|
|
-
3.6 of 5.0 with 7 Reviews
SALE PRICE: $269.99 3% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-71X-TRAP
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-71X-TRAP
FLUKE FLUKE-71X-TRAP LIQUID & DIRT TRAP, PRESSURE CALIBRATOR
-
3.6 of 5.0 with 34 Reviews
SALE PRICE: $298.01
Manufacturer: Agilent Technologies
Brand: Agilent Technologies
Manufacturer: Agilent Technologies
Brand: Agilent Technologies
Agilent Pressure regulator 0-100 psi - AA
-
3.6 of 5.0 with 26 Reviews
SALE PRICE: $319.95 51% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: DP120
Manufacturer: Fluke Corporation
Brand: Fluke
Model: DP120
|
Designed to make measurements on signals with floating reference, the DP120 Differential Probe has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 megaohms in parallel with 6 pF. Input impedance between the inputs is 10 megaohms with a capacitance of 5 pF. Shrouded banana probe tip Input. 1.5 meter probe length. Maximum input voltage to ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031. Maximum differential voltage: 1000V DC or1000Vrms or 1200V (DC + AC peak). Safety designed 0.5m BNC output cable. 200x and 20x attenuation. DC to 20 MHz (-3 dB) bandwidth. +/-2.5 percent accuracy. 17.5 ns rise time. CMRR: 200x: at 60 Hz = 80dB, at 1 MHz = 50 dB 20x: at 60 Hz = 70dB, at 1 MHz = 40 dB. Battery type: Alkaline 9 volt, NEDA, IEC6LR61. 8-hour operation, 400-hour stand by battery life. PM 8907/80n (optional) power adapter. AC85A large jaw alligator clips and AC83 pin-grabber test clips included accessories.
-
3.6 of 5.0 with 12 Reviews
SALE PRICE: $459.00 1% OFF
Manufacturer: Fluke Calibration
Brand: Fluke
Model: PPA9159-CAL
Manufacturer: Fluke Calibration
Brand: Fluke
Model: PPA9159-CAL
Fluke PPA9159-CAL Fine Increment Weight for Use with kPa, MPa, Bar, or kgf/cm2 Weight Set.
-
3.5 of 5.0 with 30 Reviews
SALE PRICE: $53.39 3% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 847793
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 847793
Digital multimeter replacement fuse. 600V Voltage. 15A Current.
-
3.5 of 5.0 with 34 Reviews
SALE PRICE: $56.75 19% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9093/001
Manufacturer: Fluke Corporation
Brand: Fluke
Model: PM9093/001
Male BNC to dual female BNC T-piece. Set consists of two adapters. BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 series shielded banana jack inputs. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.
-
3.5 of 5.0 with 3 Reviews
SALE PRICE: $67.55 18% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: DR80
Manufacturer: Fluke Corporation
Brand: Fluke
Model: DR80
Meter display upgrade kit for use with 80 series meters.
-
3.5 of 5.0 with 5 Reviews
SALE PRICE: $95.83 27% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3511872
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3511872
|
The Fluke TI-TRIPOD tripod mounting base is a one-piece mounting accessory that attaches to Fluke thermal imagers for mounting on a tripod or monopod. It provides stability for Fluke Ti32, Ti29, Ti27, Ti25, Ti10, Ti9, TiR32, TiR29, TiR27, and TiS thermal imagers (sold separately). It is constructed of plastic with a metal insert for durability.Thermal imagers, also known as thermal cameras, infrared imagers, or infrared cameras, capture images of heat patterns for examination and analysis. Objects emit infrared light, and this light radiates heat in varying temperatures. A sensor within a thermal imager detects radiant heat and transforms it into patterns on a thermal imaging system. Thermal imagers have LCD screens to display an image of the object in a range of color that corresponds with variations in temperature. Technicians can transfer images and video to a computer for process monitoring and analysis. Some thermal imagers can show visual images along with thermal images to make an object more identifiable. Thermal imagers are used in an array of industries, including construction and building maintenance, manufacturing, firefighting, medicine, law enforcement, and military among others. A wide range of applications include building diagnostics to identify hidden moisture or heat leaks, industrial and commercial maintenance to prevent or identify electrical or mechanical equipment failure, thermal cameras that restore visibility in fire control, medical and veterinary diagnostic imaging to identify health conditions, and surveillance cameras for law enforcement and facility security.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
-
3.5 of 5.0 with 1 Reviews
SALE PRICE: $259.00 1% OFF
Manufacturer: Martel Electronics
Brand: Martel Electronics
Model: 1111209
Manufacturer: Martel Electronics
Brand: Martel Electronics
Model: 1111209
|
Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.Martel Electronics manufactures test and measurement equipment such as calibrators, pressure pumps, and meters. The company, founded in 1987 and headquartered in Derry, NH, meets International Organization for Standardization (ISO) standard 9001.
-
3.5 of 5.0 with 10 Reviews
SALE PRICE: $262.83 57% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700BCW
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700BCW
|
This Fluke 700BCW barcode wand has an 8.2' (2.5 m) serial cable and can be used to scan and decode linear one-dimensional (1D) barcodes. The wand is made of polycarbonate and has a sapphire tip to resist scratches and wear. An LED indicator lights up to indicate a successful swipe. The serial cable connects the barcode wand to a computer or host system (not included) to transmit barcode data. The barcode wand is pen-shaped for comfort, weighs 5.7 oz., and measures 6-5/16" (160 mm) long and 7/8" (23 mm) in diameter. It is suitable for scanning Codabar, Code 11, Code 39, Code 93, Code 128, EAN-8, EAN-13, Interleaved 2 of 5, MSI, UPC-A, and UPC-E barcode symbologies.Barcode scanners, also known as barcode readers, can be used to scan and decode barcodes and to transmit barcode data to a computer or another host system. Barcode readers with a single-line laser can be used to scan linear, one-dimensional (1D) barcodes. Some lasers can produce light in an omnidirectional pattern to allow scanning of barcodes from different angles. Other barcode readers contain CCD (charge-coupled device) light sensors instead of a laser for accuracy and wear resistance. Barcode scanners with raster scanning, area imaging, and other scanning technologies can allow scanning of two-dimensional (2D) or Portable Document Format 417 (PDF417) barcodes, among other types. Some barcode readers provide onboard flash memory to allow the storage of barcode data before transmitting it to a computer or host system through a USB cable or wireless WLAN or Bluetooth connection. Many barcode readers have a handle for handheld use and come with a stand or a charging cradle for fixed position applications, while others are designed for stationary use on a counter or another flat surface. Some portable readers are small enough to be carried in a pocket or attached to a lanyard. Barcode readers are used at retail checkout counters and other points of sale (POS) locations and in warehouses and shipping facilities.Fluke Corporation manufactures electrical tes...
|
|