Pressure Calibrators - Page 37

Manufacturer: Fluke Brand: Fluke Model: 4359377

Needed to perform 3-Pole Fall-of-Potential testing (Stake testing). Used with both the Fluke 1623-2 and Fluke 1625-2. This is a subset of what is included in the Fluke 1625-2 Kit.

Manufacturer: Fluke Brand: Fluke Model: 4636971

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Martel Electronics Brand: Martel Electronics Model: 5656140

Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.Martel Electronics manufactures test and measurement equipment such as calibrators, pressure pumps, and meters. The company, founded in 1987 and headquartered in Derry, NH, meets International Organization for Standardization (ISO) standard 9001.

Manufacturer: Fluke Corporation Brand: Fluke Model: BE9005 120

7.5V DC battery eliminator for operation of calibrator from 120 volt ac line. UL/CSA recognized. Application: for use in North America; 120V AC 60 Hz lines. Measures 3-51/64" width by 2-1/2" height by 2-25/128" depth. One year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: 3024692

Fluke LG cables for high current shunt.

Manufacturer: Fluke Brand: Fluke Model: 4359389

Needed to perform 3- and 4-Pole Fall-of-Potential testing (Stake testing). Used with both the Fluke 1623-2 and Fluke 1625-2. Already included in the Fluke 1625-2 Kit.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

The Series CHP Pneumatic Hand Pump is the most dependable and rugged pump for applications up to 100 psi or 28.8" Hg vacuum. The durable Acetal plastic and anodized aluminum construction prevents body heat transfer, resulting in drift-free, accurate readings. The Series CHP is equipped with oversized check valves in order to provide smooth and controlled operation. Dual O-Rings on all pistons ensure the pump to be leak-free. The unit includes a 2 foot long hose, 1/8" female NPT gage fitting, and 1/8" NPT pipe plug. The Series CHP is ideal for checking calibration of pressure or vacuum gages, switches, or transmitters.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-12

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 30.00 PSI Range.

Manufacturer: Fluke Corporation Brand: Fluke Model: SCC290

Full version of FlukeView software. Includes hard protective C290 carrying case for 190 series II ScopeMeters.

Manufacturer: Fluke Corporation Brand: Fluke Model: I3000S

Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools. The i3000s is a clamp-on AC current clamp for use with oscilloscopes and multimeters with banana input using the supplied dual banana to BNC adapter. The clamp is optimized for measurement on power distribution systems. Nominal current range: 30A, 300A, 3000A. Continuous current range: 1A - 30A, 1A - 300A, 1A - 3000A. Maximum non-destructive current: 4000A. Lowest measurable current: 1A. Basic accuracy: 2 percent + 2 A (48-65 Hz) (percent reading + floorspec). Useable frequency: 10 Hz - 100 kHz. Output levels: 10 mv/A, 1 mv/A, 0.1 mv/A. Maximum voltage: 600V. Maximum conductor diameter: 64mm. Output cable length: 2.1m.