Dial Calipers - Page 17

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-675-55 Color: Orange

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial whose pointer travels one rotation for each 0.1” measured to perform precise outside diameter (OD), inside diameter (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.1”. The smooth-moving dial is graduated to 0.001” and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured....

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-422-074-0

The Fowler Wyler bullseye level is a circular spirit level for determining horizontal plane simultaneously in all directions and has three mounting holes for attaching to machinery and other equipment. The level has a sensitivity of 20 to 30 minutes. It has a glass face with a center marking for finding level and a stainless steel frame for durability and corrosion resistance. Levels are used in the building trades, engineering, surveying, and metalworking, among other applications. Levels are instruments that are used to determine the true horizontal or vertical plane of a surface. The most common type of level is the spirit level, or bubble level. Spirit levels have a liquid-filled, bowed tube (also called a vial) with a bubble that moves when slight adjustments are made to the level. When the bubble settles between marked points on the vial, it indicates that a surface is horizontally or vertically straight. Levels can have one or more vials to determine the horizontal plane, the vertical plane, or various points between, such as a 45-degree angle, simultaneously. Some levels include a laser line indicator that projects a horizontal or vertical beam on a surface. Bullseye levels, or surface levels, are circular, flat-bottomed spirit levels that determine whether a surface plane is level. Machinists’ levels are made of metal and have surfaces designed specifically for rugged use in a machine shop or tool room. Levels can range from highly-complex and accurate machines, such as those used in the surveying and construction industry, to precision instruments used in carpentry and other building trades, to simple, pocket-sized devices for do-it-yourself projects. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-100-332-0

The Fowler Euro-Cal IV digital caliper has an accuracy of +/-.0015"/.03mm with 0.0005"/0.01mm resolution, with fractions in 1/64" increments for precise measurements, and it has a hardened stainless steel frame. The digital, single-value readout LCD shows inch, metric, and fractional units for versatility when measuring. It has a zero setting and absolute and incremental measuring modes for taking intermediate or differential measurements and direct metric/inch conversion. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. The hardened stainless steel frame offers corrosion resistance and long life. The caliper is rated to IP54 level of protection against dust and splashing water. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. It comes with a fitted case. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are more fragile me...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-677 Color: White

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial whose pointer travels one rotation for each 0.1” measured to perform precise outside diameter (OD), inside diameter (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.1”. The smooth-moving dial is graduated to 0.001” and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measure...

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MAW4003

Moore and Wright HistoryFounded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineers tools.

Manufacturer: Starrett Brand: Starrett Model: 943

Starrett 943 deluxe padded case for 6” dial calipers is an appealing yet protective steel case, covered in red vinyl. The interior is charcoal-colored foam, fitted to provide maximum protection for the tool inside. The vinyl helps to protect the case from scuffs. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making precision measurement instruments and tools, such as calipers, micrometers, saw blades, and gauges. Starrett is headquartered in Athol, Massachusetts and has manufacturing facilities in Brazil, the United Kingdom, China, and other locations.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-526-333-0

The Fowler 52-526-333 Indicator Point Extension Kit includes three indicator points that have 4-48 UNF internal and external threads, are constructed of cold-rolled steel and black oxide plating, and are designed to extend the reach of standard indicator contact points. The kit includes one each of 1", 2", and 3" indicator point extenders that are designed for use with dial, electronic and test indicators and indicator points that have a 4-48 UNF threads. The extenders are made from cold-rolled steel and have a black oxide plating that provides durability and rust-resistance. Test indicator gauges, also called gages, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as small variations in flatness or height of an inspected workpiece, and permit measurement in narrow grooves or small bores. A test indicator gauge consists of a ball-tipped contact point on a levered arm, also called a measuring insert, which pivots from a hinge point. The reading indicates the degree of angular displacement of the arm. Test indicator gauges are commonly used in manufacturing, machining, and mechanical engineering. Standard test indicators measure the displacement of the arm perpendicular to the axis of the indicator. Dial and electronic indicators are very similar to test indicators, except that the axis of measurement is parallel to the axis of the indicator. Test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The Fred V. Fowler Company manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA. What’s in the Box? 1" indicator point extension 2" indicator point extension 3" indicator point extension

Manufacturer: Machine DRO Brand: Machine DRO Model: ME-CAL-IM-DIAL-6

Resolution - 0.001" Range - 0-6". Machine-DRO History - A division of Allendale Electronics, a family run British company founded in 2004. Our roots are firmly based in the UK, with a head office, engineering and inspection department at our works in Hoddesdon, Hertfordshire. We pride ourselves on being a measuring tool specialists offering tools, services, advice and expertise to our end customers and international distributor network.

Manufacturer: Generic

Manufacturer: Fred V Fowler Brand: Fowler Model: 74-101-150-2

Supersedes Fowler p/n 74-101-150-1Stainless steel frame.Large easy-to-read display.Resolution: .0005".Direct inch/metric conversion.Absolute/incremental measurement.4 way measuring.Complete in case.Fowler 74-101-150-2 Xtra Value Electronic Caliper - 6" / 150mm