Micrometers - Page 87

Manufacturer: Starrett Brand: Starrett Model: 363FL

The Starrett 363 series digital micrometer head has a mechanical digit counter in inch units for ease of reading to 0.001”, and a knurled ring-type lock nut to hold measurements in place. The micrometer is available with a plain stem for mounting in a fixture with a split-body clamp or setscrew, or a clamp-nut stem for quick mounting. The micrometer has a satin chrome rust- and glare-resistant finish. The spindle is made of hardened steel to help provide durability, with a flat measuring face suitable for measurement or use as a stop, and is micro-lapped to help provide accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot. Micrometer heads are for mounting in fixtures, where they are typically used for measurement, or as stops or feeds.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Ohaus Brand: Ohaus

Accurate and dependable, the original OHAUS Triple Beam balance has been the standard in science classrooms for decades.  Whether you’re weighing solids, liquids, powders or even animals, an OHAUS Triple Beam balance is well equipped to handle the job.  These balances offer the accuracy and convenience of a toploading balance while allowing students to gain hands-on experience through manipulation of the poises and attachment weights (sold separately), as well as to visualize mass measurement principles. The 700 Series accommodates a range of laboratory and education applications. Some models have a tare beam to allow containers up to 225g to be balanced out, and a variety of weighing platforms are also available. The OHAUS Dial-O-Gram® Series combines the convenience of direct-reading dial calibration with the speed of magnetic damping for a balance that accurately and quickly weighs everything.

Manufacturer: Starrett Brand: Starrett Model: 796XRL-1

The Starrett 795XRL series LCD outside micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution to 0.00005” (0.001mm) for outside diameter (OD) measurement, and a vernier scale in inch units for taking precise outside diameter (OD) measurements. The micrometer has an Ingress Protection 67 (IP67) rating, which means that components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes.The micrometer’s electronic microprocessor can preset, hold, or limit measurement at any position, as well as set a temporary zero position and return to a true zero reading. An automatic off function helps preserve battery life when the unit is not in use. Depending on the model, it may have Statistical Process Control (SPC) data output to transmit results to a computer or external device through an interface cable (sold separately).The micrometer’s frame has a black wrinkle finish that helps resist rust and reduce glare. A ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. The vernier scale on the thimble and sleeve has a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped measuring faces for accuracy and are carbide-tipped for wear resistance. A knurled ring-type lock nut helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single CR2032 lithium cell battery. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are ty...

Manufacturer: Starrett Brand: Starrett Model: 208Z

The Starrett 208 series can seam micrometer has a vernier scale in inch units for taking measurements of the width, height and depth of can seams. The micrometer is made of stainless steel for durability, with a satin chrome rust- and glare-resistant finish, and a knurled sleeve that helps provide a secure grip. The vernier scale on the thimble and sleeve is graduated to 0.001” for taking precise outside diameter (OD) measurements. Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 293-349

The Mitutoyo 293 series Coolant Proof LCD micrometer has a digital single-value LCD readout that displays in inch and metric units with resolution 0.00005” (0.001mm), and a ratchet thimble mechanism that helps provide precise, repeatable measurement. The micrometer’s electronic microprocessor can hold measurements at any position, convert to absolute value, set a temporary zero position, and return to a true zero reading. On some models, an output jack transmits Statistical Process Control (SPC) data results to a computer or external device through an interface cable (sold separately). The electronics housing has an Ingress Protection 65 (IP65) rating, which means that components are resistant to penetration by dust and debris, and resistant to penetration by liquids and coolant up to the force of a low-pressure (to 30 kilonewtons/meter-squared) water jet.. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position. The micrometer includes, and is powered by, a single SR44 silver oxide battery, and comes with a fitted case for storage.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headq...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-1-34

The Brown & Sharpe enamel frame outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, a convertible friction drive thimble mechanism for uniform or variable pressure during adjustment, and tungsten carbide faces for wear resistance.The micrometer’s frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.0001” with conventional straight markings, and has a satin chrome rust- and glare-resistant finish. The ratchet mechanism can be disabled for variable adjustment control. The spindle and anvil have flat measuring faces and are carbide-tipped for wear resistance. A spindle lock helps provide secure locking of the measurement position.< /p>Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001, and is headquartered in North Kingstown, RI.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 2312-5010

Manufacturer: INSIZE Brand: INSIZE Model: 3229-18

Tubular inside micrometer, 17-18", graduation 001".

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-401-206-0

The Fowler 52-401 series outside micrometer has a choice of measuring range and flat anvil/spindle pairs with interchangeable anvils to provide a wide measuring range. The digit scale has 0.0001" graduations and an accuracy of 0.0003" on 0 to 6" micrometers or 0.0004" on 6 to 12" micrometers. Carbide-tipped anvils provide wear resistance and are fitted with an adjusting collar to set the overall dimension. The spindle thread is hardened, ground, and micro-lapped to provide smooth movement, accuracy, and long life. The positive locking lever on the spindle locks measurements in place for accurate readings. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The heat-insulated steel frame helps reduce temperature-related expansion or contraction providing accurate measurements. Each micrometer includes a set of inter­changeable anvils to adjust accurately the micrometer for the required range, a wrench, and a fitted case. SpecificationsDisplay typeDigit displayAnvil/spindle styleFlatMeasuring rangeVariesGraduation interval0.0001"Accuracy0.0003" for 0 to 6" micrometers, 0.0004" for 6 to 12" micrometersThimble styleFrictionMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The Fred...

Manufacturer: Starrett Brand: Starrett Model: 436.1P-3

The Starrett 436.1 series outside micrometer has a vernier scale in inch units for taking precise outside diameter (OD) measurements, and a tapered frame for measuring narrow slots and tight places. The micrometer’s steel frame has a baked enamel finish for protection and durability. The vernier scale on the thimble and sleeve is graduated to 0.001”, with a satin chrome rust- and glare-resistant finish. The spindle and anvil have flat, micro-lapped steel measuring faces for accuracy.Micrometers are precision measuring instruments that use a calibrated screw to measure small distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micrometer: outside, inside, and depth. Outside micrometers may also be called micrometer calipers, and are used to measure the length, width, or outside diameter of an object. Inside micrometers are typically used to measure interior diameter, as in a hole. Depth micrometers measure the height, or depth, of any shape that has a step, groove, or slot.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.