|
|
-
4.9 of 5.0 with 42 Reviews
SALE PRICE: $171.24 23% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-1-32
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-1-32
|
The Brown & Sharpe chrome-framed outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame, thimble, and sleeve have a satin chrome rust- and glare-resistant finish. Frames with a base measurement range greater than or equal to 1†are heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.0001â€. Depending on the model, graduation markings on the barrel may be straight or slanted to help reduce parallax errors when reading. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
4.9 of 5.0 with 17 Reviews
SALE PRICE: $175.89 1% OFF
Manufacturer: ASIMETO
Brand: ASIMETO
Model: 105-02-5
Manufacturer: ASIMETO
Brand: ASIMETO
Model: 105-02-5
Carbide tipped, IP65 Digital Micrometers & Sets, ASIMETO
-
4.9 of 5.0 with 1 Reviews
SALE PRICE: $179.00 41% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 122-101
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 122-101
|
The Mitutoyo 122 series blade micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a blade anvil and spindle for measurement of groove diameter of shafts and keyways. The spindle does not rotate during adjustment, to help provide steady positioning for measurement.The micrometer’s frame is made of high-grade tool steel for durability. The vernier scale on the thimble and sleeve is graduated to 0.001mm, and has a satin chrome rust- and glare-resistant finish. Depending on the model, the spindle and anvils are made of hardened steel for durability or are carbide-tipped for wear resistance. Micrometers that measure greater than 25mm come with a standard bar for zero-setting. The unit comes with a fitted plastic case for storage. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.9 of 5.0 with 44 Reviews
SALE PRICE: $180.99 25% OFF
Manufacturer: CENTRAL TOOLS INC
Brand: Central Tools
Manufacturer: CENTRAL TOOLS INC
Brand: Central Tools
Mech. Digital Micrometer Set 0-3.
-
4.9 of 5.0 with 50 Reviews
SALE PRICE: $181.82 1% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-621-001-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-621-001-0
|
The Fowler 52-621-001 EZ-Read large-anvil micrometer has a 0 to 1" measuring range to measure workpieces with gaps or staggered teeth, such as milling cutters, saws, or irregular workpieces. The anvil is 0.550 x 1.970" (H x W) to provide a large area to bridge gaps between adjacent measuring surfaces. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right.) The digit scale has 0.0001" graduations precise readings. The carbide-tipped spindle provides wear resistance. The spindle thread is hardened, ground, and micro-lapped to provide smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated steel frame helps reduce temperature-related expansion or contraction providing accurate measurements. The micrometer includes a fitted case. SpecificationsDisplay typeDigitAnvil dimensions (H x W)0.550 x 1.970"Measuring range0 to 1"Graduation interval0.0001"Thimble styleFrictionH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right.Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the ...
-
4.9 of 5.0 with 37 Reviews
SALE PRICE: $183.99 1% OFF
Manufacturer: Starrett
Brand: Starrett
Manufacturer: Starrett
Brand: Starrett
Provides durability and reliability in a full function, economical non-output electronic micrometer.
-
4.9 of 5.0 with 21 Reviews
SALE PRICE: $188.68 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-210-20
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-210-20
A micrometer that will give you a quick check for cut or chased threads. It has been designed for comparison mea sure ments. Tapered contacting points on the micrometer are lapped flat to 0.015" for accurate thread comparison. This micrometer meets government specification GGG-C-105C. Spindle lock. Meets Federal specifications. Fixed/friction thimble.
-
4.9 of 5.0 with 45 Reviews
SALE PRICE: $196.31 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 118-101
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 118-101
|
The Mitutoyo 118 series sheet metal micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, and a vernier scale in metric units for taking precise outside diameter (OD) measurements. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, depending on the model, with a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.9 of 5.0 with 4 Reviews
SALE PRICE: $197.00 1% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 01.10101
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 01.10101
|
The Brown & Sharpe TESA Isomaster standard outside micrometer has a vernier scale in metric units for taking precise outside diameter (OD) measurements, a friction drive thimble mechanism for uniform pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame is heat-insulated to help reduce temperature-related expansion or contraction. The vernier scale on the thimble and sleeve is graduated to 0.01mm, with slanted markings on the barrel to help reduce parallax errors when reading, and a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.
-
4.9 of 5.0 with 16 Reviews
SALE PRICE: $199.00 21% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-860-301-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 54-860-301-0
|
The Fowler 54-860 series digital outside micrometer has a disc-style anvil/spindle pair, a choice of measuring range, and an LCD with an inch/metric switchable resolution for measuring the thickness of narrow grooves and difficult or closely spaced areas, such as slots and recesses. Disc micrometers are also used to measure ribs, keys, fins, cutting edges on forming tools, and the chordal thickness of gear teeth. Carbide measuring faces provide wear resistance. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016"/0.004mm on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleDisc anvil/spindle pairResolution0.00005"/0.001mmThimble styleFrictionAnvil/spindle diameter0.250"/6.35mmDisc diameter0.788"/20mmDisc center hole diameter0.315"/8mmDisc edge thickness0.035"/0.89mmTotal disc depth0.130"/3.3mmData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to m...
|
|