Dimensional Calibration - Page 53

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 619052

The Mitutoyo 619052 plain jaw is for use with square gage blocks to build a measuring instrument for machining tasks and calibration of tools. This item can be used to measure inside or outside diameters. It is constructed of steel for durability and the surfaces are lapped for accuracy. The base width of this instrument is 24.7 mm, the tab width is 9 mm, the total height is 39.9 mm, and the thickness is 0.5".Gage blocks (also called gauge blocks, Jo blocks, Hoke blocks, and Johansson gauges) are precision ground and lapped metal or ceramic blocks, used for calibrating precision measuring equipment and as a length standard in manufacturing. Gage blocks are square or rectangular in shape, with flat and parallel measuring surfaces, and usually have an engraved unique serial number and nominal length (provided in either inches or millimeters). They often come in sets with blocks of varying lengths, so that many different standard lengths can be created by stacking and wringing them. Wringing is the process of sliding blocks together with a small amount of pressure, in order to create a longer gage block stack.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 177-204

SETTING RING, 4MM

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 3900-3049

HHIP parallels are furnished by pair and it is made of high grade tool steel, stabilized and thoroughly hardened to HRC 58. Surface finish to 16 micron inches. High precision - 4 faces accuracy within 00015" per 6 inches. Size is 1 x 2 x 12".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614330-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614236-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Fowler Brand: Fowler

1/4 - 3/4 Universal Transfer Punch Features: Covers a large range with just 1 punch Spring loaded assures perfect hole center alignment Self centering Made of hardened tool steel

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 3900-3008

HHIP Precision parallel set includes 1/2" x 7/8" x 6", 1/2" x 1" x 6", 1/2" x 1 1/8" x 6", 1/2" x 1-1/4" x 6", 1/2" x 1-3/8" x 6", 1/2" x 1-1/2" x 6", 1/2" x 1-5/8" x 6", 1/2" x 1-3/4" x 6" size. Made from fine qualify tool steel stress relieved against distortion, precision ground and hardened. These precision parallels are recommended for layout work, standards and set up. The holes are designed for easier handling and set ups. Hardness: case hardened RC 55 to 62 on 2 sides, top and bottom only. Complete with fitted durable plastic case. Tolerance: Parallel To 0.0003 on 2 sides, top and bottom. Dimensions: within 0.001" allowance.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 3900-3008

HHIP Precision parallel set includes 1/2" x 7/8" x 6", 1/2" x 1" x 6", 1/2" x 1 1/8" x 6", 1/2" x 1-1/4" x 6", 1/2" x 1-3/8" x 6", 1/2" x 1-1/2" x 6", 1/2" x 1-5/8" x 6", 1/2" x 1-3/4" x 6" size. Made from fine qualify tool steel stress relieved against distortion, precision ground and hardened. These precision parallels are recommended for layout work, standards and set up. The holes are designed for easier handling and set ups. Hardness: case hardened RC 55 to 62 on 2 sides, top and bottom only. Complete with fitted durable plastic case. Tolerance: Parallel To 0.0003 on 2 sides, top and bottom. Dimensions: within 0.001" allowance.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 613754-531

The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0831

HHIP grade as-2 extra long steel gage block is rectangular shape with two holes. Must have for chc machine set up. Made of the highest quality tool steel. Surface hardness: HRC 64. Complete with Manufacturer's calibration or certificate. Offering n.I.S.T. Traceable calibration conforms to mil Std 45662a, ggg G 15C, ISO/IEC 17025 accredited, ISO 9000, 10012 1, ANSI ncsl Z540 1, ISO guide 25 certified. Tolerance is +50/-30 micro inches. Size is 5".