Dial Calipers - Page 3

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-VT150

The scale is supplied with - slotted mounting brackets that clamp to each end of the scale. These can easily be removed allowing the scale to be cut to any length. Also supplied is a bracket for the rear of the reading head, attached by two M3 screws which are supplied.

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-PLUN-20

There is also an external data output interface via data cable (not supplied). The indicator has a mounting lug with two 6mm diameter fixing holes. One in the front and the other in the side of the lug. On the under side is a thumb screw to lock the indicator. A mounting stem is also supplied which fits into the lug to provide another mounting option. Key Specifications Measuring range - 20mm (13/16) Plunger force - 1.8N Overall length - 100mm (3 15/16") Resolution - 0.01mm (0.0005") Battery - 1.55V SR44 Working Temperature - 0 ~ +40C

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-008-007-0 Color: White

The Fowler One-Rev stainless steel dial caliper has dial graduations of 0.001" with 0.001" accuracy, a sliding jaw with a lock, and a covered rack. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step.The caliper measures 0.10" per revolution of the dial. The dial has 0.001" graduations, and the beam has engraved 0.10" graduations. The hardened stainless steel components, including the bar, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. Spring anti-backlash control offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case.Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to measure inside, outside, and step measurements in standard or metric units. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides alon...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-585-105-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-603-303-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Wotefusi Brand: Wotefusi

Description: 6" 150mm Electronic Digital Vernier Caliper Specifications Range: 0mm to 150mm/ 0inch to 6inch Resolution: 0.02mm Package Including: 1x Digital Caliper(no battery)

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-HZ300

The slotted mounting brackets that clamp to each end of the scale can easily be removed allowing the scale to be cut to any length. Also supplied is a bracket for the rear of the reading head, attached by two M3 screws which are supplied. Using the inch/mm button on the reading head also included is a zero button and on/off button. Included With The Scale - Mounting brackets for the scale beam, Reading Head mounting bracket, Manual, Battery.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-575-125-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-101-600-1

The Fowler Xtra-Value Cal digital caliper has accuracy of 0.001"/0.02mm with 0.0005"/0.01mm resolution, and it has a hardened stainless steel frame. The digital, single-value readout LCD shows inch and metric units for versatility when measuring. This caliper has a zero setting and absolute and incremental modes for taking intermediate or differential measurements. It has direct metric/inch conversion for versatility. The knurled lock screw holds the sliding jaw in position and helps ensure a consistent measurement. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. It comes with a vinyl pouch for storage.Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are more fragile mechanically and electronically, and do not resist coolant well. Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read. Digital calipers are commonly used in fields such as metalworking, mechanical engineering, machining, carpentry, and medicine.The Fred V. Fow...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-008-709-0 Color: Yellow

The Fowler Shockproof stainless steel dial caliper has dial graduations of 0.02mm with 0.02mm accuracy, shockproof anti-backlash control, a sliding jaw with a lock, and a covered rack. This caliper is used for measuring inside dimensions (ID), outside dimensions (OD), depth, and step. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Shockproof spring anti-backlash control with a heavy-duty spring offers increased accuracy over standard gear configurations. Backlash is the amount of clearance between mated gear teeth in the caliper controls that prevents the gear teeth from jamming. It is undesirable to have much backlash due to the lack of precision offered by the increased amount of play between gears. Certain gear designs can minimize or eliminate backlash; spring anti-backlash systems use a spring to add a compressive force, thereby minimizing backlash. This caliper has a knurled lock screw to hold the sliding jaw in position and help ensure a consistent measurement. A covered rack prevents dirt and debris from clogging the gear, and helps prevent measurement errors. A thumb-operated fine adjustment roller allows for one-handed use. The caliper measures 2mm per revolution of the dial. The dial has .02mm graduations, and the beam has engraved 1mm graduations. The hardened stainless steel components, including the beam, measuring surfaces, rack, gears, and depth rod, offer corrosion resistance, increased accuracy, and long life. Self-contained movement eliminates gear misalignment, while the dual pinion drive mechanism reduces wear on the rack and pinion. An adjustable dial enables setting zero. The hardened stainless steel is polished to a satin chrome finish, to help prevent glare. This caliper comes with a fitted case. Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is u...