Micrometers - Page 96

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage LCD IP54-rated outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement. The micrometer’s electronic microprocessor can set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer’s knurled ratchet thimble mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 153-206

The Mitutoyo 153 series micrometer head has a vernier scale in inch units for taking precise measurements and a non-rotating spindle that helps prevent wear and deformation on the workpiece. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.001” or 0.0001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 139-006

The Mitutoyo 139 series tubular vernier inside micrometer has a vernier scale in inch units for taking precise inside dimension (ID) measurements of the inside dimensions of cylinders, rings, and parallel surfaces. It may also be used with interchangeable extension pipes for a diversified range of measurement (sold separately). The vernier scale is graudated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The micrometer head has a travel of 0.5” or 1” per revolution depending on the model. A knurled ring-type lock nut helps hold measurements in place. The micrometer and accessories come with a wooden case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 152-402

The Mitutoyo 152 series micrometer head has a large-diameter thimble for fine positioning and ease of reading and either an anti-rotation device on the spindle or a spherical measuring face for use as an XY-stage feed. The vernier scale has graduations in metric units for taking precise measurements, and a white anodized aluminum rust- and glare-resistant finish. Models with an anti-rotation device have bidirectional graduations to 0.005mm, a hardened steel measuring face for durability, and a floating thimble mechanism for adjustable zero-setting to help provide accuracy. Models with a spherical measuring face are graduated to 0.001mm, have a carbide-tipped measuring face for wear resistance, and an adjustable spindle for zero-setting. The micrometer head has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The measuring face is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-224-103-0

Fowler 52-224-103-0 inch digit micrometer set has a 0 to 3" measuring range and a flat anvil/spindle pair with a 0.256" diameter measuring face for general purpose measuring. The digit display has 0.001" graduation intervals and the secondary vernier scale has 0.0001" graduation intervals and an overall accuracy of 0.00016" (0-1” unit) for precise readings. Microfine graduations on satin chrome finish provide clear readings, and the positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00005" parallelism on 0 to 1" micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The grey baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction providing for accurate measurements. The set includes 0 to 1", 1 to 2" and 2 to 3”, 1" and 2" standards, a spanner wrench, and a fitted case. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically u...

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage LCD IP54-rated outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement. The micrometer’s electronic microprocessor can set a temporary zero position, and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. The electronics housing has an Ingress Protection 54 (IP54) rating, which means that components are resistant to debris and to splashing water from any direction up to a volume of 10 liters per minute. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. The micrometer’s knurled ratchet thimble mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: L.S. Starrett Brand: L.S. Starrett

End Measuring Rod is used for checking and setting micrometers of 2 capacity and larger. Also use on machine tools for comparing gages, checking precision measuring tools, and measuring parallel surfaces. Insulated handles minimize expansion by heat when held in the hand. This listing is for each. Technical Specification Item End Measuring Rod w/Grip Dia. 11mm Range 500mm For Use With 525mm Micrometers, Includes Insulating Rubber Handle

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 151-226

The Mitutoyo 151 series micrometer head has a wide 8mm-diameter spindle for heavy-duty use and a vernier scale in metric units for taking precise measurements. It is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The vernier scale is graduated to 0.01mm or 0.001mm depending on the model, and has a satin chrome rust- and glare-resistant finish. The flat measuring face is carbide-tipped for wear resistance and is lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 3011-4051

2-20'' Inside Micrometers Sets 0.001'' Increments, #3011-4051 The combining of extension rods provides a wide measuring range Supplied with a standard caliper gage for zero setting Carbide measuring faces Diameter of extension rods:φ15.5mm Resolutions: 0.001'' Use to measure 3 flute cutting heads such as end mills, taps and reamers Carbide V surface Nice fitted case Range: 2-20'', Extension rods: 0.5'', 1'', 2'' (2pcs), 4'', 8''

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: MD71-0005