Electronic Indicators - Page 6

Manufacturer: INSIZE Brand: INSIZE Model: 2113-101E

No Auto power off electronic indicator, 5 inch 12 7mm resolution 00005 inch 0/001mm.

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4336030 Color: Black

The Mahr Federal 1075R REFERENCE Digital electronic indicator gauge, is a digital indicator for measuring short, linear distances in machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm) and a resolution of 0.0005"/0.01mm. The Large crisp LCD displays measurements in inches and metric units. The Digital Indicators 1075 R are equipped with the innovative Reference-System. The zero position only has to be set one time: once it is set, the zero remains stored for all further measurements. Therefore, when the indicator is switched ON or the measuring spindle is moved the indicator is immediately ready for measurement. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB HubThe Digital Indicator 1087 R is equipped with a LOCK function. With this key lock the zero position is secured and operating error is avoided. The face of the indicator is fixed for easy reading in bench or fixture gages. This unit has a 8mm diameter stem and a 2.5m contact point thread mount. It has a flat back for stem mounting or plate mounting on the rear of the indicator. The 1075R is Ingress Protection certified IP52 for protection dirt and dripping water. Additional functions for this indicator include ON/OFF, RESET (Set display to zero), mm/inch, Reversal of counting direction, PRESET (for entering a numerical value), DATA (data transmission with a data connection cable), LOCK-Function: Individual buttons can be locked. The measuring force is 1 Newton (N) or less. It has a battery life of nearly 3 years of normal use. This unit comes with a CR 2032 battery.

Manufacturer: Starrett Brand: Starrett Model: F2740-3

The Starrett F2740-3 Wisdom Plus Electronic Indicator has four user-selectable resolutions with a maximum resolution of 0.0005” (0.01 mm), accuracy of + or - 2 resolutions, and a total measurement range of 0” - 2” (0 - 50 mm). The digital display has a sealed housing with a glass scale design, minimum, maximum, and last read hold, and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The display flashes when user-defined tolerances are exceeded, and the total indicator reading (TIR) capability displays the absolute difference between the highest and lowest readings. The 5-3/4” (146-mm) rectangular housing has a rotating bezel, a rear mounting bracket with a 1/4” (6-mm) diameter hole, and an output jack that allows for data transmission to PC compatible RS-232C (serial port) supported devices. Manufactured to American Gage Design (AGD) standards, the indicator can be powered from any of three sources: 110V AC adaptor, rechargeable zinc-air batteries, or through the data port. An auto-off feature turns the indicator off after 10 minutes of nonuse. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-796BCAL

The calibrated Mitutoyo 543-796BCAL Absolute Digimatic digital indicator gauge, ID-S series, is for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications. It has a measurement range of 0 to 0.5" (0 to 12.7mm), a resolution of 0.00005" (0.001mm), and an accuracy of + or – 0.00012". The LCD displays in both inches and metric units. This model has a flat back for stem mounting or plate mounting on the rear of the indicator. An Absolute electrostatic capacitance linear encoder helps prevent overspeed errors for accurate measurements. This model is Ingress Protection certified IP53 for protection against dust and spraying water. Mitutoyo calibrated tools include a Certificate of Calibration that provides evidence that the tool has been calibrated and is within allowable error specifications. Mitutoyo calibrated tools are certified by Mitutoyo's American Association for Laboratory Accreditation-accredited calibration laboratory (A2LA Certificate #750-01) to the International Organization for Standardization/International Electrotechnical Commission (ISO/IEC) 17025 International Standard for testing and calibration laboratories.This unit has a 3/8" diameter stem and a #4-48 UNF contact point thread mount. Additional functions for this indicator include origin set, zero set, counting direction switching, and alerts for low voltage, counting value composition error, and overflow error. The measuring force is 2.5 Newtons (N) or less. It has a battery life of approximately 20,000 hours of normal use. This unit comes with an SR-44 battery. This gauge offers serial data output (using optional SPC cables, sold separately), which increases speed and reliability of digital measurement records.SpecificationsRange0 to 0.5" (0 to 12.7mm)Resolution0.00005" (0.001mm)Accuracy+ or – 0.00012"Measuring force2.5N or lessStem4-48UNF contact point thread mount with 3/8" diameter spindleFaceLCD displays in both inches and metric units, with flat backData outputYesDimensions103.9 ...

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1900C-2

NOSHOK Series 1900 compact digital indicator provide digital display of any desired unit of pressure, temperature, level, force or flow measurement. Their 3-1/2" digit display has a span range of 0 to 1999 and is available in a positive image reflective LCD or in an optional back-lit version. They are housed in a compact, lightweight, impact resistant plastic case with a clear viewing lens. The sealed front panel installation also meets NEMA 4x/IP65 specifications for wash down and dusty environments, when properly installed. 4mA to 20mA or 10mA to 50mA Input signal. 160 ohms max at 20mA; 60 ohms max at 50mA Input impedance. 100mA Maximum input current. 0 to 1999 Span range, -1999 to 1999 Offset range. +/-0.1 percent to 1 digit. 2.5 Readings per second, nominal Reading rate. 1.5 seconds to settle for a step change Response time. -40 to 175 degree F Storage temperature. 32 to 140 degree F Operating temperature. CE compliant to EMC norm EN 61326:1997/A1:1998 RFI, EMI and ESD protection. Fits DIN standard cut-out 2.68" x 1.30". Compact, lightweight, impact-resistant NEMA 4X, IP65 housing with sealed front bezel.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 1800-0

The Model 1800 attachable loop-powered digital indicator can be fitted to NOSHOK pressure transmitters utilizing a 4mA to 20mA output signal and the Hirschmann (DIN 43650A) connector. It is simply inserted between the transmitter body and the connector. The indicator is programmable to display a range of -1999 to 9999, and it may be tilted for better viewing. Also, there is user selectable digital filtering to improve readability in rapidly varying pressure applications. All parameters are stored in non-volatile memory so that reprogramming is not necessary in the event of a power failure. Applicable for hydraulic and pneumatic systems, pumps and compressors, test equipment and systems, industrial machinery and machine tools, HVAC systems power generation water and wastewater stamping and forming presses. 4 digit 0.4" liquid crystal display. +/-0.2 percent Full Scale, +/-1 digit. 5 times/second Update rate. Digital, field selectable .2, .5, 1 or 1.5 seconds, display only filtering. Signal from the transmitter can be assigned any display value within the display range. Both scaling points are individually adjustable using the push buttons inside the case. Loop-powered - no additional power supply required. Maximum current rating is 40mA and voltage drop of 3 Vdc, unregulated. IP65, NEMA 4X according to EN 60529/IEC 529. CE compliant to EMC norm EN 61326:1997/A1:1998 RFI, EMI and ESD protection. ABS plastic with polycarbonate window case. Type: n-switching Relay. 32 to 122 degree F Ambient temperature effect is +/-0.006 percent full scale. -22 to 176 degree F Storage temperature. For use with NOSHOK 300, 600, 615, 616, and 800 series transmitters

Manufacturer: Fowler Brand: Fowler Model: S_Dial One

Features IP67 protection even with the cable Robust Construction Removable lifting lever included on all models Menu customizable with free software Direct inch/metric conversion High contrast LCD display Lugback included Applications Made for the Machine Shop

Manufacturer: Mahr Federal Brand: Mahr Federal Model: 4337620 Color: Black

Mahr Federal MarCator 1086 R Digital Indicator, with MarConnect has 0 to.5" (0 to 12.5mm) measuring range with selectable resolution to 0.00002" (0.0005mm) for precision results. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB Hubs Simply send your measured data without being caught up between cables directly into Microsoft Office Excel or via a keyboard code into any Windows program. MarCator Digital Indicators with the REFERENCE symbol are equipped with the innovative Reference-System. The zero position just has to be set once: after setting the zero position, the zero remains stored for all further measurements. Therefore, once the caliper is switched ON or the slide is moved the caliper is immediately ready for measurement. The need to reset to zero with a conventional caliper once the caliper is switched on has now become obsolete. Its Large digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. Due to the outstanding IP52 protection against dust and water the Digital Indicator Marcator 1086 R Reference delivers precise and secure results even in the most difficult workshop conditions. The finished plastic components have an excellent outstanding chemical resistance.Digital Indicators are measuring instruments used for measuring small linear distances for the inspection in manufacturing to provide the precise measurements of an object. The electronic digital indicator includes battery.

Manufacturer: Starrett Brand: Starrett Model: 2900-6

Starrett 2900 Electronic Indicators have Innovative True Absolute Sensor Technology to minimize the chance of data loss for exceptional reliability. Built with IP67 protection and customary Starrett quality, they maintain their reliability in hostile shop environments.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-302

.5 In/12.7mm, .00005/.0001/.0005 In/0.001/0.01mm ID-C ABSOLUTE Digimatic Indicator, 3/8 In stem, Lug Back, With SPC Data Output, Peak Hold, ANSI.