Electronic Indicators - Page 13

Manufacturer: INSIZE Brand: INSIZE Model: 2112-251E

Electronic indicator, 1"/25.4mm, resolution 00005" 0/001mm.

Manufacturer: INSIZE Brand: INSIZE Model: 2115-101E

Waterproof electronic indicator, 5 inch 12 7mm resolution 00005 inch 0/001mm.

Manufacturer: HHIP Brand: HHIP Model: 4400-1500

0-0.5/0-12.7mm Electronic Indicator with .00005/.001mm Resolution ~ 0-0.5/0-12.7mm Electronic Indicator with .00005/.001mm Resolution ~ True inch/mm conversion. ~ Accuracy is 0.0002/0.005mm. ~ 7 Keys: On/Off, Dir, Inch/mm, Tol., Set, ABS, & Range ~ Easy adjusting for standard or reverse reading. ~ Flat back. ~ Stem Diameter is 8mm. ~ Button battery is an SR44/1.5V. ~ Supplied in fitted case.

Manufacturer: Starrett Brand: Starrett Model: R2762-0M

These displays with probes will make absolute, incremental and/or comparative measurements and implement all the features of Wisdom Plus Indicators. System is suitable for any stand-alone gaging application.

Manufacturer: Fowler Brand: Fowler Model: Indi-Max

Indi-Max 0.5"/12.5mm IP54 Electronic Indicator Features: Direct Inch/Metric Conversion IP54 Coolant dial face 3/8 stem - 4-48 thread Resolution .00005 /.001mm Accuracy: .00016 /.004mm (to 1 ) Tolerance indicators Absolute/incremental reading Lugback Floating zero Carbide tipped point

Manufacturer: Starrett Brand: Starrett Model: F2740-4M

The Starrett F2740-1M metric Wisdom Plus Electronic Indicator has a resolution of 0.02 mm, accuracy of + or - 2 resolutions, and a total measurement range of 0 - 50 mm. The digital display has a sealed housing with a glass scale design, minimum, maximum, and last read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The display flashes when user-defined tolerances are exceeded, and the total indicator reading (TIR) capability displays the absolute difference between the highest and lowest readings. The 5-3/4” (146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4” (6-mm) diameter hole, and an output jack that allows for data transmission to PC compatible RS-232C (serial port) supported devices. Manufactured to American Gage Design (AGD) standards, the indicator can be powered from any of three sources: 110V AC adaptor, rechargeable zinc-air batteries, or through the data port. An auto-off feature turns the indicator off after 10 minutes of nonuse. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L.S. Starrett Comp...

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Electronic Digital Indicator Series 543 Resolution .0005/0.01mm Accuracy .0008 Range 1 / 25.4mm Long Form Calibration Certificate Yes Features With SPC Data Output Includes Certificate Of Calibration Traceable To NIST, Battery This listing is for each.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-576

The Mitutoyo 543-576 Absolute Digimatic electronic indicator gauge, ID-N body, is for measuring short, linear distances in harsh workshop conditions. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a selectable resolution of either 0.00005" (0.001mm) or 0.0005" (0.01mm), and an accuracy of + or - 0.00012" (0.003mm). The LCD displays in both inches and metric units, and can be rotated 180 degrees for taking measurements from different directions. The body is 35mm wide and can be used in locations where space is restricted. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for taking accurate measurements. This model is Ingress Protection certified IP66 for protection against dust and water jets.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions include zero set, preset, direction switching, tolerance judgment, hold, and alerts for low voltage, counting value composition error, overflow error, and tolerance limit setting error. This indicator gauge has a measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 7,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)ResolutionSelectable: 0.00005" (0.001mm) or 0.0005" (0.01mm)Accuracy+ or - 0.00012" (0.003mm)Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, face can be rotated 180 degreesData outputYesDimensions128.5 x 35 x 25mm (H x W x D)Shipping weight0.53lb.StandardsIP66Power sourceSR-44 battery (included)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Dial indicators are also called dial gauges, probe, and electronic indicators....

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Electronic Digital Indicator Series 543 Resolution .00005/0.001mm Accuracy .00012 Range 0.500/12.7mm Features With SPC Data Output Includes Battery Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-280

Accuracy: Refer to the list of specifications. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Data output (-NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-set/Preset, Zeroset, GO/+/-NG judgment, Max/Min/ Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only). Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error. Measuring force: 2.0N or less.