|
|
-
4.0 of 5.0 with 21 Reviews
SALE PRICE: $829.05 26% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-261
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 468-261
|
The Mitutoyo Digimatic 468 series Holtest LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm). It also has Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are made of hardened steel and TiN-coated for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, ...
-
4.0 of 5.0 with 19 Reviews
SALE PRICE: $848.00
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 337-102
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 337-102
|
The Mitutoyo 337 series Digimatic tubular LCD inside micrometer includes a set of solid extension rods to help provide durability when measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm), and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquart...
-
4.0 of 5.0 with 25 Reviews
SALE PRICE: $875.07 28% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-005
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 368-005
|
The Mitutoyo 368 series Holtest vernier inside micrometer has two-point contacts for measurement of the inside dimension (ID) of small bores, and a vernier scale in inch units for taking precise ID measurements. It also has a ratchet-stop mechanism that helps provide uniform pressure for precise, repeatable measurements.The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The vernier scale is graduated to 0.001mm. The measuring faces are made of hardened steel and the micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
-
4.0 of 5.0 with 12 Reviews
SALE PRICE: $898.28 15% OFF
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-290-100-1
Manufacturer: Hexagon Metrology
Brand: Brown & Sharpe
Model: 599-290-100-1
|
The Brown & Sharpe Micromaster Intrimik Capa LCD inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores, and a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm). An electrostatic capacitance linear encoder helps ensure repeatable, precise measurement, and Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The measuring faces are made of hardened steel and may be uncoated, TiN-coated, or tungsten carbide-tipped for wear resistance, depending on the model. The micrometer includes, and is powered by, a single CR2032 lithium cell battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The co...
-
4.0 of 5.0 with 6 Reviews
SALE PRICE: $1,100.00 1% OFF
Manufacturer: Electron Microscopy Sciences
Brand: Electron Microscopy Sciences
Manufacturer: Electron Microscopy Sciences
Brand: Electron Microscopy Sciences
Dual axis linear micrometer to accurately calibrate in X & Y directions w/o rotation. For optical magnification and camera aspect ratio using single standard. Use to calibrate and check linear stage motion. Calibrated.
-
4.0 of 5.0 with 39 Reviews
SALE PRICE: $1,295.00 11% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 339-304
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 339-304
|
The Mitutoyo Digimatic tubular LCD inside micrometer includes a set of hollow, tubular extension pipes to help provide light weight with rigidity and balance shoulderswhen measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm), and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America C...
-
4.0 of 5.0 with 25 Reviews
SALE PRICE: $1,300.00 1% OFF
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 339-303
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 339-303
|
The Mitutoyo Digimatic tubular LCD inside micrometer includes a set of hollow, tubular extension pipes to help provide light weight with rigidity and balance shoulderswhen measuring inside dimensions of cylinders, rings, and parallel surfaces. It has a single-value LCD readout that displays in inch and metric units with resolution to 0.00005†(0.001mm), and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The measuring faces are carbide-tipped for wear resistance. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America C...
-
3.9 of 5.0 with 41 Reviews
SALE PRICE: $51.45 1% OFF
Manufacturer: MEDA - SUPERIOR IMPORT
Brand: Meda - Superior Import
Manufacturer: MEDA - SUPERIOR IMPORT
Brand: Meda - Superior Import
*Graduations .001" or .01mm *Caliper type jaws *Chrome-plated *Carbide measuring faces. *Ratchet stop for exact repetitive readings. *Complete with fitted case.
-
3.9 of 5.0 with 37 Reviews
SALE PRICE: $106.23
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-236-005-1
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-236-005-1
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
-
3.9 of 5.0 with 49 Reviews
SALE PRICE: $108.88 12% OFF
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-243-212-1
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-243-212-1
The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
|
|