Test Indicators - Page 23

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-006-0 Color: White

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-424T Color: Yellow

The Mitutoyo 513 series dial test indicator has a yellow face, an 8mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The horizontal face is parallel to the axis of the indicator and three dovetail mounts, and can be mounted either horizontally or vertically from the front, top, or back of the indicator. It has a unified outer frame that prevents oil and water from permeating the front face, a hard frame body that provides rigidity and durability, and a clear, flat, and scratch-resistant crystal face. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (1mm, 2mm, and 3mm), two stems (4mm and 8mm diameter), a knurled clamp ring, a swivel clamp, a 100mm metric holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-282GT Color: White

Measuring force: 0.3N or less, Length: 20mm. It is anti-magnet and jeweled bearing type. Vertical type. Full set includes Indicator, 0.079" Diameter Carbide Contact Point, Knurled Clamp Ring, and 3/8" Diameter Stem, a Swivel Clamp (part number 900322) for 3/8" Diameter dovetail, Inch Holding Bar (900306), two additional Carbide Contact Points (0.039" and 0.118" Diameter) as well as one additional Stem (0.157" Diameter).

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-409T Color: Yellow

Measuring force: 0.3N or less, Length: 14.7mm. It is Anti-magnet type and Jeweled bearing type. Full Set includes Indicator, Knurled Clamp Ring, ø8mm Stem (part number 902804) and ø2mm Carbide Contact Point, as well as ø1mm Carbide Contact Point and ø3mm Carbide Contact Point, ø4mm Stem (part number 190318), 100mm Length Holding Bar (part number 900209) and Swivel Clamp ø4mm, ø8mm, Dovetail (part number 900321).

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: Black

The Brown & Sharpe Bestest-5 series dial test indicator set has a black face and inch measurements. The indicator can make either horizontal or vertical measurements, and the black dial and contrasting white hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a black-face dial test indicator, a 0.080" (2mm) carbide contact point, a 0.250" diameter extension with dovetail, a point wrench, a Certificate of Accuracy and Traceability, and a storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools a...

Manufacturer: Starrett Brand: Starrett Model: 709BZ Color: White

The Starrett dial test indicator without attachments has a Red, black, or white face, and inch measurements. It has a narrow body for use in hard-to-reach areas, and has a choice of red, white, or black dial face for use in a variety of lighting settings. The carbide ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation with automatic reversal helps prevent plus or minus confusion. The ball-bearing lever system with measuring insert swivels through to 210 degrees. The dial has an angled face and three dovetail mounts, and can be mounted horizontally or vertically from the front, top, or back of the indicator. The indicator has a satin chrome finish for durability, and a gear-driven, jeweled movement for accuracy. The contact points are frictionally adjustable and replaceable. This dial test indicator meets or exceeds accuracy and performance requirements of national and international standards, and is traceable to the United States National Institutes of Standards and Technology (NIST). Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of...

Manufacturer: TTC Brand: TTC

I Swivel Support: mounts all indicators with dovetails 3/8" & 1" long shanks; swivels for extra versatility

Manufacturer: Shenzhen Topcod packaging materials co., LTD Brand: TOPCOD Model: HIC5-3DOTB-PK200

Humidity Indicator Card (HIC) provide a low-cost method of indicating humidity conditions inside a moisture barrier bag after vacuum packaging. The indicator spots on the HIC change color from blue to pink as humidity increases and from pink to blue as humidity decreases. Our HIC Meet MIL-I-8836 and JEDEC Standards Offer superior protection, especially when used with our Desiccants and Moisture Barrier Bags. Website :http://www.toppack.com.cn Email:[email protected]

Manufacturer: HHIP Brand: TECLOCK Model: 4409-1001

0-1" Tecklock Dial Indicator .001 Graduation 0-100 Reading 2-3/16" Diameter Group 2 Type Indicator Easy-to-read graduations. Hard saTiN- chrome finish. Spindle rack, pinions and gear trains are Superior quality to ensure longevity. Conforms to AGD specifications. Meets or exceeds applicable federal specifications. Revolution counter. Lug back.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P900-S109

Range: 0.008" Resolution: 0.0001"