Test Indicators - Page 28

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M2 stylus, 0.3 mm carbide ball, stepped carbide shaft, 3.0 mm diameter x 5.0 mm long stainless steel base, 19.0 mm overall stylus length. Major shaft diameter is 1.0 mm. Intermediate shaft diameter is 0.50 mm. Minor shaft diameter is 0.20 mm. Stylus weight is 0.34 gram.

Manufacturer: Mahr Brand: Mahr Federal Model: 4307200

Mahr Federal 800 SG MarTest 4307200, 0.01mm x ±0.4mmStandard Test Indicator, 0-40-0, 1.5" Dial Dia., 0.57" styli. Test indicators are invaluable for surface plate layout work when doing comparative measurements. Includes storage case and contact wrench.

Manufacturer: Flexbar Brand: Flexbar

Upgrade your Milling Machine or Lathe to Digital reading. This digimatic scale is designed specifically for convenient display of any axis of a machine tool movement. Precise depth control floating zero allows you to set "zero" anywhere within operating range with a push of a button.

Manufacturer: Brown & Sharpe Brand: Brown & Sharpe

Manufacturer: Q-Mark Manufacturing Inc Brand: Q-Mark

M4 stylus for Blum probe systems. Db = 6.0 mm ruby, L1 = 50.0 mm to ball center, L2 = 30.5 mm to ball center. Compare to Blum P03.8000-010.050.06.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-253-0

The Fowler 52-562-253 Girod horizontal test indicator has a 1" diameter balanced dial, a 0.008" measuring range, 0.0001" graduations, three carbide contact points, a 210-degree swivel range, jeweled bearings in an isolated shockproof assembly, and a one-piece anti-magnetic housing, and is designed to measure surface variations in narrow or recessed areas. The 0-4-0 balanced dial has a total measuring range of 0.008" with 0.0001" graduations. An adjustable bezel and dial sets the zeros the reading at any location. The auto-reverse mechanism has adjustable ball-bearings to provide ultra-smooth lever action. Seven fine, jeweled bearings are housed in an isolated, shockproof assembly that is separate from the outer body to provide protection from the influence of external pressure. Three 0.5" interchangeable carbide contact points have 0.040", 0.080", and 0.120" ball diameters for use on a range of surfaces, and the contact point swivels 210 degrees to reach a variety of locations. Carbide contact points provide durability for surfaces with a hardness rating below that of carbide. Three separate dovetail mounts allow the indicator to be mounted from the top, front, and back of the indicator and two dovetail clamping stems with 7/32" and 1/4" diameter provide a range of clamping options. Anti-magnetic, one-piece body construction is chrome-plated to resist corrosion. The set includes a horizontal-face dial test indicator with a balanced dial, three 0.5" long contact points with one each 0.040", 0.80", and 0.120" diameter carbide tips, one 7/32" diameter dovetail clamping stem, one 1/4" diameter dovetail clamping stem, and a fitted storage case. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than ...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Yellow

The Brown & Sharpe Bestest-13 series dial test indicator set has a yellow face and metric measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow face dial face rotates. The white dial and contrasting black hand help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional millimeters (mm). The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a dial test indicator, a 0.080" (2mm) carbide contact point, a rectangular bar, a swivel clamp, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurem...

Manufacturer: 3m Brand: 3M

Meet the performance criteria for fit testing respirators under the current OSHA standard for respirator protection. Test kits and accessories designed to help your organization meet osha fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: DLP0-1000

Analogue quadrant showing for easy reading High accuracy vial for measuring horizontal level easily Lock the moving blade at any angle Specifications: Blade Length........................10.16'' Resolution..........................0.05°/3 Accuracy.............................0.15° Measuring Range....................360° Work Temperature........+5°C- +45°C Work Humidity...................

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: S906-C456