Dimensional Calibration - Page 55

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0006

HHIP pin gage library case features Wooden drawer system for storing pin gages 001 inch set increments.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4101-0006

HHIP pin gage library case features Wooden drawer system for storing pin gages 001 inch set increments.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 614202-521

The Mitutoyo grade 00 square gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 00 gage block is commonly used within a controlled environment as a reference standard for setting high-precision measuring equipment, to calibrate low-grade gage blocks, and to inspect the accuracy of gages, mechanical parts, and tools. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a square base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. Nominal length is measured in inches, and indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.95 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibr...

Manufacturer: Starrett Brand: Starrett

234A-16 16" End Measurin

Manufacturer: ABS Import Tools Brand: HHIP

Grade: A, Ledge: 0 | INCLUDE CERTIFICATE OF INSPECTION. NOT NIST TRACEABLE | F.O.B. SHIPPING POINT. | Please let us know if you require calibration | Surface plates are checked by auto-collimator for overall accuracy assurance. | Granite surface plates m

Manufacturer: HHIP Brand: HHIP Model: 3402-0955

3.54 X 2.76 X 4.92" V-block & Clamp Set | 90° V groove accuracy are central, parallel and square with all surfaces within 0.0003". | Case is hardened and ground. | Clamps are included.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 611217-516

All Mitutoyo gage blocks meet or exceed all known specifications. The flatness and parallelism surface finish necessary to achieve the required accuracies are the same as or better than government requirements. A certificate of inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a certificate of calibration. The certificate of calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.). A certificate of accuracy, traceable to the NIST, is furnished with each Mitutoyo gage block set and individual block.

Manufacturer: Starrett Brand: Starrett Model: G-80607

Even distribution of large quartz crystals provides a smooth finish, which significantly reduces wear on the surface plate and the instruments used on it. Fine micro-finish, combined with the natural voids in the surface, prevents wringing and provides a velvety-smooth tool action. Non-quartz-bearing granite in average daily use requires resurfacing about once a year, while crystal pink plates used in these same plants have required resurfacing only once every three to five years, on average. Great surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate. Quality and economy combined. Comparable to black granite plates while outwearing them as much as 5 to 1. Standard-size plates are mounted on resilient support pads, providing isolation from normal vibration and a non-distorting 3-point suspension. Packed one per crate with skids for forklift handling.

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es

Manufacturer: GASCO Brand: Gasco

Stainless Steel regulator for Reactive Calibration Gas Mixtures, Cylinders: 34LA Aluminum, 58L, 74L, 116L and 103 Steel Cylinders, ecosmart cylinders: 44es,58es,66es, and 116es