Micrometers - Page 110

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-233

The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in metric units with resolution to 0.001mm for outside diameter (OD) measurement, and a ratchet-stop mechanism that helps provide precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. On some models, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, wh...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 342-251-30

The Mitutoyo 342 series LCD point micrometer has a pointed spindle and anvil for measuring grooves and keyways, and an LCD digital readout that displays in metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement. It has a ratchet-stop mechanism for uniform pressure during adjustment, and Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. The micrometer has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet. The frame is made of high-grade tool steel, and the spindle and anvil have carbide-tipped faces. A spindle lock helps provide secure locking of the measurement position. The unit comes with an SR44 battery and a fitted plastic case. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo Amer...

Manufacturer: INSIZE Brand: INSIZE Model: 3227-E065

Three points internal micrometer, 5- 65 inch graduation 0002 inch.

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MEB-MW210-02DDL

Founded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineers tools.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 331-251-30

Mitutoyo 331-251-30 SPM-25MX, Micrometer, Spline, 10 mm Spline, 0-25 mm, 0.001 mm, IP65.

Manufacturer: INSIZE Brand: INSIZE Model: 3520-30E

Electronic inside micrometer, 2-1 2 inch 5-30mm.

Manufacturer: Starrett Brand: Starrett Model: 700MB

The Starrett 700M series internal groove vernier inside micrometer has caliper-type jaws and a vernier scale in inch units for taking precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel, with hardened and ground jaws for accuracy. A knurled friction thimble helps provide quick adjustment capability. The vernier scale is graduated to 0.01mm and a locking clamp helps hold measurements in place. The micrometer has a satin chrome rust- and glare-resistant finish.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Model: 0912

0-12'' x 0.0001'', 12 Pcs/Set Ultra-Precision Outside Micrometers Set, #EG00-0912 Crisp, clear, easy-to-read graduation, accurate to 0.0001'' Hardened and ground spindle with carbide anvil ensure durability and accuracy Super Hard Carbide Tipped Complete with calibration standards and wrenches Ratchet handle for precise application of force Lock nut Powder coated baked finish Fitted wood padded case included! Vernier Graduations: 0.0001'' Includes 12 Micrometers with measuring ranges: 0-1'', 1-2'', 2-3'', 3-4'', 4-5'', 5-6'', 6-7'', 7-8'', 8-9'', 9-10'', 10-11'', and 11-12'' Includes wood case, adjustment wrench and calibration standards

Manufacturer: Hexagon Metrology Brand: Standard Gage

The Standard Gage three-point vernier inside micrometer has three-point contacts for self-centering measurement of the inside dimension (ID) of bores and a vernier scale in inch units for making precise measurements. The micrometer includes an extension rod for access to deep bores, and a setting ring. The micrometer and accessories have a satin chrome rust- and glare-resistant finish. The contact faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.0001” or 0.0002” depending on the model. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 3011-6051