|
|
-
4.2 of 5.0 with 31 Reviews
SALE PRICE: $245.00 1% OFF
Manufacturer: Flexbar
Brand: Flexbar
Manufacturer: Flexbar
Brand: Flexbar
Standard Beam Electronic Height Gage features Large, clear LCD display which eliminates errors in Readings. Non-contact Measuring System; oil and chip Proof. Can be Zeroed out at any Height. instant inch/Metric conversion. .0005/.01mm resolution. Carbide Tipped scriber. Fine adjustment mechanism. Battery included. Model No. 15800, Standard Beam Electronic Height Gage. Range: 0-12"/300mm
-
4.2 of 5.0 with 42 Reviews
SALE PRICE: $308.00
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: DBHG-0018
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: DBHG-0018
-
4.2 of 5.0 with 4 Reviews
SALE PRICE: $318.40
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 0103-0603
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: 0103-0603
- Electronic digital height gage. - Power on/off. - Zero-setting at any position. - mm/inch conversion. - Data output. - Presetting. - Carbide-tipped scriber facilitates finescribingpm workpieces. - Clear LCD screen. - The robust construction with a thick column provides highly repeatable measurement. - Fine-adjustment carriage to feed The slider finely.
-
4.2 of 5.0 with 13 Reviews
SALE PRICE: $333.19
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-174-018-0
Manufacturer: Fred V. Fowler Company, Inc.
Brand: Fowler
Model: 52-174-018-0
|
The Fowler 52-174-018 is a height gauge with a Vernier scale, a hand-operated slider, an offset carbide-tipped scriber, a rust-resistant satin chrome finish, a measurement range of 0 to 18" (450mm), and is precise to 0.001" (0.02mm). The adjustable main scale has a full 3/4" adjustment range. Zero setting capability resets to zero or any reference figure at any point for easy reading without special calculations. A calibrated screw mechanism supports fine, uniform slider adjustments. A swing-away magnifier plus extra-long Vernier scales with wide separations in inch and metric provide exact and precise reading. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability, and offset for direct reading over the full range of travel. The satin chrome finish on the scales resists rust and is glare-free. Raised lands on the main scale surfaces prevent friction wear. The hardened stainless steel beam and slide provides durability. The base and measuring surfaces are constructed of hardened tool steel and are ground and microlapped. The base is ergonomically shaped for ease of handling. The gauge comes with the scriber, and a magnifier. Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. The Fred V. Fowler Company manufactures inspection...
-
4.2 of 5.0 with 48 Reviews
SALE PRICE: $353.60
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EDBH-0018
Manufacturer: Accusize Co. Ltd.
Brand: Accusize Industrial Tools
Model: EDBH-0018
0-18" x 0.001" Electronic Digital Double Beam Height Gage, #EDBH-0018 Measuring range: 0-450 mm (0-18'') Resolution: 0.01 mm (0.001'') Repeatability: 0.01 mm Accuracy: 0-200 mm: ±0.03 mm >200-400mm: ±0.04 mm >400-600 mm: ±0.05 mm Hand-wheel drive for easy head displacement Large LCD Display mm/inch conversion On/off switch ABS/INC switchable and hold function Adjustable tolerance markers and indication of display overflow or OK Delivery complete with scriber Power supply: 1 battery (V357) Measuring Range:0-18''/0-450mm; Resolution:0.001''/0.01mm
-
4.2 of 5.0 with 29 Reviews
SALE PRICE: $414.49
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Fowler Standard Outside Anvils for THV and Mini Horizontal 53-190-019
-
4.2 of 5.0 with 16 Reviews
SALE PRICE: $451.44
Manufacturer: Fowler
Brand: Fowler
Manufacturer: Fowler
Brand: Fowler
Fowler 0-20500mm Electronic Height Gage 54-106-020-0
-
4.2 of 5.0 with 13 Reviews
SALE PRICE: $532.00
Manufacturer: INSIZE
Brand: INSIZE
Model: 1156-300
Manufacturer: INSIZE
Brand: INSIZE
Model: 1156-300
Electronic Height gage with driving wheel, 0-12"/0-300mm.
-
4.2 of 5.0 with 46 Reviews
SALE PRICE: $597.65 14% OFF
Manufacturer: Hexagon Metrology
Brand: Standard Gage
Manufacturer: Hexagon Metrology
Brand: Standard Gage
|
The Standard Gage 07724002 dial height gauge has a measurement range of 0†- 24â€, and is graduated to 0.001â€. The dial display has a screw for manual adjustment of the zero position, and travels 0.1†on the beam for each revolution of the needle. The hand-operated slider raises and lowers the gauge on the beam, and a calibrated screw mechanism supports fine, uniform slider adjustments. A lock screw allows the user to hold measurements. The beam is graduated in standard inch units and made of stainless steel. The scriber, used to mark a position on a workpiece, is 8 mm x 57 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. The grip-base helps hold the unit in position by hand. The height gauge comes with a fitted case and inspection report. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Standard Gage manufactures precision measuring equipment and metrology hand tools, and is a product line by Hexagon Metrology. Standard Gage is headquartered in North Kingstown, RI. What’s in the Box? Standard Gage 07724002 Dial Height Gauge Fitted case Inspection report
-
4.2 of 5.0 with 36 Reviews
SALE PRICE: $687.00
Manufacturer: Starrett
Brand: Starrett
Model: 3259-24
Manufacturer: Starrett
Brand: Starrett
Model: 3259-24
|
The Starrett stainless steel dual post dial height gauge has up/down counters that can be reset, a hand-operated feed wheel, a carbide-tipped scriber, and a glare-free rust-resistant, satin chrome finish. The dial gauge has distinct, easily read figures for precise measurement in gradations of 0.001". A lock holds the slide in position. Two separate digital counters register upward and downward travel. Zero setting capability resets to zero at any point for easy reading without special calculations. The gauge is lowered and raised smoothly and evenly on the dual beams by a hand-operated feed wheel with coarse and fine adjustment. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and long life. The satin chrome finish on the scales resists rust and is glare-free. The base is ergonomically shaped for ease of handling and is hardened, ground, and lapped for maximum flatness.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company, founded in 1880, is headquartered in Athol, MA.
|
|