Height Gauges - Page 17

Manufacturer: Fowler Brand: Fowler

Fowler Case For 54-110-340 54-110-440-0

Manufacturer: Westward Brand: Westward

Height Gage, Electronic Digital, Range 0-18 In/0-450mm, Resolution 0.0005 In/0.01mm, Accuracy +/-0.002 In, Display LCD, Features Zero Set, Preset, Hold/Data, Inch/Millimeter, Data Output, Construction Steel, Base Cast Iron, Screw Clamp Lever Locks Scriber at Any Position, Mechanism Feed Wheel, Battery CR2032, Includes Carbide Tip Scriber

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 192-671-10

The Mitutoyo 192-671-10 LCD Digimatic height gauge displays in inches or metric units within a range of 0” to 18” (0 - 450 mm), has an LCD digital readout with selectable resolution of 0.0005” (0.01mm) or 0.0002” (0.005mm), with + or - 0.0015” (0.04 mm) of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset up to two reference heights at any position, hold data at any position, compensate for probe diameter, as well as set a temporary zero position and return to a true zero reading. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for SPC. The gauge has a plug to receive input from an electronic touch probe (not included) for efficient digital measurement. The scriber, used to mark a position on a workpiece, is 45.7 mm x 150 mm (H x L), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. A dual-column beam provides stability that helps promote accurate measurements. A hand-operated feed wheel raises and lowers the gauge on the beam for ease of measurement, and is selectable for coarse or fine travel. The grip-base helps hold the unit in position by hand. The height gauge weighs 16.54 lbs/7.5 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workp...

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-HG-SCB-300

Spare scriber bit for 300mm Height gage, Carbide-tipped scribe for marking out. Hardened stainless steel arm with carbide tip. Suitable for the 300mm height gage. Machine-DRO History - A division of Allendale Electronics, a family run British company founded in 2004. Our roots are firmly based in the UK, with a head office, engineering and inspection department at our works in Hoddesdon, Hertfordshire. We pride ourselves on being a measuring tool specialists offering tools, services, advice and expertise to our end customers and international distributor network.

Manufacturer: Generic Brand: Generic

One tool does the layout and measuring work of several others. Multi-Function Height/Depth Gauge is primarily used to set table saw blade height from tabletop, fence-to-sawblade distance and miter-slot-to-blade alignment as well as establish router bit and drill press depths and drill bit stop locations, set radial arm saw dado depth and blade height from tabletop, but it also performs a number of other important jobs: Use gauge to mark or scribe a line - mark straight lines up to 5" from board edges and set up your band saw and shaper table, too. Depth rod measures up to 5" for dadoes, slots, dowel and screw holes and in tight spots. 6-1/8"H x 1-1/2"TH x 4-3/8"W - engineered reinforced polymer and steel/brass construction. Photo engraved, tempered stainless steel 5" scale is marked in precise 1/32" increments. All measurements are read on just one scale - reverse scale for millimeters up to 12.5cm. Magnetic base ensures secure grip on ferrous metal surfaces. Includes hex wrench and complete calibration and use instructions. Imported. U.S. Patent No. UM-77013 and 5,491,907.

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-IM-GAU-1-4

Specifications:Range: 0-1/4 inch Dial Diameter: 1 3/4 inches Graduation: 0.001 inchesStem Diameter: 3/8 inches, Lug Mounting Diameter: 1/4 inchesOverall Length: 3.3 inches,

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-IM-GAU-1

0-1 inch Range Imperial Dial Indicator Gauge with 2 inch diameter dial.

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-BG-14-24I

An outside micrometer, setting ring or slip gauges can be used to calibrate the bore gauge - The bore gauge has a knurled lock nut to secure the anvils and spacers. There is a sprung loaded guide used to centralize the two measuring contact points to the bore. At the opposite end of the gauge there is a heat insulating handle with a split collet and knurled locking ring to secure the dial indicator. Included with the bore gauge - Probe body, Dial indicator, 6 Anvils, 4 Spacer rings, 2 inch extension, Wooden storage case and Instructions Key Specifications Measuring Range- 1.4 - 2.5 inch. strong>Probe Length - 6 inch (150mm). strong>Dial Diameter - 2 inch (55mm). Resolution - 0.0005 inch.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: ABHO-0006

mm/inch conversion Max. measuring speed: 1m/s ABS/INC switchable Reset/preset On/off switch Delivery complete with mounting material Power supply: 1 battery(V357) Can be used with 3-Axis DRO Display (1104-0110V) or one Axis DRO position #1104-8111 or individually

Manufacturer: Machine DRO Brand: Machine DRO Model: ME-HG-PRO-300

Functions include metric/ imperial display, on/ zero button, off button, and a set datum function. Supplied with the height gauge - Carbide scribe tip, tip holder, and screwdriver for the battery cover. Weight - approximately 7kg Base size - L:170 x W:125 x D:52mm Column thickness - 35 x 15mm Overall height - 540mm Resolution - 0.01mm/ 0.0005" Battery - SR44 This is Machine-DRO's most advanced own brand height gauge, made from heavy duty hardened stainless steel and a robust cast iron base. The reading head has a large screen and buttons for easy usage as well as a fine adjustment thumb-wheel, locking lever and an easy operation hand-wheel to aid with fine measuring. The linear encoder eliminates over-speed errors and the thick rigid column structure ensures quality and accuracy whilst measuring.