Dial Calipers - Page 6

Manufacturer: SRA Measurement Brand: Machine DRO

Key Specifications Measuring Range - 0-500mm (20 inches). Resolution - 0.01mm (0.0005"). LCD Display - 14mm character height. Battery - 1.55V SR44. Working Temperature - 0 ~ +40C.

Manufacturer: Machine DRO Brand: Machine DRO

Resolution - 0.01mm (0.0005") LCD Display - 14mm character height Battery - CR2032 Machine-DRO History - A division of Allendale Electronics, a family run British company founded in 2004. Our roots are firmly based in the UK, with a head office, engineering and inspection department at our works in Hoddesdon, Hertfordshire. We pride ourselves on being a measuring tool specialists offering tools, services, advice and expertise to our end customers and international distributor network.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-580-030-0

The Fowler 52-580-030-0 workshop black granite stand is ideal for shop-floor use. It has a 6" x "6" x 2" granite base with 0.00005" flatness. Accepts indicators with lug backs and features a fine adjust with fingertip control. Column height is 8". It also features a positive lock screw to hold settings in position securely. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages and digital scales. The company founded in 1946, is headquartered in Newton, MA.

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-999-0

The Fowler 52-562-999 horizontal test indicator has a 1.125" diameter black face balanced dial, a 0.030" measuring range, 0.0005" graduations, two carbide contact points, and jeweled bearings, and is designed to measure surface variations in narrow or recessed areas. The black face has a contrasting hand to make measurements easy to read. The 0-15-0 balanced dial has a total measuring range of 0.030" with 0.0005" graduations. The auto-reverse mechanism and jeweled bearings provide accurate measurements. Two interchangeable carbide contacts points 0.40" long have 0.040" and 0.080" ball diameters for use on a range of surfaces. Carbide contact points provide durability for surfaces with a hardness rating below that of carbide. Three separate dovetail mounts allow the indicator to be mounted from the top, front, and back of the indicator and two dovetail clamping stems 3/8" and 1/4" in diameter provide a range of clamping options. The set includes a horizontal-face dial test indicator, a Certificate of Calibration, one 0.080" contact point, one 0.040" contact point, a universal clamp, a height gage attachment, a 3/8" dovetail clamp, a 1/4" dovetail clamp, and a fitted case. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. SpecificationsDial face type and diameter 1.125" diameter horizontal face Dial type and reading Balanced 0-15-0 dial with black face Range and graduations 0.030" range with 0.0005" graduations Mechanism Auto-reverse mechanism with jeweled bearings Contact point construction Carbide contact point Contact point length 0.40" Contact point diameter 0.040", 0.080" Mounting type Dovetail mount on top, front, and back Dovetail stem diameters 3...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-675-54 Color: Red

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial whose pointer travels one rotation for each 0.1” measured to perform precise outside diameter (OD), inside diameter (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.1”. The smooth-moving dial is graduated to 0.001” and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured....

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-850-003-0

The Fowler 54-850 series digital outside micrometer has a flat anvil/spindle pair, a choice of measuring range, an LCD with an inch/metric switchable resolution, and is designed for general purpose measuring. A switchable resolution of 0.00005" and 0.001mm, and an accuracy of 0.00016" on 1 to 2" micrometers provide precise readings and accurate measurements. A friction thimble provides smooth and quiet operations, and is suitable for one-handed operation. Friction-style thimbles stop turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The insulated steel housing provides durability, and an ABS (acrylonitrile butadiene styrene) housing protects electronic components against impact and provides electrical insulation. The LCD has a hold feature that saves the reading for recording. The micrometer can be set to take absolute or incremental measurements. Absolute measurements provide the total dimension of the workpiece. Incremental measurements provide a reading that shows the difference between a set standard and workpiece being measured. This type of reading is often used to determine if a workpiece falls within tolerance levels. An automatic shut-off feature extends battery life. RS-232 output transfers data to a computer (cable not included). The micrometer requires a Type 357 battery (included), and includes a wrench and a fitted case. Micrometers 2" and above include a standard. SpecificationsDisplay typeLCDAnvil/spindle styleFlatMeasuring rangeVariesResolution0.00005"/0.001mmAccuracy0.00016" on 0 to 1" micrometersThimble styleFrictionData outputRS-232SpecificationsIP54PowerType 357 batteryMicrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dial. Micrometers are typically used in manufacturing, machining, and mechanical engineering. There are three types of micromete...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 53-762-101-0

Fowler's Portable Durometer is just right for testing the hardness of flexible materials such as rubber and plastics. These gages conform to shore scales. Test pieces should have a thickness of at least .20"/5mm to provide accurate readings that conform to Shore A hardness scales and at least .12"/3mm for Shore D hardness scales. Manufactured in accordance with DIN, ASTM, ISO and JIS specifications. This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.   Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.

Manufacturer: Moore and Wright Brand: Moore & Wright

Rule thickness - 1mm Front graduations - 1/16th, 1/32nd, 1/64th, 1/10th, 1/20th, 1/50th, 1/100th of an inch Rear graduations - 0.5mm, 1.0mm Moore and Wright HistoryFounded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineer's tools

Manufacturer: General Tools Mfg Brand: General Tools Model: 132ME

SLIDE CALIPER 3"

Manufacturer: Generic