Height Gauges - Page 19

Manufacturer: Fowler Brand: Fowler

Measuring Range 0 ~ 12" Type of Reading LCD display

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-174-212-1

The Fowler electronic chrome-plated twin-beam height gauge has a measurement range of 0 to 24" (600mm), a high-contrast LCD readout precise to 0.001" (0.01mm), an accuracy of + or – 0.002", a hand-operated slider, a carbide-tipped scriber, and a rust-resistant satin chrome finish. A calibrated screw mechanism supports coarse and fine, uniform slider adjustments. A large, hand-operated feed wheel raises and lowers the gauge on the beams with smooth, even travel, and is selectable for coarse or fine feed. The gauge has a hold function to freeze recordings on the display, and a zero setting function. Relative and absolute measuring functions allow measurements of the true size or comparison measurements of parts to a master. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability. The gauge is powered by one SR44 1.55V silver oxide battery (sold separately) that provides up to one year of normal use. The display flashes to indicate when battery replacement is needed. The gauge has a working environment temperature of 32 to 104 degrees F (0 to 40 degrees C) with a surrounding relative humidity of 80 percent. Storage and transport temperature is -4 to 158 degrees F (-20 to 70 degrees C). The satin chrome finish on the scales resists rust and is glare-free. The base is hardened, ground, and lapped for maximum flatness. The scriber on this height gauge can be removed and replaced with the included indicator holder, which accepts a 3/8" indicator stem or a dovetail to attach instruments such as a test indicator to measure squareness. The height gauge also comes with a molded case.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from ...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 570-244

The Mitutoyo 570-244 electronic height gauge has a measurement range of 0 to 8" (200mm), a high-contrast LCD readout, a precision of 0.0005" (0.01mm), an accuracy of + or – 0.001", a hand-operated slider, an electrostatic capacitance linear encoder, and a carbide-tipped scriber. A calibrated screw mechanism supports fine, uniform slider adjustments. The hold function freezes recordings on the display. Relative and absolute measuring functions allow measurements of the true size or comparison measurements of parts to a master. An electrostatic capacitance linear encoder prevents overspeed errors to ensure reliable, precise measurement. The included scriber, used to mark position on the workpiece, is carbide-tipped for hardness and durability. The gauge is powered by one SR44 1.55V silver oxide battery (sold separately) that provides approximately 5000 hours of normal use. An alarm indicates when battery replacement is needed. The gauge has a working environment temperature of 32 to 104 degrees F (0 to 40 degrees C). Storage and transport temperature is 14 to 140 degrees F (-10 to 60 degrees C). The satin chrome finish on the scales resists rust and is glare-free. The base is ergonomically shaped for ease of handling. The height gauge also comes with a scriber clamp.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufact...

Manufacturer: INSIZE Brand: INSIZE Model: 1151-300

Electronic Height gage, 0-12"/0-300mm.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-174-224-1

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Flexbar Brand: Flexbar

A versatile Measurement System for internal pitch Diameters, as well as internal bores, Grooves, recesses and internal gears. Major Features: Major breakthrough in utilizing computer Software With a Measuring instrument. With this new concept, accurate Measurements of internal Threads and compensation calculations for Ball Diameter variations or lead Angles are Made extremely simple. The Software diskettes supplied With the IPD Gage Can be used in any IBM compatible PC to obtain All data required for accurate inspection of any specific internal Thread Without the necessity of a master Gage. Easy to Set IPD Gage With Micrometer or Gage Blocks, etc. Universal, Can be used as general purpose internal Gage for Measuring bores, Grooves and pitch Diameters of Screw Threads and internal gears, etc. indicator alone, With the included Adapter, Extensions and contact Points, make it possible to Measure internal Threads and bores from 7+" to 18". Precision Made in U.S.A. Rigid construction Plus Special High Precision pivot bearings assure repeatability of .0002" or less. Balanced Body design for easy and convenient handling. Adjustable contact pressure. Carbide Ball contact Points are optional, Not included. System includes internal Gage, 1" Travel indicator, indicator-Adapter, 8 Extensions (1/4", 3/8", 1/2", 3/4", 1", 2", 3" and 4" Long), Measuring Tip organizer, 2 Standard contact Points 1/4" Long, Allen Wrench, fitted Case Plus Software casSette for internal pitch Diameter Threads and instruction manual. Specifications: Measuring Range: Bores- .93" to 8" Nominal Size Threads- 1 1/8" to 8" Extended Range With included indicator Adapter- 7 1/2" to 18" Gage Arm Travel - .625" Maximum reach in 1-1/4" Dia. bore- 4.8" 1" Travel indicator Graduation- .0005" The IPD Software complies With ANSI Standards; fully compensates for the effects of lead Angle. On screen explanation, No commands to remember. Error free data entry, will detect invalid input data.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 514-105

The Mitutoyo 514-105 vernier height gauge has a measurement range of 0” - 18"/0 - 450 mm, and is graduated in both inches and metric to 0.001”/0.02 mm, with + or – 0.002”/0.05 mm of accuracy. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for secure fastening. The grip-base helps hold the unit in position by hand. An adjustable beam with a ring-type lock nut supports repositioning of the zero reference point for manual change of the base position. The slider and beam are made of hardened stainless steel, with a glare-free satin chrome finish that helps resist rust. The height gauge weighs 7.5 lbs/3.4 kg. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 514-106

The Mitutoyo 514-106 vernier height gauge has a measurement range of 0 - 600 mm, and is graduated to 0.02 mm, with + or - 0.05 mm of accuracy. The scriber, used to mark a position on a workpiece, is 32 mm x 80 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for secure fastening. The grip-base helps hold the unit in position by hand. An adjustable beam with a ring-type lock nut supports repositioning of the zero reference point for manual change of the base position. The slider and beam are made of hardened stainless steel, with a glare-free satin chrome finish that helps resist rust. The height gauge weighs 16.31 lbs/7.4 kg. A vernier scale provides precise measurement through a second sliding scale that indicates where measurement lies between marks on the main scale. A calibrated screw mechanism supports fine, uniform slider adjustments. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 570-248

The Mitutoyo 570-248 LCD Absolute Digimatic height gauge has a measurement range of 0” - 40”/1000 mm, a high-contrast LCD digital readout precise to 0.0005”/0.01 mm, with + or - 0.003”/0.07 mm of accuracy, and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). This height gauge has an electronic microprocessor providing the ability to preset a reference height at any position, as well as set a temporary zero position and return to a true zero reading. The LCD display is selectable to display either inch or metric units. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable (not included) for statistical process control (SPC). An electrostatic capacitance linear encoder helps prevents overspeed errors to help ensure repeatable, precise measurement. The scriber, used to mark a position on a workpiece, is 25 mm x 47 mm (H x W), carbide-tipped for hardness and to help prolong life, and is held to the gauge by a screw clamp for fastening ease. A calibrated screw mechanism supports fine, uniform slider adjustments. The grip-base helps hold the unit in position by hand. The height gauge weighs 37.04 lbs/16.8 kg. The unit comes with an SR44 battery. Height gauges, also called gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machi...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe TESA 04765008 thermal paper roll has a chemical coating on one side that changes color when exposed to heat, and is used with the Brown & Sharpe TESA power panel plus M with built-in thermal matrix printer. The paper roll measures 57mm wide x 22.5m in length. The thermal paper roll is an accessory for use with Brown & Sharpe TESA power panels with an integrated thermal matrix printer, which take one- and two-dimensional measurements, and print reports in A4 format with related tables and graphics.Height gauges, sometimes referred to as gages, are precision measuring instruments that travel on a vertical column (also called the beam) to measure and/or mark the vertical distance from the base of an object in fine units. The vertical position of the gauge and its attached pointer are changed by turning a calibrated screw, or one or more feed wheels. Recorded rotations are read from a scale, a dial, counters, and/or an electronic display. A screw clamp holds the pointer to the gauge. The pointer is typically sharpened to act as a scriber, and can be used to mark a position on a workpiece by scratching its surface. On compatible units, the scriber may be replaced by an electronic touch-signal probe. Height gauges are typically used in manufacturing, machining, and mechanical engineering.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI.