Electronic Indicators - Page 4

Manufacturer: VCC Optoelectronics Brand: VCC Optoelectronics Model: L79D-G125-W

80 mcd (Typ.) Luminous Intensity, Threaded LED Indicator Light The L79 Series LED indicators are constructed with a threaded housing with a built-in reflector. Each unit has a high brightness diffused LED, two-color-coded 6" wire leads. 125 VAC unit has bipolar LED and two 6" white wire leads. Lights mount into a 5⁄16" diameter mounting hole with a maximum panel thickness of 0.250". A hex nut and lockwasher are supplied. Current: 20 mA typical. Clear LEDs, 2 V and 6 V and other colors are available. Watertight

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 611H-1348

Manufacturer: INSIZE Brand: INSIZE Model: 2114-5FE

Compact electronic indicator, 2 inch 5mm resolution 0005 inch 0/01mm.

Manufacturer: Advanced Systems & Designs Brand: Advanced Systems & Designs

Using a high quality 7-pin connector, this Advanced Systems & Designs gage cable connects the Mahr Federal uMaxum / uMaxum XL digital indicator to a Digimatic 10-pin output. This gage cable is designed to work with the Advanced Systems & Designs GageMux® or other similar digimatic input devices. The cable is directly connected to the GageMux® or other devices that recognize the Mitutoyo digimatic signal and does not require power from the gage. The data transfer can be triggered using any of the following methods: • Using the data send button on the gage, if it has one • Using the Footswitch on the GageMux® (or equivalent triggering method on similar devices • Sending a gage read command from the computer to the GageMux®. NOTE: See our part number 600-124-MTI for the 4-pin Mahr Federal uMaxum II gage cable. Can ship only within the United States.

Manufacturer: INSIZE Brand: INSIZE Model: 2104-10E

Electronic indicator, 5 inch 12 7mm resolution 0005 inch 0/01mm.

Manufacturer: iGaging Brand: iGaging

iGaging ABSOLUTE Technology IndicatorThe iGaging digital electronic indicator with ABSOLUTE encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on. Features:Full Size remote display.SPC/USB Data PortABSOLUTE encoder technology - Unlimited measuring speed.IP65 ProtectionRead and convert Inch/mm displayOrigin setPreset valueShank diameter: 3/8"Carbide tip4-48 threaded tipFloating lug back2 Years warrantySpecifications:Range: 2"/100mmResolution: 0.00005"/0.001mmAccuracy: 0.0002"

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4336010 Color: Black

The Mahr Federal 1075R REFERENCE Digital electronic indicator gauge, is a digital indicator for measuring short, linear distances in machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm) and a resolution of 0.0005"/0.01mm. The Large crisp LCD displays measurements in inches and metric units. The Digital Indicators 1075 R are equipped with the innovative Reference-System. The zero position only has to be set one time: once it is set, the zero remains stored for all further measurements. Therefore, when the indicator is switched ON or the measuring spindle is moved the indicator is immediately ready for measurement. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB HubThe Digital Indicator 1087 R is equipped with a LOCK function. With this key lock the zero position is secured and operating error is avoided. The face of the indicator is fixed for easy reading in bench or fixture gages. This unit has a 8mm diameter stem and a 2.5m contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. The 1075R is Ingress Protection certified IP52 for protection dirt and dripping water. Additional functions for this indicator include ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (for entering a numerical value), DATA (data transmission with a data connection cable), LOCK-Function: Individual buttons can be locked. The measuring force is 1 Newton (N) or less. It has a battery life of nearly 3 years of normal use. This unit comes with a CR 2032 battery.

Manufacturer: Avery Weigh-Tronix, LLC Brand: Brecknell Model: MODEL SBI 100

The SBI 100 indicator is a low cost, simple to operate weight indicator designed for use in a wide range of applications. Compatible with the complete range of Brecknell platform scales the SBI 100 can be connected to any platform with a maximum of four 350 ohm load cells for use in non-trade applications

Manufacturer: iGaging Brand: iGaging

iGaging ABSOLUTE Technology IndicatorThe iGaging digital electronic indicator with ABSOLUTE encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on. Features:Full Size remote display.SPC/USB Data PortABSOLUTE encoder technology - Unlimited measuring speed.IP65 ProtectionRead and convert Inch/mm displayOrigin setPreset valueShank diameter: 3/8"Carbide tip4-48 threaded tipFloating lug back2 Years warrantySpecifications:Range: 4"/200mmResolution: 0.00005"/0.001mmAccuracy: 0.0003"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-404

Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).