Micrometers - Page 100

Manufacturer: JAIN SCIENTIFIC SUPPLIERS Brand: JAINCO Model: 1483

ROCKING MICROTOME CAMBRIDGE TYPE Specification: Cambridge rocking microtome is very well known and one of the best established microtomes in the world, which has given outstanding service to numerous microtomists through the years. A premium product by JAINCOLAB, India.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-334-30

Digimatic MIKE 0-1' with SPC Output.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 145-195

The Mitutoyo 145 series vernier inside micrometer has caliper-type jaws and a vernier scale in inch units for making precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.001”. A locking clamp helps hold measurements in place. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: CME Brand: CME Tools

2" - 2.50" RANGE. SELF-CENTERING 3-POINT FOR ACCURATE MEASUREMENT OF INTERNAL DIAMETERS. HIGHLY DURABLE CARBIDE-TIPPED CONTACT POINT. MEASUREMENT CAN BE TAKEN CLOSER TO THE BOTTOM OF THE BLIND BORE., AND CAN BE TAKEN INTO A DEEP HOLE WITH AN EXTENSION. RATCHET STOP PROVIDES UNIFORM MEASURING PRESSURE AND ASSURES HIGHEST READING ACCURACY. SETTING RING ACCURACY WITHIN +/-0.00002". READING: 0.0002"

Manufacturer: Starrett Brand: Starrett Model: T230XRL W/SLC

The Starrett 230XFL series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a friction thimble mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.0001”. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle and anvil have micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 395-262

The Mitutoyo 395 series LCD tube micrometer has a vertical anvil for measuring tubing wall thickness. It also has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately).The micrometer’s electronic microprocessor can hold measurement at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The spindle has a flat measuring face that is carbide-tipped for wear resistance. The vertical anvil may be a pin, spherical, or cylindrical type. The micrometer’s ratchet-stop mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufa...

Manufacturer: HHIP Brand: HHIP Model: 4200-0206

1-2" Indicating Micrometer .00005" Graduation Carbide tipped measuring faces. Jewel LED bearings. Retracting button. Tolerance hands. Easy zero adjustment. with fitted case. Standard included.

Manufacturer: Fowler Brand: Fowler

Package Includes: Fowler Electronic Micrometer Carrying Case Features Automatic switch off Absolute measuring system Friction thimble Large 4-way reading LCD display Direct RS232 output Carbide measuring faces Resolution: .00005 /.001mm

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 342-371-30

Mitutoyo 342-371-30 Chm-.8"MX, Micrometer, Crimp Height, 0-.8",.00005"/0.001 mm, IP65.

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E08

Three points internal micrometer, 65- 8 inch graduation 0002 inch.