Electronic Indicators - Page 5

Manufacturer: INSIZE Brand: INSIZE Model: 2112-101E

Electronic indicator, 5 inch 12 7mm resolution 00005 inch 0/001mm.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-795B

.5 In/12.7mm, .00005 In/0.001mm, ID-S ABSOLUTE Digimatic Indicator, 8mm stem, Flat Back, With SPC Data Output, Dustproof, ISO.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-794

12.7 mm, 0.001 mm, ID-S ABSOLUTE Digimatic Indicator, 8 mm stem, Lug Back, With SPC Data Output, Dustproof, ISO.

Manufacturer: Mahr Federal Brand: Mahr Federal Model: 2034201 Color: Black/Red

UMaxum II the "classic" amongst all measuring instruments, for over 30 years the Maxum and uMaxum series of digital comparators is synonymous for high precision, extreme robustness and exceptional value. This mew generation of inductive digital comparators offer in addition to being robust and highly precise, comforts such as options for extreme values can be saved from dynamic measurements, both a combined digital and analog display and data can be transferred to evaluation equipment. Since most digital indicators are used in a comparative gage the uMaxum is the perfect match of both application and value. The Mahr Federal uMaxum II Digital Indicator 2034201 provides ±.04" (±1.0mm) measuring range, a .46" long stem with a .375" Stem Diameter.With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB HubsAdvanced Functions: Dynamic mode operation: Max, Min, TIR Two point difference measurement – provides comparison of two readings or measuring locations. - Calculate the distance between 2 measured values Multiplier factor for ratio measurements Hold function – holds reading on display until ready to resume measuring Data output with serial number identification capability Data output with selectable continuous output or single request of reading(s).

Manufacturer: Mahr Federal Brand: Mahr Federal Model: 4337650 Color: Black

Mahr Federal MarCator 1086 R Digital Indicator, with MarConnect has 0 to.5" (0 to 12.5mm) measuring range with selectable resolution to 0.00002" (0.0005mm) for precision results. With MarConnect there is no interface required. Data acquisition with MarCom Professional 5.0 now no longer requires an interface box; even so you do not lose the functionality of an interface box. Trouble free connection to measuring instruments. With MarCom all Mahr measuring instruments with MarConnect interfaces RS232, USB or Integrated Wireless can be connected; simply extend the measuring workplace with USB Hubs Simply send your measured data without being caught up between cables directly into Microsoft Office Excel or via a keyboard code into any Windows program. MarCator Digital Indicators with the REFERENCE symbol are equipped with the innovative Reference-System. The zero position just has to be set once: after setting the zero position, the zero remains stored for all further measurements. Therefore, once the caliper is switched ON or the slide is moved the caliper is immediately ready for measurement. The need to reset to zero with a conventional caliper once the caliper is switched on has now become obsolete. Its Large digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. Due to the outstanding IP52 protection against dust and water the Digital Indicator Marcator 1086 R Reference delivers precise and secure results even in the most difficult workshop conditions. The finished plastic components have an excellent outstanding chemical resistance.Digital Indicators are measuring instruments used for measuring small linear distances for the inspection in manufacturing to provide the precise measurements of an object. The electronic digital indicator includes battery.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-406B

Large, easy-to-read LCD. Internal calculations using the simple formula of [F(x) = Ax)] are available. With SPC data output. Stem diameter 3/8" 4-48 UNF (Unified Fine Thread) Thread size. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Battery: SR44 (1 pc.), 938882. Battery life: Approx. 5,000 hours under normal use Dust/Water protection level: IP42 or IP53 (dust-proof type). Measuring force: 0.2N - 0.5N.

Manufacturer: iGaging Brand: iGaging

iGaging ABSOLUTE Technology IndicatorThe iGaging digital electronic indicator with ABSOLUTE encoder always remembers and traces absolute origin zero or preset data. It provides unlimited measuring speed without losing its origin. This indicator will indicate absolute position when turned on. Features:SPC/USB Data PortABSOLUTE encoder technology - Unlimited measuring speed.IP54 ProtectionRead and convert Inch/mm displayOrigin setPreset valueShank diameter: 3/8"Carbide tip4-48 threaded tipFloating lug back2 Years warrantySpecifications:Range: 4"/200mmResolution: 0.0005"/0.01mmAccuracy: 0.001"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 543-400

Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).

Manufacturer: Starrett Brand: Starrett Model: 3600M-5

Electronic Indicators have simple, powerful, easy-to-use functions, all at an attractive price. Versions are available for inch/metric and metric only.

Manufacturer: Mitutoyo America Corporation Brand: Mitutoyo Model: 543-782

Mitutoyo Digimatic Indicator ID-S 543-782, .5 In/12.7mm, .0005 In/0.01mm, 8mm stem, Lug Back, With SPC Data Output.