Micrometers - Page 108

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2312-4010

Range: 3-4"/75-100mm Resolution: 0.001mm.(0.00005") Accuracy: ±0.003mm mm/inch conversion. ABS/INC switchable. Reset/Pre-set. Hold function. Hold function for max. or min. values. Non-rotating spindle. Blade penetration = 0.315" Blade thickness = 0.03" Blade width = 0.256"

Manufacturer: Starrett Brand: Starrett Model: T436.1XFL-3

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: INSIZE Brand: INSIZE Model: 3206-100A

Outside micrometer with interchangeable anvils, 0-100mm, graduation 0.01mm.

Manufacturer: Fowler Brand: Fowler

Fowler XT RING .100 54-332-004-0

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: #AC21-1022-2022-3022

Battery used is button cell LR44 or SR44 (1.5V) •Large Display •Auto On and Off capabilities •Absolute, floating zero, and relative measurements -(you can zero out at any point) •Including Item Range Qty AC21-1022 0-25mm/0-1" 1 AC21-2022 25-50mm/1-2" 1 AC21-3022 50-75mm/2-3" 1

Manufacturer: Starrett Brand: Starrett Model: T436.1XFL-4

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a tapered frame for measuring narrow slots and tight places, and a knurled friction thimble that helps provide quick adjustment capability. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: CME Brand: CME Tools

1.0" - 1.2" RANGE. SELF-CENTERING 3-POINT FOR ACCURATE MEASUREMENT OF INTERNAL DIAMETERS. HIGHLY DURABLE CARBIDE-TIPPED CONTACT POINT. MEASUREMENT CAN BE TAKEN CLOSER TO THE BOTTOM OF THE BLIND BORE., AND CAN BE TAKEN INTO A DEEP HOLE WITH AN EXTENSION. RATCHET STOP PROVIDES UNIFORM MEASURING PRESSURE AND ASSURES HIGHEST READING ACCURACY. SETTING RING ACCURACY WITHIN +/-0.00002". READING: 0.0002"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 103-225

The Mitutoyo 103 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism for uniform pressure during adjustment. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: T63RL

The Starrett 63 series long range micrometer head has long spindle travel, and a vernier scale in inch units for taking precise measurements to 2”. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001” or 0.0001” depending on the model, and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Moore and Wright Brand: Moore & Wright