSI. Operation of these calibrators is made easy through the use of a sealed membrane keypad with simple controls. When combined with a Martel Hand Pump, the T-140 Kit makes a great package to handle your pneumatic calibration requirements

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540660

Fluke voltage test probe for 1760 3 phase power quality recorder. Range Rms: 4 V to 680 V. Vnom: 10 V. Maximum continue: 1000 V. Fast transient range: Vp less than 1ms: 6000. Intrinsic error: greater than 0.15 percent. Operating voltage: 600 V CAT IV.

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 1919210

BetaGauge PI PRO Digital Test Gauge takes the concept of an analog Test Gauge, and brings it to a new level. The NEW BetaGauge P. I. PRO combines the accuracy of digital technology with the simplicity of an analog gauge and achieves performance, ease-of- use, and a feature set unmatched in the pressure measurement world. The BetaGauge PI PRO builds on the proven performance of the BetaGauge PI with a new purpose designed Zinc-Aluminum Alloy High Pressure Cast housing. The new housing improves the environmental integrity of the gauge in a lighter and smaller yet more rugged form factor. An optional external 24 VDC power input is available for applications where the BetaGauge P. I. PRO will be permanently incorporated into a process line. A protective rubber boot is standard to help protect the BetaGauge P. I. from damage when dropped.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540553

Fluke TPS shunt 20MA. Measuring range selectable per software: 0 to 55 mA. Peak current for sinusoidal currents. 77.8 mA, Imax = 1.5A. Intrinsic error 0.2 percent. Frequency range: DC to 3.0 kHz. Operating voltage: 300 V CAT IV. Phase error: 0.1 degrees.

Manufacturer: Fluke Brand: Fluke Model: 4636980

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3345766

Fluke 1 phase mini current clamp set for power quality logger. I5A/50A Current.

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-162X

Fluke EI-162X Clip-on Current Transformer (Sensing) with Shielded Cable Set The EI-162X Clip-On Current Transformer (Sensing) is used along with the Fluke 1623 or 1625 to perform Selective and Stakeless testing. Selective testing means using one clamp along with earth ground stakes to provide earth ground loop resistance values for one earth ground electrode. Stakeless testing uses two clamps to perform earth ground loop resistance measurement without stakes. Both tests have the advantage of providing measurements with no disconnection from the grounding system! Safer and quicker. Includes a shielded cable.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540649

Fluke voltage test probe for 1760 3 phase power quality recorder. Range Rms: 10 V to 1700 V. Vnom: 1000 V. Maximum continue: 2000 V. Fast transient range: Vp less than 1ms: 6000. Intrinsic error: greater than 0.1 percent. Operating voltage: 600 V CAT IV.

Manufacturer: Fluke Corporation Brand: Fluke Model: I3000 FLEX-4PK

The i3000s Flex is an AC current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas. Three ranges: 30A, 300A and 3000A, 1, 10 or 100 mV/A output. Ideal for current measurement on thick and hard to reach conductors without breaking the circuit. Maximum conductor diameter 178mm. CAT III 600V safety rating. Current ranges: 30A, 300A, 3000A AC rms. Output sensitivity (AC-coupled): 100 mV, 10 mV, 1 mV per A. Load impedance: 100 kilo ohm minimum. Accuracy at +25 degree C: +/-1 percent of range (45 Hz to 65 Hz). Linearity 10 to 100 percent of range: +/-0.2 percent of reading. Noise: 8 mV AC rms (30 A), 2 mV AC rms (300A, 3000A). Frequency range: 10 Hz to 50 kHz (-3 dB). Phase error: less than +/-1 degree (45 Hz to 65 Hz), +/-10 degree (at 20 kHz). Position sensitivity with cable greater than 25 mm from the coupling: +/-2 percent of range. External field with cable greater than 200 mm from the head: +/-1 percent of range. Power supply: 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply. Temperature coefficient: +/-0.08 percent of reading per degree C. Working voltage: 600V AC rms or DC. Head circumference: 610mm. Head cable diameter: 14.3mm. Head bend radius: 38.1mm. Cable length (head to electronics): 2m. Output connection: 0.5m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter. Operating temperature range: -20 to +90 degree C (-4 to 190 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Storage temperature range: -40 to +105 degree C (-40 to 221 degree F) (head), -20 to +85 degree C (-4 to 185 degree F) (electronics). Operating humidity: 15 to 85 percent (non-condensing).