Pressure Calibrators - Page 34

Manufacturer: Fluke Corporation Brand: Fluke Model: AC285-FTP

Includes model a pair of red and black extra large alligator clips plus adaptors to securely attach the alligator clips to Fluke fused test probes FTP-1, FTPL-1, FTP and FTPL. SureGrip has rubber overmolded surfaces for a firm reliable grip. Multi-purpose tooth pattern grips anything from fine gauge wire to a 20mm (0.75") nut. Strong, nickel-plated steel jaws for a tight hold. Conforms to safety standard IEC61010-031:2002 +A1:2008, CAT III 1000V, CAT IV 600V. 10A maximum, pollution degree 2, 2000 m altitude. Operating temperature: -4 to 131 degree F, 95 percent RH. One-year warranty.

Manufacturer: Fluke Corporation Brand: Fluke Model: 80PK-24

The innovative SureGripTM design has a soft rubber handle combined with a ergonomic shape is so comfortable to hold that you'll forget about the probe and focus on the measurement. All SureGrip probes have an improved, more flexible strain relief for a long life.

Manufacturer: WIKA Brand: WIKA

Pressure gauge with inductive contact VAC-Pressure -14 to 45 PSI , SS 1/4 MVCR

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-61

The Fluke 61 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -18 to +275 degrees C (0 to 525 degrees F) with an accuracy of + or -2% of the reading or + or - 2 degrees C (+ or -3.5 degrees F), whichever is greater from -1 to +275 degrees C (30 to 525 degrees F) and + or - 3 degrees C (+ or -5 degrees F) outside this range. It has an 8:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-18 to +275 degrees C (0 to 525 degrees F)Infrared sensor accuracyFrom -1 to +275 degrees C (30 to 525 degrees F): + or - 2% of the reading or + or - 2 degrees C (+ or - 3.5 degrees F), whichever is greater; From -18 to -1 degree C (0 to 30 degrees F) + or - 3 degrees C (+ or - 5 degrees F)Display resolution2 degrees C / 5 degrees FDistance-to-spot ratio8:1Power Supply9V or NiCd batteryWeight227g / 0.5lb.Dimensions184 x 45 x 38mm / 7.25 x 1.75 x 1.5 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricit...

Manufacturer: ifm electronic gmbh Brand: IFM Efector Model: PX3233

Electronic Pressure Sensor, Measuring Range: 0...250 Psi, Process Connection: 1/4''Npt A / M5 I, 2-Wire, Dc, Operating Voltage: 9,6...32 V Dc, 4...20 Ma, Quick Disconnect, M12 Connector, E1 Compliant, Housing Material: Stainless Steel 316L / 1.4404 Fpm (Viton) Pa Epdm/X (Santoprene), Materials (Wetted Parts): Stainless Steel (303S22) Ceramics Fpm (Viton).

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-63TCAL

The Fluke 63 infrared thermometer takes noncontact temperature measurements and is used for monitoring electrical, HVAC, and automotive systems. It measures temperature from -32 to +535 degrees C (-25 to +999 degrees F) with accuracy that varies from + or - 1 degree C to + or - 3 degrees C depending on the temperature range. It has a 12:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It can display the current temperature and the maximum temperature for comparison during process monitoring. The thermometer enters sleep mode after seven seconds of inactivity to help preserve battery life. The CE mark indicates compliance with applicable European Union (EU) directives. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in electrical, HVAC (heating, ventilation, and air conditioning), mechanical, and automotive environments.SpecificationsTemperature range-32 to +535 degrees C (-25 to +999 degrees F)Infrared sensor accuracy-32 to -26 degrees C (-25 to -15 degrees F): + or - 3 degrees C (+ or - 5 degrees F); -26 to -18 degrees C (-15 to 0 degrees F): + or - 2.5 degrees C (+ or - 4 degrees F); -18 to +23 degrees C (-0 to 73 degrees F): + or - 2 degrees C (+ or - 3 degrees F); For targets above 23 degrees C (73 degrees F): + or - 1% of reading or + or - 1 degrees C (+ or - 2 degrees F), whichever is greaterDisplay resolution2 degrees C / 5 degrees FDistance-to-spot ratio12:1Power Supply9V or NiCd batteryWeight320g/11oz.Dimensions200 x 55 x 160mm / 8 x 2 x 6 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focus...

Manufacturer: Fluke Brand: Fluke Model: 4112745

Models covered: • Fluke 568 Infrared and Contact Thermometer • Fluke 568 Ex Intrinsically Safe Infrared Thermometer.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-5

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 100.0 PSI Range.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-14

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 775.0mm Hg Range.

Manufacturer: Meriam Process Technologies Brand: Meriam Model: ZM101-4

Accutube brand multi-port averaging pitot tubes are the smart choice when ease of installation, cost-effective operation and accurate flow measurement is a priority. The M1 Series of handheld manometers from Meriam process technologies combines form, fit and function to deliver precision pressure measurement for field, plant or lab use. The M101 delivers +/- 0.10 percent FS accuracy and additional features normally found on higher priced instruments. Pressure limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less. Accuracy: no temperature effect over the entire operating range 14F degree to 122 degree F (-10C degree to +50 degree C). Min/Max (M101 only): Displays the MIN and MAX pressures. Hold (M101 only): freezes the pressure measurement on the display, however, the bar graph is still active. Ave (M101 only): Displays a continuous filtered average of the pressure measurements. Temp: displays the internal ambient temperature of the M1 in degree C or degree F. Record mode: The M1 can store up to 240 pressure measurements. Automatic the current value is automatically stored every 5 seconds, for up to 20 minutes. Manual - the current value is stored every time the Units key is pressed, up to 240 times. A green backlight is user activated via the back light key. A red back light is automatically activated during an error/over range condition. To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity. M1 can be calibrated in the field for zero and span. Bar Graph: Horizontal bar for full scale pressure reference (0-100 percent). M101 (specify pressure range) Calibrator All models include the protective red rubber boot, 4 AA batteries, and hard copy of the user ’s manual. 0 - 1551mm Hg Range.