|
|
-
4.5 of 5.0 with 19 Reviews
SALE PRICE: $48.17
Manufacturer: ABS Import Tools
Brand: HHIP
Manufacturer: ABS Import Tools
Brand: HHIP
USE ON MAGNETIC CHUCK | MATCHED PAIR 90° V-BLOCK | Universal-holds in any direction on the magnetic chuck. | Aluminum cast. | Ground all over. | Blocks transmit magnetism, are not magnetic. | V-BLOCKS: 90° Vee Capacity: Small Vee-1/2" , Large Vee-2"
-
4.5 of 5.0 with 41 Reviews
SALE PRICE: $53.19 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613552-541
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613552-541
|
The Mitutoyo grade AS-1 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for manufacturing gage applications. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Jo...
-
4.5 of 5.0 with 10 Reviews
SALE PRICE: $53.70 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613303-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613303-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement o...
-
4.5 of 5.0 with 1 Reviews
SALE PRICE: $54.95 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613520-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613520-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...
-
4.5 of 5.0 with 1 Reviews
SALE PRICE: $54.95 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613520-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613520-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...
-
4.5 of 5.0 with 5 Reviews
SALE PRICE: $55.50 1% OFF
Manufacturer: ezMachineTools
Brand: ezMachineTools
Manufacturer: ezMachineTools
Brand: ezMachineTools
These are parallel to 0.0003 inch on 2 sides, top and bottom, Within 0.0001 inch allowance. The hardness is around 55 to 62 RC. The plastic case included. These are 3/16 inch thick, 6 inch long, and 1 inch,1-1/4 inch,1-1/2 inch,1-3/4 inch wide.
-
4.5 of 5.0 with 5 Reviews
SALE PRICE: $55.50 1% OFF
Manufacturer: ezMachineTools
Brand: ezMachineTools
Manufacturer: ezMachineTools
Brand: ezMachineTools
These are parallel to 0.0003 inch on 2 sides, top and bottom, Within 0.0001 inch allowance. The hardness is around 55 to 62 RC. The plastic case included. These are 3/16 inch thick, 6 inch long, and 1 inch,1-1/4 inch,1-1/2 inch,1-3/4 inch wide.
-
4.5 of 5.0 with 3 Reviews
SALE PRICE: $56.80 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613518-531
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 613518-531
|
The Mitutoyo grade 0 rectangular gage block is made of ceramic, has its nominal length engraved in metric [millimeter (mm)] units, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of ceramic which resists corrosion, abrasion, and burrs, withstands high temperatures without melting (high thermal expansion resistance), and provides dimensional stability. This gage block has a rectangular base for accurate wringing. Nominal length is measured in metric [millimeter (mm)] units, and is indicated on the block with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 9 millimeters. It comes in a carrying case with a padded, formed interior. This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish. Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuri...
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $59.99
Manufacturer: Generic
Contents include: -1 Pair of 3/4 X 6 X 1/4" -1 Pair of 7/8" X 6 X 1/4" -1 Pair of 1" X 6 X 1/4" -1 Pair of 1-1/8" X 6 X 1-4" -1 Pair of 1-1/4" X 6 X 1/4" -1 Pair of 1-3/8" X 6 X 1-4" -1 Pair of 1-1/2" X 6 X 1/4" -1 Pair of 1-5/8" X 6 X 1/4" -1 Pair of 1-3/4" X 6 X 1/4"
-
4.5 of 5.0 with 43 Reviews
SALE PRICE: $62.96 10% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 10001
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 10001
|
|