Test Indicators - Page 30

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-415

0.01mm, 1mm, Dial Test Indicator, Gage Only , 0-50-0, 2mm Contact Point, 44.5mm Length, Anti-Magnet, Jeweled Bearing, Long Contact Point.

Manufacturer: ADJUSTOL Brand: ADJUSTOL

ADJUSTOL Adjustol Holders - Model: 200B

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 500-196-30

Electronic Digital, Absolute Digimatic Calipers, MITUTOYO, Measuring Range 0 ~ 6" (0 ~ 150mm)

Manufacturer: Accurate Manufacturing Brand: Accurate Manufacturing

The Zero-Set fits all dovetail equipped indicators, and is used to check the alignment of the centers of round material in relation to the cutting head. Speeds up set-up operations tremendously! Manufactured with 1/4", 3/8", and 1/2" spindle post and has an effective measuring range of 3/8" to 10". Quick adjustments and line adjustment controls. Model AA-9860M is Made by Accurate Manufacturing and will accept the zero-set universal attachment - recently redesigned for even greater precision! Indicator is not included.

Manufacturer: Westward Brand: Westward

Indicator/Magnetic Base Set, Magnetic Pull 85 Lb, Base Size 2 x 2 11/32 x 1 13/16 In, V-Base, Fine Adjust, Rod Dia 2/5 In, Upright Post Dia 0.472 In, Thread Size M8, Switch Type On/Off Lever, Step Type V, Holds Base To Round Surfaces, Snug Swivel Post, Allows Indicator Adjustment Up/Down/Vertical Angle/Complete Circle and any Distance from Base along Gage Holding Rod, (2) 3/8 Inch Diameter Holes, Grips Lug Back or 3/8 Inch Stem, Includes 4KU81 Indicator and 4KU72 Magnetic Base

Manufacturer: Q-Mark Manufacturing Inc. Brand: Q-Mark

M3 stylus, 5.0 mm diameter x 9.0 mm long titanium base, 2.0 mm diameter Therm-X graphite stem, 3.0 mm diameter silicon nitride ball. Overall stylus length is 50.0 mm. Stylus weight is 0.69 gram. Compare to Zeiss 626103-0301-050.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-454E Color: Yellow

The Mitutoyo 513 series dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The vertical face is perpendicular to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The basic set includes a dial indicator, a 2mm carbide contact point, an 8mm diameter stem, a knurled clamp ring, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, non-magnetic pointer and contact point for secure operation in magnetic environments, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the d...

Manufacturer: HHIP Brand: TECLOCK Model: 4409-1002

0-2" Tecklock Dial Indicator .001 Graduation 0-100 Reading 2-3/16" Diameter Group 2 Type Indicator Easy-to-read graduations. Hard saTiN- chrome finish. Spindle rack, pinions and gear trains are Superior quality to ensure longevity. Conforms to AGD specifications. Meets or exceeds applicable federal specifications. Revolution counter. Lug back.

Manufacturer: TECLOCK Brand: TECLOCK

Includes: (1) Fitted case. Travel|Decimal Inch: 0.03" Dial Diameter : 1-3/8" Point Length: 0.54"

Manufacturer: Mahr Federal Inc. Brand: Mahr Federal Model: 4305950

Mahr Federal 801 S MarTest 4305950, 0.001" x ±0.015" Standard Test Indicator, 0-15-0, 1.1 Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.