Micrometers - Page 143

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-234-1

The Brown & Sharpe outside spline micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and a small-diameter, 0.12” anvil and spindle for measuring splined shafts, slots, and keyways.The micrometer’s high-grade tool steel frame has a black enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The spindle and anvils are made of hardened steel for durability, and are lapped to help provide accuracy. The ratchet mechanism can be disabled for variable adjustment control. A spindle lock helps provide secure locking of the measurement position. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 762XFL

The Starrett digital micrometer head has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm), a vernier scale graduated in inch units, and a knurled ring-type lock nut to hold measurements in place. It has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The micrometer has a flat measuring face for measurement or use as a stop, and is carbide-tipped for wear resistance and micro-lapped to help provide accuracy. The micrometer is available with a non-rotating spindle to help prevent wear on the workpiece.The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. It also has a preset to install a reading at any position. The micrometer has Statistical Process Control (SPC) data output to transmit results to a computer or external device. The output jack transmits SPC results to a computer through an interface cable (sold separately). The micrometer includes, and is powered by, a single CR2450 lithium cell battery.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 133-148

The Mitutoyo 133 series tubular vernier inside micrometer has a vernier scale in metric units for taking precise inside dimension (ID) measurements of the inside of cylinders, rings, and parallel surfaces. The micrometer head sleeve rotates to adjust the zero point to help provide accuracy. A locking clamp helps hold measurements in place. The vernier scale is graduated to 0.01mm, and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: iGaging Brand: iGaging

Disc Micrometers simplify measuring thickness of difficult, closely spaced sections, ribs, keys, fins, cutting edges on forming tools, chordal thickness of gear teeth and more. The extra large diameter disc will enter normally inaccessible places such as narrow grooves, slots and recesses.iGaging 0-1" Digital Quick Micrometer Absolute Origin SpeedMic Snap Lever Action GageiGaging Absolute Origin SpeedMic uses the absolute encoding technology in which the sensor memorizes and traces an absolute origin zero position.Quickly measure with super high precisionLever activated - Fully Opens and Closes In Less Than One Second! linear moving sensor provides accurate and reliable measurementsIP65 coolant proofMeasuring Range: 0-1"/0-25mm Carbide tipped spindle Resolution: 0.00005"/0.001mmAccuracy: ±0.00015"/0.003mmFixed Thimble. SPC/USB data output available (not included) Search Amazon for item: B00INL0BA2. Ball Attachment Included. Case included 2 Years warranty

Manufacturer: Starrett Brand: Starrett Model: 262RL

The Starrett 262 series long range micrometer head has a non-rotating spindle that helps prevent wear to the workpiece, and a vernier scale in inch units for taking precise measurements to 1”. It also has a knurled ring-type lock nut to hold measurements in place. The micrometer has a plain stem for mounting in a fixture with a split-body clamp or setscrew. The vernier scale is graduated to 0.001”, and has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 125-104

The Mitutoyo 125 series screw thread micrometer has a 60-degree V-anvil and conical spindle for measuring pitch diameters of metric or unified screw threads. It also has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment.sThe micrometer’s frame has a Hammertone, baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.01mm, and a satin chrome rust- and glare-resistant finish. The micrometer’s ratchet-stop mechanism helps provide uniform pressure during adjustment for precise, repeatable measurement. A spindle lock helps provide secure locking of the measurement position, while the anvil holder has a fine screw adjustment and locking device. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fowler Brand: Fowler

Features Non-rotating spindle Direct inch metric conversion ABS/INC measuring mode Tolerance & preset function Comes complete with 7 anvil sets Satin chrome finish Includes case The Fowler Universal Anvil Micrometer accepts 7 pairs of individual anvils making it possible to gage a variety of dimensions unacheivable with a single micrometer.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 145-194

The Mitutoyo 145 series vernier inside micrometer has caliper-type jaws and a vernier scale in inch units for making precise inside dimension (ID) measurements. The micrometer is made of high-grade tool steel for durability and has a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.001”. A locking clamp helps hold measurements in place. The micrometer comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-246-124-0

The Fowler 52-246 series outside micrometer has a digit display with a choice of measuring range, 0.00001" graduations, and a blade-style anvil/spindle pair to measure groove diameters of shafts and workpieces with narrow or recessed features. The digit display has 0.0001" graduations and an accuracy of 0.0002" on 1" and 2" models for precise readings and accurate measurements. The positive locking lever on the spindle locks measurements in place for accurate readings. A non-rotating spindle keeps workpieces stable during measurements. Hardened, ground, and micro-lapped measuring faces provide wear resistance. The hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life. A friction thimble applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. SpecificationsDisplay type Digit Anvil/spindle style Blade Measuring range Varies Graduation interval 0.0001" Accuracy 0.0002" on 1" and 2" micrometers Thimble style Friction Blade thickness 0.30" Blade width 0.235" Blade penetration 0.255" Total anvil length including blade 0.600"Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred V. Fowler Company manufactures inspection and measurement instrumen...

Manufacturer: Starrett Brand: Starrett Model: 124MAZ

The Starrett 124MAZ solid-rod inside micrometer set offers a range from 50 mm to 200 mm, is graduated at 0.01 mm intervals, and comes in a protective vinyl-and-steel case. The hardened, radius-ground anvils on rods are accurate. Solid-rod inside micrometers are often used for measuring the inside diameter of a cylinder or ring and when measuring parallel surfaces. The micrometer head, rods, and spacing collars are assembled to the desired range and then adjusted to obtain the measurement. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.