Micrometers - Page 44

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: MD71

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-815-003-2

The Fowler 54-815 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016" provide precise readings and accurate measurements. Carbide measuring faces provide wear resistance. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The steel construction housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording and can be set to zero at any spindle location. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. A built-in clock logs the time measurements are taken and an automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016"Thimble styleRatchetData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outsi...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-815-003-2

The Fowler 54-815 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016" provide precise readings and accurate measurements. Carbide measuring faces provide wear resistance. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The steel construction housing provides durability and is Ingress Protection (IP) certified IP54 for protection against dust and water. The LCD has a hold feature that saves the reading for recording and can be set to zero at any spindle location. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. A built-in clock logs the time measurements are taken and an automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016"Thimble styleRatchetData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outsi...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 117-102

The Mitutoyo 117 series Uni-Mike micrometer uses interchangeable anvils to support varied outside dimension (OD) measurement needs, and includes a flat and rod anvil. It has a vernier scale in metric units for taking precise outside diameter (OD) measurements, and a ratchet-stop mechanism to help provide uniform pressure for precise, repeatable measurement during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.01mm with a satin chrome rust- and glare-resistant finish. The spindle is carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: ASIMETO Brand: ASIMETO Model: 105-03-5

Carbide tipped, IP65 Digital Micrometers & Sets, ASIMETO

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 118-112

The Mitutoyo 118 series sheet metal micrometer has a deep-throated frame for measuring thickness of sheet metal, paper, plastic, or rubber parts, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001” or 0.0001”, depending on the model, with a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer comes with a plastic case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Fowler Brand: Fowler

Features 30 pointed anvil and spindle for measuring small grooves, keyways, small flutes and hard to reach dimensions Protected to IP54 specifications Large LCD Display, 8.5mm Automatic switch off Carbide measuring faces Absolute /25mm include standard

Manufacturer: Starrett Brand: Starrett Model: T230RL

The Starrett 230FL series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a friction thimble mechanism for uniform pressure during adjustment. The vernier scale on the thimble and sleeve is graduated to 0.0001”. The micrometer is made of high-grade tool steel with a satin chrome rust- and glare-resistant finish. The spindle and anvil have micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 141-103

The Mitutoyo 141 series vernier inside micrometer includes a set of interchangeable rods for a diversified range of measurement, and has a vernier scale in metric units for making precise inside diameter (ID) measurements. The micrometer and rods have a satin chrome rust- and glare-resistant finish. The measuring faces are carbide-tipped for wear resistance. The vernier scale is graduated to 0.01mm. A locking clamp helps hold measurements in place. The micrometer and accessories come with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Starrett Brand: Starrett Model: 795SCKB

Smart Cable Keyboard - Starrett 795 - Starrett SmartCable™ makes it fast and easy to connect a measuring tool to a PC. The interface provides the ability to connect through USB keyboard outputs. With the SmartCable keyboard output, no software wedge or other intermediary software is required. The PC “sees” the connection from the SmartCable™ as a keyboard. Simply, open any document on your computer that accepts input, position your cursor, then send the data from the tool. That data will be input at the cursor location.