Outside Micrometers - Page 17

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-244-101-1

The Fowler 52-244-101-1 outside micrometer has a Vernier-scale with a 0 to 1" measuring range and a 0.256" diameter ball-style anvil/spindle pair for measuring the inside and outside diameters of sleeves, collars, tubing, and other curved and cylindrical surfaces. The Vernier scale has 0.0001" graduation intervals and an accuracy of 0.0001" for precise readings and accurate measurements. The ball-style anvil/spindle pair has hardened and ground measuring faces to contact curved surfaces at a single point for accurate measurement of inside curves. The slim anvil stem measures wall thickness in narrow and hard-to-reach spaces. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings and the zero adjustment on the sleeve ensures accurate measurements. The ratchet-stop thimble can be used independently of the friction thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing durability and long life, and microfine graduations help ensure accurate readings. The baked-enamel frame provides durability and long life. The micrometer includes a standard, a wrench, and a fitted case. SpecificationsDisplay type Vernier scale Anvil/spindle style Ball Measuring range 0 to 1" Graduation interval 0.0001" Accuracy 0.0001" Thimble style Ratchet Anvil/spindle diameter 0.256"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-129-MITUTOYO_IT

Enamel frame economy type micrometer with tungsten carbide tipped anvils

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-218-721-0

The Fowler 52-218-721 EZ-Read digit micrometer has a 0 to 1" measuring range and a spline-style anvil/spindle pair with a 0.118" pin diameter and 0.396" length to measure recesses, grooves, and splines. The digit display has 0.0001" graduation intervals and an accuracy of 0.0002" for precise readings, and precision-ground measuring faces provide accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The micrometer includes a fitted case. SpecificationsDisplay type Digit Anvil/spindle style Spline Measuring range 0 to 1" Graduation interval 0.0001" Accuracy 0.0002" Thimble style Friction Spline diameter 0.1180" Spline length 0.396" Anvil/spindle diameter 0.256"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.What’s in the Box? Fowler 52-218-721 digit micrometer Fitted case

Manufacturer: Meda - Superior Import Brand: MEDA - SUPERIOR IMPORT

Interchangeable anvils permit quick accurate measurement of tubing, cylindrical walls, from a hole or slot to an edge, and many hard-to-reach locations. *5 key Deluxe Model micrometer head *Friction thimble for exact repetitive readings. *Chrome-Plated frame. *Carbide-tipped spindle.

Manufacturer: BROWN & SHARPE PRECISION Brand: Brown & Sharpe

These micrometers continue as the standard wherever measuring consistency is vital to the quality effort. Carbide tipped faces. Straight line graduations. Fixed/friction thimble. Spindle lock. Satin chrome thimble. Black enamel frame. Meets federal specifications.

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage LCD IP54-rated outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement. The micrometer’s electronic microprocessor can set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer’s knurled ratchet thimble mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: S916-C753

Manufacturer: ABS Import Tools Brand: HHIP

.0001" GRADUATION | Graduation: .0001". | For taking measurements of workpieces which have narrow grooves or "T" slots when standard micrometer can't reach. | Microfine graduations on satin chrome finish for easy reading. | Anvil & spindle hardened & prec

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-340

The Mitutoyo 293 series Coolant Proof LCD micrometer with a 0 to 1"/0 to 25.4 mm measuring range has a digital single-value LCD readout that displays in inch and metric units with a 0.00005" (0.001 mm) resolution, a 0.00005" accuracy, and a ratchet stop thimble. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators.The micrometer's electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing is Ingress Protection certified IP65, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle and anvil have flat measuring faces that are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation...

Manufacturer: Fowler Brand: Fowler

Features 60 pointed spindle with blade anvil for grooves and hard to reach dimensions Protected to IP54 specifications Large LCD display, 8.5mm Automatic switch off Hardened steel measuring face Absolute /25mm include standard