Test Indicators - Page 22

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-406T

Mitutoyo Horizontal Test Indicator Set, Graduations: .0005"/0.01mm, Range: .030"/0.7mm, Dial Face: 0-15-0/0-35-0, Includes: Test indicator, .039", .079" and .118' carbide contact points, 5/32" and 3/8" stems, clamp nut, swivel clamp, holding bar.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Black

The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P900-S129

Manufacturer: Flexbar Brand: Flexbar

Premium Quality Precision Dial indicators - AGD 2. Made in Japan Features Extremely Smooth Precision Gears inch and Metric Models. Other Features: Contact Point Made of tool steel, Hardened ground and chrome plated. Stem Made of stainless steel

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-005-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

Essential for the workshop, but also in the inspection room or measuring laboratory - Ideal for comparative measurement on a surface plate - Detect form and position errors - Measure axial and radial runouts, especially. Technical features: long range up to 3mm, bidirectional measurin, without reversing lever, continuous two-way clockwise rotation of the pointer, swivelling probe through 180 degree, main pivot on oversize, self-aligning angular bearings, dovetail mounting machined in the indicator body, dull-chrome plated bezel and housing, rotating dial, insensitive to magnetic fields generated in common precision mechanics. Note for use of compac dial test indicators: with the measuring insert lying parallel to the workpiece surface, these dial test indicators give true reading due to the amplification factor to 1:1. In any other measuring position, the effective lever length changes so that the read value need be corrected. With respect to this, also read in the instruction manual. Tesa design swiss made. Standard DIN 2270 and factory standard. Friction lever system to preventing overload. Contact points with tungsten carbide ball tips. Delivery in a suited plastic case. Identification number. Inspection report with a declaration of conformity.

Manufacturer: Westward Brand: Westward

Flex Magnetic Base w/Indicator, Magnetic Pull 85 Lb., Base Size 2 5/8 x 2 1/4 x 2 In., Overall Length 12 In., Switch Type Rotating On/Off, Step Type V, Snug Flex Arm, Finish Chrome/Blue, Includes Universal Clamp and 0.001 In Indicator

Manufacturer: TTC Brand: TTC

An indispensable device for accurate work in tool rooms and in small production jobs for checking flatness, squareness and parallelism. A convenient step of 1-1/4" (32mm) down from the top and a 1/2" (12mm) seat allows for use with smaller workpieces. (2

Manufacturer: Flexbar Brand: Flexbar

Flexbar .200" Break-Away Stylus Electronic Edge Finder. Break-away stylus electronic edge finders will locate work surfaces quickly and easily at almost any angle. No bulbs, all models have 5 LED lights that light on contact with conductive metal surfaces - last for years without replacement. Easy change 12 volt batteries included. Repeatability: +/- .0002. All work surfaces precision ground.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Model: 599-7032-5 Color: Black

The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...