Dial Calipers - Page 15

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-253-003-1

The Fowler 52-253-003-1 Vernier-scale micrometer has a 0.256" diameter flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.001" graduation intervals and 0.0002" accuracy for precise and accurate readings. The carbide-tipped anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00012" parallelism for accurate measurements. The positive locking lever on the spindle locks measurements in place for accurate readings. Ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet stop thimble can be used independently of the thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing long life, and microfine graduations help ensure accurate readings. The micrometer includes a wrench and a fitted case. Micrometers 2" and above include a standard. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Specifications Display type Vernier Anvil/spindle style Flat Measuring range 2-3” Graduation interval 0.001" Accuracy 0.0002” Thimble style Ratchet Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00012" Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are thre...

Manufacturer: RCBS Brand: RCBS Model: 87305 Color: 0

RCBS four way measurement stainless steel 87305 dial caliper 6 inch capacity. Hunting reloading case prep tools. Made of the highest quality materials

Manufacturer: ToolUSA Brand: ToolUSA

Here's A Reliable 6" Stainless Steel Caliper With A 0.001" Increment Dial, 0-1" Micrometer That Is Divided To 0.025" Increment Meter On The Rod Or Even More Finely Divides 0.1" Into 25 With The Turning Knob (0.004"), And A 6" Micro-ruler With 64th Increment In A Handy Carrying Red Plastic Case. Case Measures 11" X 5" X 1.5". * 3 Piece Set * 6" Stainless Steel Caliper ; 0.001 Graduation * 0-1" Micrometer; Carbide tipped Anvil: 0.004mm * 6" Flex Ruler : mm, inch * Case Overall dimension: 12''L x 4''W x 1.25''H BLACK FRIDAY Specials -Cyber Monday & Holiday Deal

Manufacturer: WIHA Brand: Wiha Model: 41105

Wiha 41105 inch, dial-max caliper. Non-metallic high tech material with 60 percent fiber glass content. For outside, inside, depth and step measurements. Impact resistant dial can be recalibrated to zero.

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: GA10-3001

Jaw width: 25mm Jaw Height: 9.3mm

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-253-006-1

The Fowler 52-253-006-1 Vernier-scale micrometer has a 0.256" diameter flat anvil/spindle pair for general purpose measuring. The Vernier scale has 0.001" graduation intervals and 0.00024" accuracy for precise and accurate readings. The carbide-tipped anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00016" parallelism for accurate measurements. The positive locking lever on the spindle locks measurements in place for accurate readings. Ratchet stop applies constant force for repeatability between users. Friction-style thimbles are suitable for one-handed operation and stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The ratchet stop thimble can be used independently of the thimble. It provides an audible sound and stops the spindle from turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. A satin chrome finish on the thimble and sleeve helps reduce rust and glare, providing long life, and microfine graduations help ensure accurate readings. The micrometer includes a wrench and a fitted case. Micrometers 2" and above include a standard. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Specifications Display type Vernier Anvil/spindle style Flat Measuring range 5-6” Graduation interval 0.001" Accuracy 0.00024” Thimble style Ratchet Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00016" Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are thre...

Manufacturer: Ridgerock Tools Inc. Brand: Neiko Model: 20720A

The harmonic balancer puller and holding tool set is ideal for later model engines that need to have their harmonic balancer replaced. The three jaw puller tool allows you to grip on the balancer and remove it efficiently without damaging the surface underneath or taking out the radiator. The set also comes with a holding tool while loosening or tightening the bolt of the crankshaft and three forcing rods that are are neatly stored in a hard plastic carrying case.

Manufacturer: Tools & Outdoor Gear Brand: General Tools & Instruments

Our Plastic Dial Calipers offer precision measurements at affordable prices, making them a great choice for hobbyists and do-it-yourselfers. This metric-reading caliper features a no-glare dial for accurate readings of inside, outside, depth and step measurements up to 0.1mm. The slide is easily advanced and retracted with a free-wheeling thumb roller, and the 6-inch bar scale is marked with 1/16-inch and 10mm graduations.

Manufacturer: Generic

-Graduations: 001'' per line, 0.1'' per revolution -Includes a padded case and 2 stems- 7/32" & 1/4" -Dovetail mounting on top, back, and front -0 - 100 Dial Reading with Revolution Counter -Easy to read aluminum dial face with anti-glare finish -Durable satin chrome finish -Spindle rack pinions and gear trains are made of high quality steel components ensuring long life -Vertical lug back configuration -V-Groove base allows mounting it on cylindrical surfaces -Point Set: Choose the right end for your indicator to fit the surface from this 22 pc set. -22 pc Popular assorted points in handy storage case -This item features magnetic base, upright post swivel, upright post, swivel snug, gauge rod, and indicator clamp.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-140-008-1

The Fowler 52-140-008-1 Stainless Steel Vernier Depth Gauge has a measurement range of 0 to 8", and a resolution (or smallest graduation interval) of 0.001", with + or – 0.001" of accuracy. The vernier scale and gauge with a positive locking set screw provides precise, fine measurement. The unit has an extra wide base of 0.325" wide x 4" long for stability and accurate measurements. It has extra fine black graduations on satin chrome finish for readability. The gauge has a ground, hardened, and lapped base for durability and accuracy. The gauge conforms to Federal Accuracy specifications. It weighs 0 .7 lb. with the fitted case, included. Depth gauges are typically used in manufacturing, machining, and mechanical engineering. Depth gauges are precision measuring instruments used to determine the depth of any shape that has a step, groove, or slot. These gauges often take the form of sliders that travel on a measuring beam or rods, are moved to position by hand, and then adjusted with a calibrated screw. The base of the gauge rests at the top of the shape whose recession is to be measured, while the beam or rods extend to the bottom of the recession to determine the measurement. Gauge position is read from a graduated scale, dial, counters, or an electronic display.The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.What's in the Box?Fowler 52-140-008-1 depth gaugeCase